1. Ọja Ipariview
The Daytech Wireless Caregiver Pager System is designed to provide quick and efficient communication between a patient or elderly individual and their caregiver. This system enhances independence for the user while offering peace of mind to family members and caregivers. It is suitable for use in private households, hospitals, and nursing homes.
Figure 1: Daytech Wireless Caregiver Pager System components, including two plug-in receivers and one watch-style call button.
2. Package Awọn akoonu
- 1 x Wireless Watch Pager
- Àwọn Olùgbà Àfikún 2 x
- 1 x Call Button (with lanyard and double-sided patch)
- 1 x Small Screwdriver (for battery replacement)
- 3 x AAA Batteries (included, for call button)
3. Awọn ilana iṣeto
3.1 Initial Setup and Powering On
- Eto Olugba: Plug the receiver unit into a standard electrical outlet. The receiver will power on automatically.
- Call Button Battery Installation: The call button requires 3 AAA batteries (included). Use the provided small screwdriver to open the battery compartment, insert the batteries, and securely close the compartment.
- Watch Pager: The watch pager comes with a pre-installed battery and is ready for use.
3.2 Modifying Ringtone and Pairing
The system comes pre-paired with standard factory settings. If you wish to change the ringtone or re-pair units, follow these steps:
Figure 2: Steps for ringtone selection and pairing.
- So Olugba wọle: Ensure the receiver is plugged into a power socket.
- Yan Ohun orin ipe: On the receiver, press the 'Forward' or 'Backward' buttons to cycle through the 20 available ringtones until you find your preferred sound.
- Tẹ Ipo Sisopọ: Press and hold the 'Volume Control' button on the receiver until it makes a "ding-dong" sound. This indicates the receiver is in pairing mode.
- Pair Transmitter: While the receiver is in pairing mode, press the call button on the watch pager or the separate call button. The receiver will make another "ding-dong" sound, confirming successful pairing.
3.3 Call Button Installation Options
The call button can be used in various ways for convenience and accessibility:
- Wọ Ni Ọrun: Attach the included lanyard to the call button for easy access.
- Wọ lori Ọwọ: The watch pager is designed to be worn on the wrist.
- Fix on Wall: Use the provided 3M double-sided patch to affix the call button to a wall, such as in a bathroom or by a bedside. The call button unit is splash-proof (IP55 rated).
Figure 3: Versatile placement options for the call button.
4. Awọn ilana Iṣiṣẹ
Using the Daytech Caregiver Pager System is straightforward:
- Bíbẹ̀rẹ̀ Ìpè: When assistance is needed, simply press the large 'SOS' button on the watch pager or the 'CALL' button on the separate call button.
- Receiving an Alert: The paired receiver(s) will sound the selected ringtone and may flash an indicator light, alerting the caregiver.
- Iṣatunṣe Iwọn didun: The receiver has a volume control button to adjust the alert sound level. There are 5 volume levels available, up to 110 dB.
Figure 4: Key features of the watch pager.
The system offers a working range of up to 100ft/30m indoors, allowing caregivers freedom of movement within the home.
Figure 5: Wireless range illustration.
5. Itọju
5.1 Battery Replacement for Call Button
The call button is powered by 3 AAA batteries. When the signal weakens or the button stops responding, it's time to replace the batteries. Use the provided small screwdriver to open the back cover, replace the old batteries with new ones, and secure the cover.
Video 1: Instructions on how to attach the lanyard and replace the battery in the call button.
5.2 Itọju Gbogbogbo
- Jeki awọn ẹrọ naa di mimọ nipa fifẹ wọn pẹlu asọ ti o gbẹ.
- Avoid exposing the watch pager and call button to excessive moisture or immersion in water. While the call button is splash-proof, it is not designed for submersion.
- Tọ́jú ètò náà sí ibi tí ó tutù tí ó sì gbẹ nígbà tí a kò bá lò ó fún ìgbà pípẹ́.
6. Laasigbotitusita
- No Alert from Receiver:
- Rii daju pe olugba ti wa ni edidi daradara sinu iṣan itanna ti n ṣiṣẹ.
- Check if the call button or watch pager battery needs replacement.
- Verify that the call button/watch pager is paired with the receiver (refer to Section 3.2).
- Ensure the devices are within the operational range (up to 100ft/30m). Walls and other obstacles can reduce range.
- Weak Signal or Intermittent Alerts:
- Relocate the receiver to a more central location or closer to the user.
- Ṣàyẹ̀wò bóyá àwọn ẹ̀rọ itanna míràn lè dí ọ lọ́wọ́.
- Replace batteries in the call button/watch pager.
- Ringtone Not Changing:
- Follow the ringtone selection steps carefully (Section 3.2).
- Ensure you are pressing the correct 'Forward' or 'Backward' buttons.
7. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Daytech |
| Nọmba awoṣe | lc01 1-2w us |
| Ibiti o pọju | 800 Feet (Note: Practical indoor range is typically up to 100ft/30m due to obstacles) |
| Ariwo Ipele | Titi di 110dB |
| Ọna Iṣakoso | Fọwọkan |
| Iṣagbesori Iru | Wall Mount (for call button) |
| Orisun Agbara (Olugba) | Plug-in (260 Volts) |
| Power Source (Call Button) | Awọn batiri AAA 3 (pẹlu) |
| Ọja Mefa | 3.15 x 1.97 x 4.72 inches |
| Iwọn Nkan | 9.1 iwon |
8. Atilẹyin ọja ati Support
Daytech provides a full year's warranty and a money-back guarantee for this product. Round-the-clock customer service is available to assist with any queries or issues you may encounter.
For further assistance, please refer to the official Daytech webaaye tabi kan si atilẹyin alabara wọn taara.
