VSYSTO Motorcycle Dash Cam Tire Pressure Sensors with Wired Remote Control Instruction Manual

1. Ọja Ipariview

This manual provides instructions for the VSYSTO Tire Pressure Sensors and Wired Remote Control, designed as replacement accessories for specific VSYSTO Motorcycle Dash Cam models. These components work together to monitor tire pressure and allow for remote control of your dash cam system.

Image 1: VSYSTO Tire Pressure Sensors and one type of Wired Remote Control.

Image 2: VSYSTO Tire Pressure Sensors and an alternative Wired Remote Control design.

Ohun ti o wa ninu Apoti

• Tire pressure sensors kit

2. Itọsọna fifi sori ẹrọ

Proper installation of the tire pressure sensors is crucial for accurate readings and system functionality. Ensure your VSYSTO dash cam recorder is turned on before beginning the installation process.

Sensor Installation Steps

1. Ensure all accessories are present and complete.
2. Turn on the VSYSTO dash cam recorder.
3. Remove the valve cap from the tire valve.
4. Screw the hexagonal nut onto the valve nozzle first.
5. Install the front and rear tire sensors in sequence. The sensors are typically marked 'F' for front and 'R' for rear.
6. After hand-tightening the tire pressure sensor, use the provided wrench to reverse turn the hexagonal nut to tighten the sensor. This prevents the sensor from falling off during operation.
7. Finally, check for air leakage around the sensor using soapy water. If bubbles appear, re-tighten the sensor.

Image 3: Visual guide for tire pressure sensor installation and battery replacement. Shows sensor dimensions, wrench use, and battery type (CR1225).

3. Awọn ilana Iṣiṣẹ

The VSYSTO Tire Pressure Sensors continuously monitor your motorcycle's tire pressure and transmit data to your compatible VSYSTO dash cam. The wired remote control allows you to interact with your dash cam system without directly touching the main unit.

Monitoring Pressure Pressure

• Once installed and paired with your VSYSTO dash cam, the sensors will automatically begin transmitting real-time tire pressure data.
• Refer to your specific VSYSTO dash cam manual for details on how to view tire pressure readings and configure alerts on the dash cam display.

Wired Remote Control Functionality

The wired remote control provides convenient access to dash cam functions. While specific button functions may vary slightly between remote designs, common operations include:

• Awọn itọka oke/isalẹ: Navigate menus or adjust settings on the dash cam display.
• Bọtini O dara: Confirm selections or activate functions.
• Red Buttons (on some models): Typically used for emergency recording or capturing photos.

Consult your VSYSTO dash cam's user manual for precise instructions on how to use the wired remote control with your specific dash cam model.

4. Itọju

Battery Replacement for Sensors

The tire pressure sensors are powered by replaceable batteries. When a sensor's battery is low, your dash cam system will typically provide an alert. To replace the battery:

1. Use a wrench to unscrew the lid of the sensor.
2. Remove the old battery and replace it with a new CR1225 model battery.
3. After installing the new battery, tighten the cover tightly to ensure a proper seal.

Regular Leakage Check

Periodically check the tire pressure sensors for any air leakage, especially after installation or if you notice inconsistent readings. Apply soapy water around the sensor and the valve stem. The appearance of bubbles indicates a leak that needs to be addressed by re-tightening the sensor or inspecting the valve stem.

5. Laasigbotitusita

This section addresses common issues you might encounter with your VSYSTO Tire Pressure Sensors and Wired Remote Control.

• Ibamu: These accessories are only compatible with VSYSTO products. Ensure you have a compatible VSYSTO dash cam system.
• Rirọpo Sensọ: If one tire pressure sensor is damaged, it is recommended to replace both tire pressure sensors as they are sold as a complete set.
• Iyipada Iṣakoso Latọna jijin: The tire pressure sensors and wired remote control are designed to work together. When installing new tire pressure sensors, it is advised to also replace the wired remote control with the new one provided in the kit.
• Iyọ afẹfẹ: If sensors are leaking air, ensure they are properly tightened using the provided wrench. A soapy water test can help identify the exact location of the leak.
• Awọn kika ti ko tọ: Verify that the sensors are correctly installed on the designated front ('F') and rear ('R') tires. Ensure batteries are fresh and properly inserted.

For further assistance, please refer to the support section or contact VSYSTO customer service.

6. Awọn alaye ọja

7. Atilẹyin ọja ati Support

For specific warranty information regarding your VSYSTO Tire Pressure Sensors and Wired Remote Control, please refer to the documentation included with your original VSYSTO dash cam purchase or contact VSYSTO customer support directly.

Awọn Eto Idaabobo

Extended protection plans may be available for your product. These plans offer additional coverage beyond the standard manufacturer's warranty. Options may include:

• 2-odun Idaabobo Eto
• 3-odun Idaabobo Eto
• Idaabobo pipe (ero oṣooṣu ti o bo ẹtọ ti o kọja ati awọn rira iwaju)

Details on purchasing and activating these plans can typically be found at the point of sale or through the VSYSTO official webojula.

Olubasọrọ Support

If you have purchased a VSYSTO recorder previously and need to ensure compatibility or have specific questions about your product model, please contact the seller directly. Providing your purchased product model will help ensure you receive the correct accessories or support.

Manufacturer: VSYSTO