Goobay 61130 CAT 8.1 RJ45 Connector Instruction Manual

1. Ifihan

Thank you for choosing the Goobay 61130 CAT 8.1 RJ45 Connector. This shielded connector is designed for high-performance network installations, supporting data transfer rates up to 40 Gigabits per second and Power over Ethernet (PoE++) applications. Its tool-free LSA assembly simplifies installation, making it suitable for both solid and stranded round network cables. This manual provides essential information for the proper setup, operation, and maintenance of your connector.

2. Alaye Aabo

• Ka gbogbo awọn itọnisọna ni pẹkipẹki ṣaaju fifi sori ẹrọ ati lo.
• Ensure proper handling to avoid damage to the connector or connected cables.
• Do not expose the connector to extreme temperatures, moisture, or corrosive environments.
• Jeki kuro ni arọwọto awọn ọmọde.
• Only use with compatible CAT 8.1 network cables.

3. Package Awọn akoonu

Package yẹ ki o ni awọn nkan wọnyi:

• Goobay 61130 CAT 8.1 RJ45 Connector
• Fila Idaabobo

4. Eto ati fifi sori

The Goobay 61130 connector features a tool-free LSA assembly for quick and easy installation.

4.1 Cable Compatibility

This connector is suitable for round network cables with conductor models:

• Solid Conductors: AWG 22/1 - 26/1
• Stranded Conductors: AWG 22/7 - 26/7
• Okun Okun: 5.0 - 8.5 milimita

4.2 fifi sori Igbesẹ

1. Ṣetan USB naa: Carefully strip the outer jacket of your CAT 8.1 network cable to expose the twisted pairs. Ensure sufficient length for termination.
2. Arrange Wires: Untwist the wire pairs and arrange them according to the TIA 568A/B color coding scheme, which is typically indicated on the connector itself. The connector is color-coded for TIA 568A/B.
3. Fi awọn Waya sii: Place each individual wire into its corresponding slot in the LSA terminal block.
4. Close the Housing: Close the connector housing by simply pressing it together. This action will simultaneously cut the excess wire ends and establish the connection without the need for special tools.
5. Jẹrisi Asopọmọra: After closing, ensure the connection is secure and the wires are properly seated. A network cable tester can be used to verify continuity and correct wiring.

Nọmba 1: Goobay 61130 CAT 8.1 RJ45 Connector. This image shows the shielded RJ45 connector with its robust metal housing and the black latch mechanism. The "CAT 8" designation is visible on the top surface.

5. Isẹ

Once properly installed on a CAT 8.1 network cable, the Goobay 61130 RJ45 connector enables high-speed data transmission and supports Power over Ethernet (PoE) functionalities.

• Data Iyara giga: The connector supports 25GBase-T and 40GBase-T Ethernet standards, with a frequency of up to 2 GHz, ensuring optimal performance for demanding network applications. It is backward compatible with lower CAT standards.
• Agbara lori Ethernet (PoE): It supports PoE++ (4PPoE, Ultra PoE) according to IEEE802.3bt, allowing power to be delivered to compatible devices over the same network cable.
• Iduroṣinṣin ifihan agbara: The 3µm gold-plated contacts and STP (Shielded Twisted Pair) shielding ensure optimal signal transmission and durability, minimizing interference and crosstalk.

6. Itọju

The Goobay 61130 CAT 8.1 RJ45 connector requires minimal maintenance.

• Ninu: If necessary, gently wipe the exterior of the connector with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Ayewo: Periodically inspect the connector for any signs of physical damage or corrosion.
• Ibi ipamọ: Store unused connectors in a dry, dust-free environment.

7. Laasigbotitusita

If you experience issues with your network connection, consider the following:

• Ko si Isopọ Nẹtiwọọki:
  • Ensure the cable is correctly terminated in the connector according to TIA 568A/B standards.
  • Verify that the cable is securely plugged into both the connector and the network device.
  • Test the cable and connector with a network cable tester to check for continuity and correct wiring.
  • Check if the network device (e.g., switch, router) is powered on and functioning correctly.
• Iyara Nẹtiwọọki o lọra:
  • Ensure all components in your network chain (cable, connector, network card, switch) support CAT 8.1 or the desired speed.
  • Check for electromagnetic interference (EMI) if the cable is routed near power lines or other sources of interference. The STP shielding helps, but extreme interference can still affect performance.
  • Verify that the cable length does not exceed the recommended limits for CAT 8.1 (24m permanent link, 30m channel link).
• PoE Not Working:
  • Confirm that both the power sourcing equipment (PSE) and the powered device (PD) support PoE++ (IEEE802.3bt).
  • Ensure the cable is correctly wired for PoE.

8. Imọ ni pato

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the Goobay official webaaye tabi kan si alagbata agbegbe rẹ. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

Olupese: Wentronic
Brand: ibi
Awoṣe: 61130