1. Ifihan
This manual provides instructions for the installation, operation, and maintenance of the MokerLink 4 Port Gigabit PoE Extender, Model 4 Port 1000M. This device is designed to extend Power over Ethernet (PoE) and data transmission distances, providing a flexible solution for network deployment.
2. Ọja Ipariview
2.1 Key Awọn ẹya ara ẹrọ
- 4 Gigabit PoE Ports: Includes 1 PoE In port and 3 PoE Out ports, supporting 10/100/1000Mbps speeds. PoE transmission distance up to 100 meters per segment.
- IEEE 802.3 af/at Compliance: All ports support standard PoE, with a maximum input of 30W and a maximum output of 24W, averaging 8W per port. PoE voltage range is 44-57 Vdc. PoE pin configuration: Input 1/2 (+), 3/6 (-), 4/5(+), 7/8(-); Output 1/2 (+), 3/6 (-).
- Unmanaged Plug & Play: Features automatic power detection for connected devices, requiring no configuration. Simply connect Ethernet cables.
- Fifi sori Rọrun: Powered by the PoE network, eliminating the need for an additional power adapter. Supports both wall mount and DIN rail mount options for versatile placement.
- Cascading Capability: Supports up to 3 levels of cascading, allowing for extended PoE coverage for devices such as PoE access points, IP cameras, and VoIP phones.
2.2 Package Awọn akoonu
- MokerLink 4 Port Gigabit PoE Extender (Model 4 Port 1000M)
2.3 ọja aworan atọka
olusin 1: Iwaju view of the MokerLink 4 Port Gigabit PoE Extender, showing the four Ethernet ports and the ON/OFF switch.
Figure 2: Diagram illustrating the 1 PoE In and 3 PoE Out port configuration, connecting to IP cameras and a PoE switch.
3. Awọn pato
| Iwa | Iye |
|---|---|
| Nọmba awoṣe | 4 Port 1000M |
| Nọmba ti Ports | 4 (1 PoE In, 3 PoE Out) |
| Data Gbigbe Oṣuwọn | 10/100/1000 Mbps (Gigabit) |
| Poe Standard | IEEE 802.3 af / ni |
| Agbara titẹ sii (O pọju) | 30W |
| Agbara Ijade (Max) | 24W (Average 8W per port) |
| Poe Voltage | 44-57 Vdc |
| Iṣẹ́ Pínì PoE (Ìtẹ̀wọlé) | 1/2 (+), 3/6 (-), 4/5(+), 7/8(-) |
| Iṣẹ́ Pínì PoE (Ìjáde) | 1/2 (+), 3/6 (-) |
| Ohun elo ọran | Ṣiṣu |
| Awọn iwọn | 82mm (L) x 52mm (W) x 23mm (H) |
| Iwọn Nkan | 0.08 kilogram (2.82 iwon) |
| Awọn iwọn otutu ti nṣiṣẹ | Titi di iwọn 55 Celsius |
| Iṣagbesori Aw | Wall Mount, DIN Rail Mount |
4. Eto ati fifi sori
4.1 Ipilẹ Asopọmọra
- Ensure your upstream network device (e.g., PoE switch or PoE injector) provides IEEE 802.3af/at compliant PoE power.
- Connect an Ethernet cable from your PoE source to the Poe IN port on the MokerLink Extender. This port will supply both power and data to the extender.
- Connect your PoE-powered devices (e.g., IP cameras, wireless access points, VoIP phones) to the PoE OUT 1, 2, or 3 ports using standard Ethernet cables.
- The extender is plug-and-play and will automatically detect and power the connected devices. No software configuration is required.
Figure 3: Illustration of PoE+ IEEE 802.3af/at support, showing the extender powering an IP camera, wireless AP, and IP phone.
Figure 4: The extender with Ethernet cables connected, demonstrating its plug-and-play functionality.
4.2 iṣagbesori Aw
The MokerLink PoE Extender offers flexible mounting options:
- Odi Odi: Use screws to secure the extender to a wall or flat surface.
- DIN Rail Oke: Attach the extender to a standard DIN rail for industrial or organized installations.
Figure 5: Depiction of the extender mounted on a DIN rail (left) and secured to a wall (right).
5. Awọn ilana Iṣiṣẹ
The MokerLink PoE Extender is designed for simple operation:
- Once connected as described in Section 4.1, the device will automatically power on and begin functioning.
- The extender will automatically detect if a connected device requires PoE power and supply it accordingly.
- Data transmission will occur at the highest supported speed (10/100/1000Mbps) negotiated with the connected devices.
6. Awọn ẹya ara ẹrọ ti ilọsiwaju
6.1 Ṣíṣe àfikún ọ̀pọ̀lọpọ̀ àwọn afikún
The MokerLink PoE Extender supports cascading up to 3 levels, allowing you to extend the reach of your PoE network significantly. Each extender can extend the PoE and data signal by an additional 100 meters.
Figure 6: Diagram showing three MokerLink PoE Extenders cascaded to extend network reach up to 300 meters for IP cameras.
6.2 Port-based VLAN Feature
The extender includes a DIP switch for enabling a port-based VLAN feature. When activated, ports 2-4 can be isolated from each other. This helps prevent broadcast storms from IP cameras or other devices on one port from affecting devices on other ports, enhancing network stability.
Figure 7: Illustration of the port-based VLAN feature, showing how ports 2-4 can be isolated using the DIP switch.
7. Laasigbotitusita
- Ko si Agbara si Awọn ẹrọ ti a Sopọ:
- Ensure the PoE IN port is connected to an active IEEE 802.3af/at compliant PoE source.
- Verify the PoE source is providing sufficient power for all connected devices. The extender has a maximum output of 24W.
- Check all Ethernet cable connections for proper seating and integrity.
- Ko si asopọ Dátà:
- Confirm that the upstream network connection is active and functioning.
- Ensure Ethernet cables are correctly connected to the PoE IN and PoE OUT ports.
- Test with different Ethernet cables to rule out cable faults.
- Verify the connected device is operational and its network settings are correct.
- Iyara Nẹtiwọọki o lọra:
- Ensure all connected devices and cables support Gigabit Ethernet (1000Mbps) for optimal performance.
- Check for excessive cable lengths. While the extender extends range, total cable length should still adhere to Ethernet standards for reliable performance.
8. Alaye Aabo
- Ma ṣe fi ẹrọ naa han si omi tabi ọriniinitutu pupọ.
- Ma ṣe ṣi ẹrọ naa casing. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
- Rii daju pe fentilesonu to dara lati ṣe idiwọ igbona.
- Use only with IEEE 802.3af/at compliant PoE sources.
9. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the MokerLink official webaaye tabi kan si alatunta ti a fun ni aṣẹ. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.
