Ọrọ Iṣaaju
The Baseus C02 Magsafe Car Mount is a magnetic phone holder designed for secure and convenient smartphone placement in your vehicle. Featuring a bendable memory titanium alloy, it offers versatile installation options on dashboards and windshields. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Figure 1: Baseus Magsafe Car Mount with an iPhone securely attached.
Eto ati fifi sori
Proper installation is crucial for the stability and performance of your Baseus C02 Car Mount. Follow these steps carefully:
- Yan Ibi kan: Select a flat, clean surface on your dashboard, center console, or behind the steering wheel. The memory titanium alloy allows for flexibility to conform to various contours.
- Ṣetan Ilẹ: Thoroughly wipe the chosen surface with an alcohol pad to remove any dust, grease, or residue. Ensure the surface is completely dry before proceeding.
- Apply the 3M Tape: Peel off the protective film from the 3M adhesive tape on the Velcro base. Carefully position and firmly press the Velcro base onto the cleaned surface. Apply consistent pressure for at least 30 seconds.
- Allow for Adhesion: For optimal adhesive performance and maximum bond strength, allow the 3M tape to cure for at least 2 hours, preferably 24 hours, before attaching the car mount. This allows the adhesive to fully bond with the surface.
- So Oke: Once the adhesive has cured, stick the hook-and-loop fastener on the Baseus C02 holder to the installed Velcro base.
- Ṣatunṣe Igun: Bend the titanium alloy arm of the mount to your desired viewing angle. The flexible design allows for precise positioning.
- Fun Awọn foonu ti kii-Magsafe: If you are using a non-Magsafe iPhone or an Android model, apply the included metal ring sticker to the back of your phone or phone case. This will enable magnetic attraction with the car mount.
Figure 2: Super-Easy Installation steps for the Baseus C02 Car Mount.
Figure 3: Secure and tight placement is achieved with the non-marking 3M tape.
Awọn ilana Iṣiṣẹ
Using your Baseus C02 Car Mount is simple and intuitive:
- Nfi foonu rẹ pọ: Simply bring your Magsafe-compatible iPhone (12, 13, 14, 15 series) or a phone with the applied metal ring close to the magnetic head of the mount. The strong magnets will securely snap your phone into place.
- Títúnṣe Viewigun Angle: The mount features 360° adjustability. You can easily rotate your phone to any desired angle, whether landscape or portrait mode, for optimal viewing while driving. This can be done with one hand, minimizing distraction.
- Yọ Foonu Rẹ kuro: To remove your phone, gently pull it away from the magnetic head. For phones with the metal ring, it is recommended to pull the phone off at a slight angle to prevent the ring from detaching from the phone.
Figure 4: The mount allows for 360° rotation for any viewigun igun.
Video 1: Demonstration of the Baseus C02 Car Mount's features, including installation, magnetic attachment, and stability during driving.
Itoju
To ensure the longevity and optimal performance of your Baseus C02 Car Mount, follow these simple maintenance guidelines:
- Ninu: Regularly wipe the surface of the mount with a soft, dry cloth to remove dust and fingerprints. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Itọju alemora: If you need to re-position the mount, ensure the new surface is clean and dry. While the 3M tape is strong, repeated removal and re-application may reduce its effectiveness. Consider using new 3M adhesive if the original loses its stickiness.
- Ilẹ oofa: Keep the magnetic surface clean and free of metallic debris to ensure a strong and consistent magnetic connection with your phone.
- Ifihan iwọn otutu: Avoid prolonged exposure to extreme temperatures, both hot and cold, as this can affect the adhesive and the material integrity of the mount.
Laasigbotitusita
If you encounter any issues with your Baseus C02 Car Mount, refer to the following common problems and their solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Mount does not stick securely to the dashboard. | Surface was not clean or dry; insufficient curing time for 3M tape; surface texture is unsuitable. | Ensure the surface is thoroughly cleaned with alcohol and completely dry. Allow the 3M tape to cure for at least 2 hours, ideally 24 hours, before use. If the issue persists, consider using a stronger aftermarket 3M adhesive or selecting a smoother mounting surface. |
| Phone wobbles or falls off easily. | Improper installation; weak magnetic connection; phone not Magsafe-compatible or metal ring improperly placed. | Verify that the mount is securely attached to the dashboard as per installation instructions. Ensure your phone is Magsafe-compatible or that the metal ring is correctly and firmly applied to your non-Magsafe phone/case. Keep the magnetic surface clean. |
| Metal ring detaches from the phone when removing. | Phone pulled directly off the mount; weak adhesive on the metal ring. | When removing your phone, pull it away from the magnetic head at a slight angle rather than straight off. Ensure the metal ring is applied to a clean, smooth surface on your phone or case. |
Awọn pato
- Awọn iwọn ọja: 8.34 x 2.36 x 0.59 inches
- Ìwọ̀n Nkan: 0.141 iwon
- Nọmba Awoṣe Nkan: C02
- Àwọ̀: Dudu
- Olupese: Baseus
- Awọn ẹrọ ibaramu: Awọn fonutologbolori
- Awọn awoṣe Foonu ibaramu: iPhone 15, iPhone 15 Pro, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 mini, Official Magsafe Case. All other phones with provided metal ring attached.
- Iru fifi sori: Dasibodu
- Awọn ẹya pataki: Simple and stylish appearance, upgrading car interiors, Fit for All Car Types, flexible and bendable to fit for different installation scenarios, Fit for All Phone Models (provides metal sticker for non-Magsafe phones), Highest Magnetic Attraction (won't drop off for any kinds of roads).
Atilẹyin ọja ati Support
Baseus products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your product or visit the official Baseus website. You may also contact Baseus customer service directly for assistance with any product-related inquiries.
Ile itaja osise Baseus: Visit Store on Amazon
