NICREW C10 Plants LED Aquarium Light Instruction Manual

Ọja Pariview

The NICREW C10 Plants LED Aquarium Light is designed to provide optimal lighting for aquatic plants, featuring a full spectrum, adjustable brightness, and a programmable day/night cycle. Its robust construction ensures durability and efficient heat management.

Image: NICREW C10 Plants LED Aquarium Light, designed to maximize plant growth potential.

Key Awọn ẹya ara ẹrọ

• Excellent Spectrum: Combines 6500K white, 460nm blue, and TRUE 665nm deep red LEDs for efficient photosynthesis.
• Imọlẹ Adijositabulu: Individual dimming from 0% to 100% for CH1 (white and red LEDs) and CH2 (blue LEDs), offering 10,000 color temperature combinations.
• Day+Night Cycle: Simulates natural day and night cycles with gradual ramp-up and dim-down features for sunrise and sunset.
• Nature-Centered Design: Gentle light transitions prevent startling fish. Light is completely off at night for fish rest.
• Water-Resistant and Effective Heat Management: Aluminum alloy body with heat sinks for durability and cooling.

Eto ati fifi sori

Follow these steps for initial setup and installation of your NICREW C10 Plants LED Aquarium Light.

Iṣagbesori Imọlẹ

The light features adjustable mounting arms to fit various aquarium sizes. Simply extend the brackets to rest securely on the edges of your rimless tank.

Image: The NICREW C10 light with adjustable brackets, showing how it fits various aquarium sizes and its dimensions.

Eto Oluṣakoso

The C10 light includes an inline digital controller for easy programming. Refer to the video below for a detailed guide on setting up the controller.

First Time Setup (Reset to Factory Settings)

1. Tẹ mọlẹ Eto bọtini ati ki o Agbara button simultaneously for 3 seconds to reset the unit to default factory settings.

Ṣeto Akoko lọwọlọwọ

1. Tẹ mọlẹ Eto button for 3 seconds. The current time will begin to flash.
2. Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn wakati.
3. Tẹ awọn Eto button to advance to the minutes setting.
4. Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn iṣẹju.
5. Tẹ awọn Eto button again to set the time. This will advance you to the sunrise time setting.

Set the Timer (Sunrise, Sunset, Sleep)

After setting the current time, the LCD display will flash the sunrise time. Follow these steps to set the timer and color spectrum:

1. Lo awọn + ati - buttons to set the desired sunrise hour. Press Eto to save and advance to minutes. Repeat for minutes.
2. Tẹ awọn Eto button to move to the sunset time setting. Use + ati - to set hours and minutes.
3. Tẹ awọn Eto button to move to the sleep time setting. Use + ati - to set hours and minutes.
4. Imọran: If you want to use only the day cycle and not the night cycle, press the Agbara button when the sleep time is flashing. Sleep time will change to OFF, and the night cycle will be disabled. The lights will begin to dim at sunset time and turn off completely after 15 minutes.

Set the Color Spectrum (Daylight and Moonlight)

After setting the sleep time, the LCD display will flash the daylight spectrum settings.

1. Lo awọn + ati - buttons to set the brightness of the white and red LEDs (CH1).
2. Tẹ awọn Eto button to advance to the brightness of blue LEDs (CH2) setting.
3. Lo awọn + ati - buttons to set the brightness of the blue LEDs.
4. Tẹ awọn Eto button. The moonlight color spectrum will be set, and the setup is complete.

Aworan: Isunmọ view of the NICREW C10 controller, showing its clear display and intuitive buttons for easy programming.

Ṣiṣẹ Imọlẹ naa

Once programmed, the light will operate automatically according to your settings. You can also manually control the light or adjust brightness as needed.

Manual On/Off and Mode Cycling

If at any time you wish to turn your light on or off manually, simply press the Agbara bọtini. Tẹ awọn Agbara button again to cycle through different modes (e.g., full spectrum, blue only, off).

Siṣàtúnṣe Imọlẹ

When the light is on, you can adjust the brightness of the white/red LEDs (CH1) and blue LEDs (CH2) individually using the + ati - buttons. This allows for fine-tuning the light intensity and color temperature to suit your aquarium's needs.

Image: The controller display illustrating the individual dimming controls for Channel W (White & Red LEDs) and Channel B (Blue LEDs), allowing for precise brightness adjustments from 0% to 100%.

Image: A split aquarium view demonstrating the difference between vibrant daylight illumination and natural lunar-simulated moonlight, highlighting the light's versatile modes.

Itoju

Proper maintenance ensures the longevity and optimal performance of your aquarium light and the health of your aquatic environment.

Light Unit Care

• The light is constructed from aluminum alloy with heat sinks for efficient heat dissipation. This design helps keep the LEDs cool and extends their lifespan.
• The unit is water-resistant, designed to withstand daily splashes and humidity. However, avoid submerging the unit.
• Regularly wipe the light surface with a soft, damp cloth to remove dust and water spots, ensuring maximum light output.

Ewe Iṣakoso

Effective algae control is crucial for a healthy aquarium. The following practices are recommended:

• Proper Lighting Period: Limit aquarium lighting to 8-10 hours per day. Excessive light can promote algae growth.
• Awọn iyipada omi deede: Perform water changes of about 15-20% every other week to reduce nutrient buildup.
• Avoid Overfeeding the Fish: Observe your fish's food consumption and adjust meal sizes as needed to prevent excess food from decaying and contributing to algae.
• Choose the Location Wisely: Keep your aquarium away from direct sunlight, which can significantly increase algae growth.

Image: Visual guide offering tips on how to effectively control algae blooming in an aquarium, including proper lighting, water changes, feeding, and placement.

Laasigbotitusita

If you encounter issues with your NICREW C10 Plants LED Aquarium Light, try the following steps:

• Imọlẹ Ko Tii: Check all power connections. Ensure the adapter is securely plugged into both the light and the power outlet.
• Incorrect Timing/Brightness: Refer to the 'Setup and Installation' section to re-program the controller. You can also perform a factory reset as described in the 'First Time Setup' section.
• Awọn imọlẹ didan: Ensure the power supply is stable. If flickering persists, try resetting the unit.
• Awọn Iṣoro Ifihan Oluṣakoso: If the display is blank or unresponsive, check connections. A factory reset may resolve minor software glitches.

For persistent issues, please contact NICREW customer support.

Awọn pato

Atilẹyin ọja

This NICREW C10 Plants LED Aquarium Light comes with a 1-odun olupese ká atilẹyin ọja. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Atilẹyin

For further assistance, technical support, or warranty inquiries, please visit the official NICREW webojula tabi kan si wọn onibara iṣẹ Eka.