1. Ifihan
The Laserliner MultiWet-Finder Plus is a versatile diagnostic tool designed for non-destructive measurement of material moisture and ambient conditions. It provides quick and reliable readings for various building materials, along with air temperature, relative humidity, and dew point temperature. This manual provides essential information for the safe and efficient operation of your device.
Nọmba 1: The Laserliner MultiWet-Finder Plus device. This image shows the front view of the device, highlighting its large digital display, control buttons, and the spherical sensor at the top.
2. Awọn ilana aabo
Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or injury.
- Keep the device away from moisture and direct sunlight.
- Do not open the device. Repairs should only be performed by authorized personnel.
- Use only specified batteries. Ensure correct polarity during installation.
- Yago fun awọn ipa ti o lagbara tabi sisọ ẹrọ naa silẹ.
- Má ṣe lo ohun èlò náà níbi tí àwọn ohun afẹ́fẹ́ ń bú gbàù tàbí níbi tí ó wà nítòsí àwọn ohun èlò tí ó lè jóná.
- Sọ awọn batiri ati ẹrọ naa sọnu ni ibamu si awọn ilana agbegbe.
3. Ọja Ipariview
3.1 Device irinše
The MultiWet-Finder Plus features a robust design with intuitive controls and a clear display.
- Sensọ iyipo: For non-destructive material moisture measurement.
- Ifihan LCD: Shows measurement values, modes, and indicators.
- Bọtini MODE: To switch between measurement modes (Index, CM%, MASS%).
- REF Button: To set a reference value.
- MAX/SET Button: Si view maximum/minimum values or confirm settings.
- FIND Button: To activate the measurement.
- Temperature/Humidity Sensors: Located on the side for ambient condition measurements.
Nọmba 2: Apa view of the device showing the integrated sensors for air temperature and relative humidity. The image also indicates the measurement ranges for these sensors: air temperature from -10°C to 60°C, relative humidity from 20% to 90% RH, and dew point temperature from -20°C to 60°C.
3.2 Ifihan Ifihan
Ifihan LCD n pese alaye okeerẹ:
- Iwọn otutu (°C): Ambient air temperature.
- Relative Humidity (% RH): Ambient air humidity.
- Dew Point Temperature (°C): Calculated dew point.
- Moisture Index: A relative value indicating moisture content.
- CM% / MASS%: Specific moisture content for selected materials.
- DRY/WET Bar Graph: Visual indication of moisture level (green for dry, red for wet).
Nọmba 3: The device's display showing readings in "INDEX MODE". This view includes air temperature, relative humidity, dew point, and a large numerical index value, along with the DRY/WET bar graph.
Nọmba 4: The device's display showing readings in "CM%" or "MASS%" mode. This view provides specific moisture content percentages, alongside the ambient condition readings.
4. Eto
4.1 Fifi sori batiri
The MultiWet-Finder Plus requires standard AAA batteries for operation.
- Wa ideri iyẹwu batiri ni ẹhin ẹrọ naa.
- Open the cover by sliding or unscrewing it (refer to the diagram if available).
- Insert the required number of AAA batteries, ensuring correct polarity (+/-).
- Pa ideri batiri naa ni aabo.
Nọmba 5: The MultiWet-Finder Plus shown alongside its packaging, which indicates the use of AAA batteries. This image implies the battery type required for the device.
5. Awọn ilana Iṣiṣẹ
5.1 Titan / Pa a
Tẹ mọlẹ MODE button to power the device on or off.
5.2 Yíyan Ipò Wíwọ̀n
Ni soki tẹ awọn MODE bọtini lati yiyi nipasẹ awọn ipo wiwọn to wa:
- INDEX Mode: Provides a relative moisture index, useful for quick comparisons and identifying moisture patterns.
- CM% / MASS% Mode: Displays specific moisture content as a percentage for selected material types. Refer to the device's internal material tables for accurate readings.
5.3 Taking a Material Moisture Measurement
- Select the desired measurement mode using the MODE bọtini.
- Place the spherical sensor directly onto the surface of the material to be measured. Ensure full contact.
- Tẹ awọn WA bọtini lati pilẹṣẹ wiwọn.
- Read the moisture value on the display. The device measures moisture up to a depth of approximately 40 mm.
Nọmba 6: Illustration demonstrating the non-destructive measurement capability of the MultiWet-Finder Plus. The image shows the spherical sensor penetrating a material surface, indicating a measurement depth of up to 40 mm.
Nọmba 7: Close-up of the device's display, highlighting the DRY/WET bar graph and the control buttons. The bar graph visually represents the moisture level, transitioning from green (dry) to red (wet).
5.4 Ambient Condition Measurement
The device continuously measures air temperature, relative humidity, and calculates the dew point temperature. These values are displayed on the upper part of the LCD screen.
5.5 Reference Function (REF)
Awọn REF button allows you to set a reference value. This is useful for comparing current measurements against a known dry or acceptable moisture level in a specific material.
- Take a measurement on a known dry area of the material.
- Tẹ mọlẹ REF button to set this value as the reference.
- Subsequent measurements will show the deviation from this reference.
5.6 Max/Min Function (MAX SET)
Tẹ awọn MAX/SET bọtini lati view the maximum or minimum measured values during a session. This helps in identifying the highest or lowest moisture points.
5.7 Digital Connection (App)
The MultiWet-Finder Plus supports digital connection to a smartphone application for data logging and analysis. Refer to the app's instructions for pairing and usage.
Nọmba 8: The MultiWet-Finder Plus wirelessly connected to a smartphone displaying the "DIGITAL CONNECTION" feature. This image illustrates the device's capability to transmit data to a mobile application for further analysis and recording.
Nọmba 9: The MultiWet-Finder Plus being used in a bathroom setting, indicating its application in detecting moisture in damp environments. The image shows the device pointed towards a wall, with a water droplet icon suggesting moisture detection.
6. Itọju
- Ninu: Nu ẹrọ naa pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
- Ibi ipamọ: Store the device in a dry, cool place, away from direct sunlight. Remove batteries if storing for extended periods to prevent leakage.
- Iṣatunṣe: The device is factory calibrated. If you suspect inaccuracies, contact Laserliner support for recalibration services.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ naa ko ṣiṣẹ. | Awọn batiri ti o ku tabi ti ko tọ fi sii. | Rọpo awọn batiri pẹlu awọn tuntun, ni idaniloju polarity ti o pe. |
| Inaccurate moisture readings. | Poor contact with material, incorrect mode selected, or material outside measurement range. | Ensure full contact with the spherical sensor. Select the appropriate material mode. Consult specifications for measurement range. |
| Ifihan ti ṣofo tabi yiyi. | Low battery power or internal error. | Rọpo awọn batiri. Ti iṣoro naa ba tẹsiwaju, kan si atilẹyin alabara. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 082.091A |
| Ọja Mefa | 5.51 x 5.51 x 8.66 inches |
| Iwọn | 1.32 iwon |
| Olupese | laserliner |
| Ohun elo | Stainless Steel (sensor ball, device body is likely plastic) |
| Ijinle Wiwọn | Approx. 40 mm (non-destructive) |
| Air otutu Ibiti | -10°C si 60°C |
| Ojulumo ọriniinitutu Range | 20% si 90% RH |
| Ìri Point otutu Range | -20°C si 60°C |
9. Atilẹyin ọja ati Support
For warranty information, technical support, or service inquiries, please contact Laserliner customer service or visit their official webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.
Olupese: laserliner
Webojula: www.laserliner.com (Eksample ọna asopọ, ọna asopọ gangan le yatọ)
