BS ONE 1000 Amp Peak Current Car Jump Starter

Ọrọ Iṣaaju

Thank you for choosing the BS ONE 1000 Amp Peak Current Car Jump Starter. This versatile device is designed to provide reliable power for various automotive and outdoor needs. It functions as a powerful jump starter for 12V lead-acid batteries, a 260 PSI air compressor for tire inflation, a portable power station with USB and DC outputs, and an integrated LED light for illumination.

This manual provides detailed instructions on the safe and effective operation, maintenance, and troubleshooting of your BS ONE Jump Starter. Please read it thoroughly before first use and keep it for future reference.

Image: The BS ONE 1000 Amp Peak Current Car Jump Starter, showcasing its main unit, jumper cables, air hose, and various accessories including valve connectors, a 12V DC charging cord, an AC home charger, and a safety hammer.

Alaye Aabo

Always observe the following safety precautions to prevent injury or damage to the unit and vehicle:

• Ensure the jump starter is fully charged before use, especially for jump-starting.
• Do not connect the positive (+) and negative (-) clamps together. This can cause sparks and damage the unit.
• Wear eye protection and gloves when working with car batteries.
• Keep the unit away from flammable materials, moisture, and extreme temperatures outside its operating range (-4°F to 140°F).
• Maṣe gbiyanju lati fo-bẹrẹ batiri tio tutunini.
• If the unit shows signs of damage, do not use it. Contact customer support.
• The unit incorporates multiple safety protections including short-circuit, over-temperature, reverse connection, over-current, overcharge, over-voltage, and magnetic field protection. However, always follow instructions carefully.

Ọja Pariview

Familiarize yourself with the components and controls of your BS ONE Jump Starter:

Image: Detailed diagram illustrating the various parts of the BS ONE Jump Starter, including DC sockets, charging jack, USB/Worklight switch, battery status button, charging indicator, USB power port, pressure gauge, air compressor switch, air compressor hose, air vent, negative jumper cable, and positive jumper cable. Also shown are the three valve connectors, 12V DC charging cord, and AC home charger.

Awọn eroja pataki:

• Àwọn ihò ìsopọ̀ DC 12V: Two outlets for powering 12V devices.
• Gbigba agbara Jack: Input for charging the unit.
• USB/Worklight Switch: Activates the USB output and LED worklight.
• Bọtini Ipo Batiri: Ó ń ṣàyẹ̀wò ipele gbigba agbara batiri inu.
• Atọka gbigba agbara: Lights to show charging status.
• Ibudo Agbara USB: 5V, 2.1A output for charging mobile devices.
• Iwọn titẹ: Displays air pressure during inflation.
• Air Compressor Switch: Turns the air compressor on/off.
• Air Compressor Hose: Connects to tire valves for inflation.
• Afẹfẹ afẹfẹ: For heat dissipation during compressor operation.
• Jumper Cables (Positive & Negative): For connecting to vehicle battery terminals.
• Awọn asopọ Valve: Three additional nozzles for various inflatables.
• 12V DC Charging Cord: For charging the unit from a vehicle's cigarette lighter socket.
• AC Home Charger: For charging the unit from a standard wall outlet.

Eto ati gbigba agbara

Before first use, fully charge the BS ONE Jump Starter. It is recommended to recharge the unit after each use and every 3 months if not used regularly to maintain battery health.

Gbigba agbara si Ẹka naa:

1. Using the AC Home Charger:
   • Connect the AC home charger to the unit's charging jack.
   • Plug the charger into a standard 110V AC wall outlet.
   • The charging indicator will illuminate. Charge until the indicator shows a full charge.
2. Using the 12V DC Charging Cord (In-Car Charging):
   • Connect the 12V DC charging cord to the unit's charging jack.
   • Plug the other end into your vehicle's 12V cigarette lighter socket.
   • The charging indicator will illuminate. Charge until the indicator shows a full charge.

Image: Visual representation of the two charging methods: charging with a 110V AC adapter at home and charging with a 12V DC adapter in the car.

Awọn ilana Iṣiṣẹ

1. Fò Bẹ̀rẹ̀ Ọkọ̀ ayọ́kẹ́lẹ́:

Ensure the jump starter is fully charged before attempting to jump-start a vehicle.

