Ọrọ Iṣaaju
This manual provides detailed instructions for the Tokluck PSVR2 Controller Charging Dock and Display Stand. This device is designed to simultaneously charge two PSVR2 Sense controllers and provide a stable display stand for your PSVR2 headset, helping to keep your gaming area organized and your controllers ready for use.
Image: The Tokluck PSVR2 Controller Charging Dock and Display Stand, showcasing its design for charging two controllers and holding the VR headset.
Ṣeto
Follow these steps to assemble and set up your charging dock:
- Insert the supporting rod to the base: Align the supporting rod with the slot in the base unit and gently push it in until it is securely seated.
- Connect the top tray: Place the VR2 headset holder (top tray) onto the top of the supporting rod, ensuring it clicks into place.
- Insert the Type-C magnetic connector into controller: Before charging, insert the small Type-C magnetic dongles into the charging port of each PS VR2 Sense controller. These dongles facilitate magnetic charging.
- Put the controller to the charging slot: Gently place the PS VR2 controllers into the designated charging slots on the base. The magnetic connection will automatically align.
- Put the PS VR2 headset into top tray: Place your PS VR2 headset onto the top display stand for organized storage.
- Connect controller to PS5 console with included charging cable: Connect the provided Type-C charging cable from the dock to a 5V/2A power source, such as your PS5 console or a compatible wall adapter.
Image: A visual guide demonstrating the six easy steps for assembling and connecting the PSVR2 charging dock, from inserting the rod to connecting the power cable.
Ṣiṣẹ
The Tokluck PSVR2 Charging Dock is designed for efficient charging and convenient storage.
Gbigba agbara Controllers
- Orisun Agbara: The dock is powered by multiple 5V 2A supply devices, including the PS5 console (via the included Type-C cable), a 5V/2A wall adapter, a USB HUB, or a PC.
- Ngba agbara oofa: Once the Type-C magnetic dongles are inserted into your PS VR2 Sense controllers, simply place them into the charging slots. The strong magnets will automatically align for a secure connection, making plugging in effortless. The charging process will automatically stop once controllers are fully charged.
- Gbigba agbara yiyara: The dock can fully charge dual controllers in approximately 1.5 to 2 hours.
Image: Illustration showing the various power sources (PS5 console, wall adapter, USB HUB, PC) that can power the charging dock, highlighting the 5V/2A requirement and the 1.5-2 hour charging time.
Aworan: A sunmọ-soke view demonstrating the magnetic charging process, showing the Type-C magnetic connector being inserted into the controller and the controller then placed into the charging slot for automatic alignment.
LED Ifi
- Imọlẹ Buluu Iduroṣinṣin: Indicates that the controllers are fully charged or the dock is in standby mode.
- Breathing Orange Light: Indicates that the controllers are currently charging.
VR Headset Display Stand
The top section of the dock serves as a detachable display stand for your PS VR2 headset. This allows you to keep all your PS VR2 accessories in one organized location, reducing clutter on your desk.
Itoju
To ensure the longevity and optimal performance of your Tokluck PSVR2 Charging Dock, please follow these maintenance guidelines:
- Ninu: Use a soft, dry cloth to wipe down the surface of the charging dock. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Yago fun Olomi: Keep the charging dock away from water and other liquids. Do not immerse the device in water.
- Ibi ipamọ: Tí o kò bá lò ó fún ìgbà pípẹ́, tọ́jú ibi tí ó tutù tí ó sì gbẹ, kí oòrùn má baà mú kí ó tàn tààrà tàbí ooru tó le gan-an.
- Mimu: When moving the charging station, always hold the base rather than the middle rod to prevent accidental detachment or damage.
Laasigbotitusita
If you encounter issues with your Tokluck PSVR2 Charging Dock, please refer to the following common solutions:
- Controllers not charging:
- Ensure the Type-C magnetic dongles are securely inserted into the controllers.
- Verify that the charging cable is firmly connected to both the dock and the power source (PS5 console or wall adapter).
- Check if the power source is active and providing 5V/2A output. Try a different USB port or wall adapter if available.
- Ensure the controllers are correctly seated in the charging slots and the LED indicators are showing a breathing orange light.
- LED indicators not lighting up:
- Confirm the dock is receiving power. Check all cable connections.
- Try connecting the dock to a different power source.
- Dock feels unstable:
- Ensure the supporting rod is fully inserted into the base and the top tray is securely attached.
- Place the dock on a flat, stable surface.
Ti iṣoro naa ba wa lẹhin igbiyanju awọn igbesẹ wọnyi, jọwọ kan si atilẹyin alabara.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Tokluck |
| Asopọmọra Technology | USB |
| Asopọmọra Iru | USB Iru C |
| Awọn ẹrọ ibaramu | Game Consoles (Specifically PS VR2 Sense Controllers) |
| Awọn irinše to wa | 1 x PSVR 2 Charging Station, 1 x Supporting Rod, 1 x Type-C Charging Cable, 1 x VR2 Headset Holder, 2 x Type-C Magnetic Connector |
| Pataki Ẹya | Magnetic Charging, Detachable Headset Stand |
| Àwọ̀ | Dudu |
| Iṣagbewọle Voltage | 5 Volts |
| Iṣagbesori Iru | Tabletop Oke |
| Ampigba | 2 Amps |
| Akoko gbigba agbara | Approx. 1.5-2 hours for dual controllers |
Image: A comparison showing the Tokluck charging dock is specifically designed for PS VR2 and not compatible with Oculus Quest 2, along with key dimensions of the assembled unit.
Atilẹyin ọja ati Support
For warranty information or technical support, please refer to the product packaging or contact Tokluck customer service directly through their official website or the retailer where the product was purchased. Please have your product model number and purchase date available when contacting support.
