Pretul SOIN-101MP Mini Inverter Welder User Manual

1. Ifihan

Thank you for choosing the Pretul SOIN-101MP Mini Inverter Welder. This compact and lightweight welding machine is designed for shielded metal arc welding (SMAW) processes, offering higher efficiency and lower power consumption compared to conventional welders. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new welder.

Please read this manual thoroughly before operating the machine and keep it for future reference.

2. Alaye Aabo

IKILO: Alurinmorin le lewu. Tẹle awọn iṣọra ailewu nigbagbogbo lati yago fun ipalara nla tabi iku.

• Always wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, welding gloves, protective clothing, and safety shoes.
• Rí i dájú pé afẹ́fẹ́ tó péye wà ní ibi iṣẹ́ láti yẹra fún mímú èéfín àlòpọ̀.
• Protect yourself and others from electric shock. Do not touch live electrical parts. Ensure the machine is properly grounded.
• Be aware of fire and explosion hazards. Remove all flammable materials from the welding area. Have a fire extinguisher readily available.
• Arc rays can burn eyes and skin. Use proper eye and face protection.
• Do not operate the welder in wet conditions or near water.
• Ge asopọ agbara ṣaaju ṣiṣe eyikeyi itọju tabi awọn atunṣe.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

Image: The Pretul SOIN-101MP Mini Inverter Welder shown with all its included accessories: the welding machine, electrode holder cable, ground clamp cable, shoulder strap, protective welding mask, wire brush, power cable with plug, and a pack of welding electrodes.

• 1 x Pretul SOIN-101MP Mini Inverter Welder
• 1 x Electrode Holder Cable (2 m, #7 AWG / 10 mm²)
• 1 x Ilẹ Clamp Cable (2 m, #7 AWG / 10 mm²)
• 1 x Okun ejika
• 1 x Protective Welding Mask
• 1 x Wire Brush
• 1 x Okun agbara pẹlu Plug
• 1 x 1 kg pack of 1/8" E6013-4 Electrodes

Image: A visual list of included accessories, detailing the ground clamp cable, electrode holder cable, strap, protective mask, wire brush, power cable, and electrodes.

4. Ọja Ipariview

Familiarize yourself with the main components of your Pretul SOIN-101MP welder:

Aworan: A alaye view of the welder, highlighting key components such as the electronic current adjustment control, power cable input, on/off switch, and quick-change terminals.

• Electronic Control for Current Adjustment: Digital display and knob for precise amperage eto.
• Input Okun Agbara: Connection point for the main power supply.
• Tan/Pa Yipada: Iṣakoso agbara akọkọ fun ẹrọ naa.
• Quick-Change Terminals (Bornes): 3/8" terminals for connecting the electrode holder and ground clamp awọn kebulu.
• Olufẹ itutu: Located internally to prevent overheating.

5. Eto

1. Ibi: Place the welder on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure there is sufficient space around the unit for air circulation.
2. So Ilẹ Clamp: So ilẹ clamp cable to the appropriate quick-change terminal on the welder. Securely attach the ground clamp to the workpiece or a clean, bare metal part of the welding table, ensuring good electrical contact.
3. So ohun tí ó so mọ́ elekitirodu: Connect the electrode holder cable to the other quick-change terminal on the welder. Insert the desired electrode into the electrode holder.
4. Asopọ agbara: Ensure the welder's ON/OFF switch is in the "OFF" position. Plug the power cable into a grounded 127 V, 1-phase power outlet.
5. Ohun elo Idaabobo Ti ara ẹni (PPE): Before turning on the welder, put on all necessary PPE, including your welding helmet, gloves, and protective clothing.

6. Awọn ilana Iṣiṣẹ

1. Tan-an: Flip the ON/OFF switch to the "ON" position. The digital display will illuminate.
2. Ṣatunṣe lọwọlọwọ: Use the current adjustment knob to set the desired amperage. The digital display will show the selected current. Refer to the electrode manufacturer's recommendations for appropriate current settings.
3. Àṣàyàn elekitirodu: This welder is designed for shielded metal arc welding (SMAW) and is compatible with the following electrode types:
   • 6013 (Up to 1/8")
   • 6011 (Up to 1/8")
   • 7018 (Up to 3/32")
   

   Image: A chart illustrating compatible electrode types (6013, 6011, 7018) and their recommended sizes for 1-phase operation with the SMAW process. It also indicates N/A for TIG tungsten.

4. Bẹrẹ Alurinmorin: With the electrode in the holder and the ground clamp attached, strike an arc on the workpiece. Maintain a consistent arc length and travel speed for optimal weld quality.
5. Lẹhin-Welding: After completing the weld, turn off the welder. Allow the machine to cool down before storing. Clean the workpiece and remove any slag.

7. Itọju

Itọju deedee n ṣe idaniloju igba pipẹ ati iṣẹ ṣiṣe ti o dara julọ ti alurinmorin rẹ.

• Ninu: Periodically clean the exterior of the welder with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• Ayẹwo USB: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damaged insulation. Replace any damaged cables immediately.
• Ṣíṣàyẹ̀wò Ibùdó: Ensure the quick-change terminals are clean and free of corrosion. Tighten connections as needed.
• Ibi ipamọ: Store the welder in a dry, clean environment, away from direct sunlight and extreme temperatures.

8. Laasigbotitusita

9. Awọn pato

Image: The Pretul SOIN-101MP welder with dimensions indicated: 18 cm height, 25 cm depth, and 10 cm base width.

Awọn ẹya Imọ-ẹrọ:

Image: A list of technical features including IGBT Inverter, Thermal Protect, Arc Force, Anti Stick, Hot Start, and Lift TIG, with brief descriptions.

• IGBT Inverter Technology: Allows operation at any current level, providing stable and efficient welding.
• Thermal Protect: Thermal protection against overload, automatically shutting down the unit to prevent damage.
• Agbara Arc: Adjusts the optimal arc value and allows welding in different positions.
• Anti Stick: Prevents overheating and sticking of the electrode to the workpiece.
• Ibẹrẹ Gbona: Facilitates arc ignition, making it easier to start welding.
• Gbe TIG soke: Facilitates arc ignition with the TIG process (Note: This model is primarily for SMAW, TIG functionality may require additional accessories not included).

10. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation included with your product or contact Pretul customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, you may visit the official Pretul brand store on Amazon: Pretul Store