1. Ifihan
Thank you for choosing the Scheppach HC06 6L 8 Bar Air Compressor. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new air compressor. Please read this manual thoroughly before initial use and keep it for future reference. This portable, oil-free compressor is designed for various tasks, including inflating, powering pneumatic tools, and operating spray painting equipment.
2. Awọn ilana aabo
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or property damage.
Gbogbogbo Abo
- Ka gbogbo awọn ilana: Mọ ara rẹ pẹlu awọn iṣakoso ati lilo to dara ti ẹrọ naa.
- Aabo Itanna: Rii daju pe ipese agbara ibaamu voltage specified on the compressor. Use a grounded outlet and avoid using extension cords unless absolutely necessary and rated for the compressor's power requirements.
- Ayika Ṣiṣẹ: Operate the compressor in a well-ventilated area. Do not use in damp or wet conditions, or near flammable liquids or gases.
- Ohun elo Idaabobo Ti ara ẹni (PPE): Always wear safety glasses or goggles. Hearing protection is recommended due to the noise level (97 dB).
- Awọn ọmọde ati Awọn Oluduro: Pa awọn ọmọde ati awọn eniyan laigba aṣẹ kuro ni agbegbe iṣẹ.
- Aabo Titẹ: Never exceed the maximum operating pressure of the compressor or the tool being used. Do not direct compressed air at people or animals.
- Itọju: Ge asopọ agbara agbara ṣaaju ṣiṣe eyikeyi itọju tabi awọn atunṣe.
3. Ọja Ipariview
The Scheppach HC06 is a compact and portable air compressor designed for ease of use and transport. It features an oil-free motor for reduced maintenance.
Nọmba 1: Scheppach HC06 Air Compressor with a coiled air hose, tire inflator with gauge, and blow gun.
Awọn eroja pataki:
- Air ojò: 6-liter capacity for storing compressed air.
- Mọto: 1200W powerful, oil-free motor.
- Àwọn Òṣùwọ̀n Ìfúnpá: Displays tank pressure and regulated outlet pressure.
- Olutọsọna titẹ: Gba laaye lati ṣatunṣe titẹ afẹfẹ ti o wu jade.
- Asopọ kiakia: For easily attaching air hoses and tools.
- Sisan Ikun: Ti wa ni isalẹ ojò naa fun fifa omi kuro ninu omi.
- Ọwọ Gbe: Imudani ti a ṣepọ fun irọrun gbigbe.
Nọmba 2: The compact design and integrated handle make the HC06 easy to transport.
4. Eto
Follow these steps for initial setup of your air compressor.
- Ṣii silẹ: Carefully remove the compressor and all accessories from the packaging. Inspect for any shipping damage.
- Ibi: Place the compressor on a stable, level surface. Ensure there is adequate ventilation around the unit.
- Asopọmọra itanna: So okùn agbara pọ mọ ihò ina 230V ti a fi ilẹ ṣe.
- So okun Afẹfẹ: Connect your air hose to the quick connector on the compressor. Ensure a secure fit.
- Ṣiṣe Ibẹrẹ: Before connecting any tools, turn on the compressor and allow it to build pressure until it automatically shuts off. Check for any unusual noises or air leaks.
Nọmba 3: The compressor is ready for use on a stable workbench.
5. Awọn ilana Iṣiṣẹ
This section details how to operate your Scheppach HC06 air compressor for various applications.
Bibẹrẹ ati Iduro
- Lati bẹrẹ: Flip the ON/OFF switch to the 'ON' position. The compressor will begin to build pressure.
- Tiipa aifọwọyi: The compressor will automatically shut off once the maximum tank pressure (8 bar) is reached. It will restart automatically when the pressure drops below a certain threshold.
- Lati Duro: Flip the ON/OFF switch to the 'OFF' position.
Adjusting Output Pressure
- Ensure the compressor is running and the tank is pressurized.
- Turn the pressure regulator knob (usually red) to increase or decrease the output pressure. Observe the regulated pressure gauge.
- Always set the output pressure according to the requirements of your air tool or application.
Using with Accessories and Tools
Nọmba 4: Inflating a car tire with the HC06 compressor and included accessories.
- Tire Tire: Attach the tire inflator to the air hose. Connect the inflator to the tire valve and monitor the pressure gauge on the inflator.
- Blowing/Cleaning: Attach the blow gun to the air hose. Use short bursts of air for cleaning surfaces or drying.
- Pneumatic Tools: Connect your pneumatic tool to the air hose. Ensure the tool's operating pressure matches the regulated output pressure of the compressor.
Nọmba 5: The HC06 can power various pneumatic tools, such as this circular saw.
6. Itọju
The Scheppach HC06 is an oil-free compressor, requiring minimal maintenance. Regular checks ensure longevity and optimal performance.
Imugbẹ Imugbẹ
Compressed air contains moisture, which condenses in the tank. This water must be drained regularly to prevent corrosion and maintain tank capacity.
- Ensure the compressor is turned off and disconnected from the power supply.
- Place a suitable container under the drain valve located at the bottom of the tank.
- Slowly open the drain valve to release the condensed water and any remaining air pressure.
- Close the drain valve securely once all water has been expelled.
Gbogbogbo Cleaning ati Ibi ipamọ
- Ninu: Pa òde compressor náà mọ́ pẹ̀lú ìpolówóamp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
- Ibi ipamọ: Store the compressor in a dry, clean, and protected area when not in use. Ensure the tank is drained of condensation before storage.
Nọmba 6: Proper storage helps protect the compressor and prolong its lifespan.
7. Laasigbotitusita
Abala yii n pese awọn ojutu si awọn ọran ti o wọpọ ti o le ba pade pẹlu compressor afẹfẹ rẹ.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Compressor ko bẹrẹ | Ko si ipese agbara ON/OFF switch in 'OFF' position Gbona apọju ti mu ṣiṣẹ | Ṣayẹwo asopọ agbara ati iṣan Flip switch to 'ON' Allow compressor to cool down, then restart |
| Low or no air pressure at outlet | Ti ṣeto olutọsọna titẹ ti o kere ju Air leak in hose or connections Tank pressure too low | Adjust regulator knob Check all connections for leaks, tighten or replace Allow compressor to build full tank pressure |
| Compressor nṣiṣẹ continuously | Air leak in tank or connections Aṣiṣe titẹ titẹ | Check for leaks, tighten connections Kan si atilẹyin alabara fun iṣẹ |
| Ariwo pupọ tabi gbigbọn | Awọn paati alaimuṣinṣin Compressor not on a level surface | Check and tighten all visible fasteners Gbe sori iduro, ipele ipele |
8. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | Schepach |
| Awoṣe | HC06 |
| Agbara | 1200 W |
| Iwọn ojò | 6 liters |
| Iwọn Iṣiṣẹ ti o pọju | 8 Pẹpẹ |
| Air Sisan Agbara | 200 liters fun iseju |
| Voltage | 230 Volts |
| Ariwo Ipele | 97 dB |
| Iwọn Nkan | kilo 11.7 (25.7 poun) |
| Awọn iwọn Ọja (L x W x H) | 12.76" x 10.87" x 13.78" |
| Pataki Ẹya | Portable, Oil-free |
| Awọn irinše to wa | Accessories (hose, tire inflator, blow gun, adapters) |
9. Atilẹyin ọja ati Support
Scheppach products are manufactured to high-quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and claim procedures.
For technical assistance, spare parts, or warranty claims, please contact Scheppach customer support. Ensure you have your model number (HC06) and proof of purchase available when contacting support.
Àkókò Wíwà Àwọn Ohun Èlò Pàtàkì EU: ọdun meji 7