1. Darapọ mọ Clamps: So rere pupa (+) clamp to the positive terminal of the vehicle's dead battery. Connect the black negative (-) clamp to a mọ, unpainted irin apa ti awọn ọkọ ká engine Àkọsílẹ tabi ẹnjini, kuro lati batiri.
2. Turn on Jump Starter: Locate the power switch on the jump starter and turn it to the "ON" position.
3. Ọkọ Bẹrẹ: Attempt to start the vehicle. If it doesn't start immediately, wait a few minutes and try again. Do not crank for more than 5 seconds at a time.
4. Yọ awọn okùn jumper kuro: Once the vehicle starts, immediately turn off the jump starter. Disconnect the black negative (-) clamp akọkọ, lẹhinna pupa rere (+) clamp.

Image: A visual guide demonstrating the four steps to jump-start a car: connecting clamps to the car battery, turning on the jump starter, starting the vehicle, and removing the jumper cables.

Image: The BS ONE 1000 Amp Jump Starter positioned near a car engine, with its cables ready for connection to the vehicle's battery terminals, illustrating its primary function.

2. Using the Air Compressor:

The built-in 260 PSI air compressor is suitable for inflating car tires, bicycle tires, sports balls, and other inflatables.

1. So okun: Screw the air compressor hose securely onto the tire valve stem or attach the appropriate valve connector for other inflatables.
2. Set Pressure (if applicable): While this model has a pressure gauge, it does not have an automatic shut-off. Monitor the pressure gauge closely.
3. Bẹ̀rẹ̀ ìfúnpọ̀: Flip the Air Compressor Switch to the "ON" position.
4. Gbe soke: Inflate to the desired pressure. For car tires, refer to your vehicle's recommended tire pressure (usually found on a sticker inside the driver's door jamb or in the owner's manual).
5. Stop Compressor: Once the desired pressure is reached, turn the Air Compressor Switch to "OFF".
6. Ge asopọ: Unscrew the hose from the valve stem.

Image: The BS ONE Jump Starter connected to a car tire, demonstrating its 260 PSI tire inflator function. The image also shows icons for car, bike, ball, and general inflating applications.

3. Using as a Power Station (USB & DC Output):

The unit can charge mobile devices via its USB port and power 12V accessories via its DC sockets.

• USB Output (5V, 2.1A):
  • Connect your device's USB charging cable to the USB Power Port on the jump starter.
  • Press the USB/Worklight Switch to activate the USB output.
  • Ẹrọ rẹ yoo bẹrẹ gbigba agbara.
• DC 12V Output (11A):
  • Plug your 12V accessory (e.g., car fridge, vacuum cleaner) into one of the DC 12V Sockets.
  • Ensure the accessory is compatible with the unit's 11A output limit.
  • The accessory will receive power.

Image: A man sitting in the trunk of a car, charging his smartphone using the BS ONE Jump Starter, highlighting its 12000mAh high capacity power pack with USB and DC outputs.

4. Lilo ina LED:

The built-in LED light provides illumination for various situations, such as roadside emergencies or camping.

• To turn on the LED light, press the USB/Worklight Switch.
• Press the switch again to cycle through light modes (if applicable) or turn off.

Image: The BS ONE Jump Starter providing illumination in a camping environment, demonstrating its emergency LED light feature for outdoor and indoor use.

Itoju

Proper maintenance ensures the longevity and optimal performance of your BS ONE Jump Starter:

• Ngba agbara: Recharge the unit after each use. If not used, recharge every 3 months to prevent battery degradation.
• Ninu: Mu ẹyọ kuro pẹlu asọ ti o gbẹ, asọ. Ma ṣe lo abrasive ose tabi epo.
• Ibi ipamọ: Store the unit in a cool, dry place, away from direct sunlight and moisture. Ensure the clamps are clean and properly stored to prevent accidental contact.
• Iwọn otutu: The unit is designed to withstand extreme temperatures (-4°F to 140°F), but prolonged exposure to these extremes when not in use should be avoided for optimal battery life.

Image: The BS ONE Jump Starter depicted in both a snowy, cold environment (-20°C / -4°F) and a hot, desert environment (60°C / 140°F), illustrating its ability to work in extreme temperatures.

Laasigbotitusita

If you encounter issues with your BS ONE Jump Starter, refer to the following common problems and solutions:

Awọn pato

Atilẹyin ọja ati Support

BS ONE offers a 1-odun atilẹyin ọja ati s'aiye imọ support for your jump starter. If you encounter any problems or have questions regarding your product, please contact BS ONE customer service for assistance.

For support, please refer to the contact information provided with your purchase or visit the official BS ONE webojula.