Ọrọ Iṣaaju
The CDN Digital Probe Cooking, Cooling Thermometer, Smoker Oven Grill Candy Deep Frying, Multifunctional Thermometer/Timer/Clock (Model DTTC-W) is a versatile tool designed to assist in precise temperature monitoring for various cooking and cooling applications. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Alaye Aabo
- Always handle the stainless steel probe with care as it can become very hot during use. Use oven mitts or heat-resistant gloves when removing the probe from hot food or ovens.
- Do not immerse the main thermometer unit in water or any other liquid. The unit is not waterproof. Clean only the probe and cable.
- Ensure the probe cable is not pinched or damaged by oven doors or grill grates, as this can affect accuracy and damage the cable.
- Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde.
- Ma ṣe lo thermometer ni adiro microwave.
- Only use the specified battery type (1 AAA).
Awọn eroja
Your CDN DTTC-W package includes the following components:
- Digital Thermometer/Timer/Clock Unit
- Stainless Steel Probe with High-Heat Sensor Cable
- Ikoko Agekuru
- 1 Batiri AAA (pẹlu)
Image: The CDN Digital Probe Thermometer DTTC-W unit, showing the main display, control buttons, the stainless steel probe, and the pot clip.
Ṣeto
- Fifi sori batiri:
Locate the battery compartment on the back of the main unit. Open the compartment cover and insert one AAA battery, ensuring correct polarity (+/-). Close the cover securely.
- Asopọ Iwadi:
Insert the plug of the stainless steel probe cable into the jack located on the side of the main unit. Ensure it is fully inserted for proper connection.
Aworan: A sunmọ-soke view of the stainless steel probe and its high-heat sensor cable, ready for connection to the main unit.
- Gbigbe Ẹka:
The DTTC-W offers two mounting options:
- Oofa Pada: The unit has magnetic strips on its back, allowing it to be securely attached to metal surfaces like a refrigerator door or oven exterior.
- Fold-out Stand: A hinge allows the unit to sit upright on a countertop or stovetop for easy viewing.
Image: The thermometer unit attached to an oven door via its magnetic back, demonstrating the magnetic mounting option.
Image: The thermometer unit standing upright on a countertop using its integrated fold-out stand.
Awọn ilana Iṣiṣẹ
The DTTC-W features a clear LED screen displaying time, current food temperature, and set temperature. Buttons are clearly marked for ease of use.
Awọn ọna Iṣiṣẹ:
Tẹ awọn MODE button to cycle through the three main modes: Thermometer, Timer, and Clock.
1. Thermometer Mode:
- Iwọn iwọn otutu: Insert the stainless steel probe into the thickest part of the food, avoiding bone or gristle. The current internal temperature will be displayed on the screen.
- Setting Temperature Alert:
- Tẹ awọn AKIYESI button. The set temperature will flash.
- Lo awọn UP ati SILE buttons to adjust the desired target temperature.
- Tẹ AKIYESI lẹẹkansi lati jẹrisi eto.
- When the food reaches the set temperature, an alarm will sound. Press any button to silence the alarm.
- Fahrenheit/Celsius Selection: Use the switch on the back of the unit to toggle between Fahrenheit (°F) and Celsius (°C) temperature scales.
- Using the Pot Clip: For deep frying or candy making, attach the pot clip to the side of your saucepan. Insert the probe through the clip, ensuring the probe tip is submerged in the liquid but not touching the bottom of the pan.
Image: The pot clip securely attached to the rim of a saucepan, holding the probe in place for accurate temperature monitoring during cooking.
2. Ipo Aago:
- Ṣiṣeto Aago Iṣiro:
- Tẹ awọn HR ati MIN buttons to set the desired countdown time.
- Tẹ Bẹrẹ/Duro lati bẹrẹ kika.
- Lati da duro, tẹ Bẹrẹ/Duro lẹẹkansi. Tẹ lẹẹkansi lati bẹrẹ pada.
- Lati ko aago kuro, tẹ CLR.
- An alarm will sound when the timer reaches zero. Press any button to silence.
- Aago Iṣiro-soke:
From Timer mode, ensure the timer is set to 0:00. Press Bẹrẹ/Duro to begin counting up. Press Bẹrẹ/Duro to pause/resume, and CLR lati tun.
3. Clock Mode:
- Ṣiṣeto aago:
- In Clock mode, press and hold the MODE bọtini titi ti wakati awọn nọmba filasi.
- Lo awọn HR ati MIN buttons to set the hour and minute respectively.
- Tẹ MODE lati jẹrisi eto kọọkan.
- The clock displays 12-hour or 24-hour time.
Image: The thermometer probe accurately measuring the internal temperature of a chicken roasting inside an oven.
Image: The thermometer probe inserted into chicken breasts cooking on a grill, demonstrating its use for outdoor cooking.
Itoju
- Ninu:
The stainless steel probe and cable can be cleaned with a damp cloth and mild detergent. Rinse thoroughly and dry immediately. The main unit should be wiped clean with a damp cloth only. Do not immerse the main unit in water.
Image: The thermometer unit and probe resting on a wooden cutting board, illustrating the ease of access for cleaning after use.
- Rirọpo Batiri: Replace the AAA battery when the display dims or the unit stops functioning correctly.
- Ibi ipamọ: Store the thermometer in a clean, dry place when not in use. Avoid extreme temperatures or direct sunlight.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si ifihan tabi baibai àpapọ. | Batiri ti ku tabi ti fi sori ẹrọ ti ko tọ. | Rọpo batiri AAA, ki o rii daju pe o tọ polarity. |
| Awọn kika iwọn otutu ti ko pe. | Probe not fully inserted, damaged probe/cable, or probe tip touching bone/pan. | Ensure probe is fully inserted. Check cable for damage. Reposition probe to avoid bone/pan. If issues persist, the probe may need replacement. |
| Itaniji ko dun. | Alarm volume too low (if adjustable, though this model doesn't specify), or alarm setting incorrect. | Verify alarm temperature is set correctly. Ensure the unit is not in a location where the sound is muffled. |
| Unit resets or freezes. | Low battery or internal malfunction. | Rọpo batiri. Ti iṣoro naa ba n tẹsiwaju, kan si atilẹyin alabara. |
Awọn pato
- Iwọn Iwọn: 14 to 392°F / -10 to +200°C
- Ibiti Aago: Up to 24 hours by hr/min
- Gigun Iwadii: 5.5 inches (14.0 cm)
- Gigun Cable Sensọ: 3 ẹsẹ (91.4cm)
- Sensor Cable Heat Resistance: Titi di 600°F/315°C
- Orisun Agbara: 1 x 1.5V AAA IEC LR03 Alkaline Battery (included)
- Iru ifihan: LCD oni -nọmba
- Awọn aṣayan iṣagbesori: Magnetic back, Fold-out stand
- Awọn ohun elo: Stainless Steel probe, Plastic unit casing
- Awọn iwọn ọja: 10.5 x 6 x 1.3 inches; 4 ounces (tó súnmọ́)
Atilẹyin ọja
The CDN Digital Probe Cooking Thermometer (DTTC-W) is covered by a two-year warranty against defects in materials and workmanship from the date of purchase. This warranty does not cover damage resulting from misuse, abuse, accident, or unauthorized alteration or repair. Please retain your proof of purchase for warranty claims.
Atilẹyin
For technical assistance, warranty claims, or general inquiries, please contact CDN Customer Service. Refer to the official CDN webojula fun awọn julọ lọwọlọwọ alaye olubasọrọ.
Webojula: www.cdn-timeandtemp.com
