Ọrọ Iṣaaju
Thank you for choosing the Summerset 15-Inch UL Outdoor Rated Ice Maker (Model SSIM-15). This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ice maker. Please read this manual thoroughly before installation and use, and retain it for future reference.
This durable, outdoor-rated ice maker is constructed of #304 stainless steel with front venting, making it suitable for built-in kitchen islands or freestanding applications. It is designed to produce up to 50 lbs of ice daily and features an automatic shutoff when its 25 lb capacity ice bin is full.
Alaye Aabo pataki
Nigbagbogbo tẹle awọn iṣọra aabo ipilẹ nigba lilo awọn ohun elo itanna lati dinku eewu ina, mọnamọna, tabi ipalara.
- Ka gbogbo awọn ilana ṣaaju lilo ohun elo naa.
- Sopọ si aaye ti o ni ipilẹ daradara nikan.
- Ma ṣe ṣiṣẹ ti okun agbara ba bajẹ.
- Jeki awọn šiši fentilesonu kuro ninu awọn idena.
- Do not touch the evaporator when operating.
- Ensure proper water supply and drainage connections.
- Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan (pẹlu awọn ọmọde) pẹlu idinku ti ara, imọlara tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn.
Ọja Pariview
The Summerset SSIM-15 Ice Maker is designed for reliable outdoor ice production. Familiarize yourself with its components:

olusin 1: Iwaju View of the Ice Maker. This image shows the sleek stainless steel exterior of the Summerset SSIM-15 ice maker, featuring a full-length door and a front-venting grille at the bottom for efficient heat dissipation.

olusin 2: inu ilohunsoke View pẹ̀lú Ìlẹ̀kùn Ṣíṣí. This image displays the interior of the ice maker with the door ajar, revealing the ice production mechanism at the top and the removable ice storage bin below. A warning label is visible on the right side.

Àwòrán 3: Àkójọ Ìṣàkóso. A alaye view of the ice maker's control panel, featuring indicator lights for "ICE HARVEST" and "BIN FULL," along with four circular buttons labeled "ON/OFF," "CLEAN," "ADJUST," and "MODE."

Figure 4: Door Handle. This close-up image highlights the sleek, cylindrical stainless steel handle attached vertically to the ice maker's door, designed for easy opening and closing.
Eto ati fifi sori
Awọn ibeere ipo:
- Place the unit on a flat, level surface capable of supporting its weight (86 lbs).
- Ensure adequate ventilation around the unit, especially the front grille.
- Yago fun orun taara tabi awọn orisun ooru.
- This unit is UL Outdoor Rated, suitable for outdoor environments.
Asopọmọra itanna:
- Connect to a dedicated 120 Volt, 60 Hz, 15 Amp ilẹ itanna iṣan.
- Ma ṣe lo awọn okun itẹsiwaju tabi awọn pilogi ohun ti nmu badọgba.
Isopọ Ipese Omi:
- Connect the included water supply hose to a potable water source with a pressure between 20-80 PSI.
- Rii daju pe gbogbo awọn asopọ wa ni aabo ati laisi jijo.
Sisan omi:
- This unit features a gravity drain. Ensure the drain hose is routed to a floor drain or suitable receptacle lower than the unit's drain outlet to allow for proper water removal.
Awọn ilana Iṣiṣẹ
Ibẹrẹ Ibẹrẹ:
- After installation, plug in the unit.
- Press the "ON/OFF" button on the control panel to turn the unit on. The "ICE HARVEST" indicator light may illuminate.
- Allow several hours for the first batch of ice to be produced. Discard the first few batches of ice to ensure cleanliness.
Isejade yinyin:
- The ice maker will automatically produce ice until the storage bin reaches its 25 lb capacity.
- The "BIN FULL" indicator light will illuminate when the bin is full, and ice production will pause.
- Once ice is removed, production will resume automatically.
Control Panel Functions (Refer to Figure 3):
- TAN/PA: Ṣe agbara ẹrọ naa tan tabi pa.
- MỌ: Initiates the cleaning cycle (see Maintenance section).
- ṢAtunṣe: Used to modify ice thickness or cycle time (refer to full manual for detailed adjustment procedures).
- Ipo: Switches between different operating modes if available (e.g., ice production, standby).
Itọju ati Cleaning
Ninu igbagbogbo:
- Òde: Clean the stainless steel exterior with a soft cloth and mild detergent. Do not use abrasive cleaners.
- Ice Bin: Regularly remove and clean the ice storage bin with warm, soapy water. Rinse thoroughly.
- Air Filter/Ventilation: Periodically clean the front grille and ensure air circulation is not obstructed.
Internal Cleaning Cycle:
It is recommended to run an internal cleaning cycle every 3-6 months, or more frequently depending on water quality and usage.
- Sofo awọn yinyin bin.
- Add a recommended ice maker cleaning solution (e.g., citric acid-based cleaner) to the water reservoir as per cleaner instructions.
- Press the "CLEAN" button on the control panel to start the cycle.
- Once the cycle is complete, drain the cleaning solution and rinse the system by running a few cycles with fresh water, discarding the ice produced during rinsing.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ko ni tan-an. | No power supply; tripped breaker. | Ṣayẹwo asopọ okun agbara; atunto Circuit fifọ. |
| Ko si iṣelọpọ yinyin. | No water supply; water valve closed; bin full sensor activated. | Ensure water supply is connected and valve is open; check for obstructions in water line; empty ice bin. |
| Ice production is slow or ice is thin. | High ambient temperature; poor ventilation; dirty condenser. | Ensure proper ventilation; clean condenser coils; adjust ice thickness setting if available. |
| Omi n jo. | Loose water connections; clogged drain. | Tighten all water supply and drain connections; clear any drain obstructions. |
Fun awọn ọran ti a ko ṣe akojọ si nibi, jọwọ kan si atilẹyin alabara.
Awọn pato
- Awoṣe: SSIM-15
- Brand: Summerset Yiyan
- Ijade Iyinyin lojoojumọ: 50 lbs
- Agbara Ipamọ Ice: 25 lbs
- Voltage: 120 Volts
- Firiji: R134a
- Ohun elo: # 304 Irin alagbara
- Awọn iwọn Ọja (H x W x D): 33.15 x 14.57 x 23.35 inches
- Ìwọ̀n Nkan: 86 lbs
- Orisi Sisan: Imugbẹ Walẹ
- Iṣakoso iwọn otutu: Not Necessary (Automatic)
Atilẹyin ọja ati Onibara Support
For warranty information, please refer to the warranty card included with your product or visit the official Summerset Grills webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
If you require technical assistance, parts, or have questions regarding your Summerset Ice Maker, please contact Summerset Grills customer support. Contact details can typically be found on the manufacturer's webaaye tabi ninu apoti ọja rẹ.
Awọn orisun Ayelujara: Visit the Summerset Grills Store on Amazon





