Ọrọ Iṣaaju
This manual provides comprehensive instructions for the installation, operation, and maintenance of the EnGenius Gigabit Proprietary PoE Adapter with Reset Button, model EPA2406GR. This adapter is designed to deliver both high-speed data and power over Ethernet to compatible EnGenius outdoor access points, ensuring reliable network connectivity and power delivery.
Ọja Pariview
The EnGenius EPA2406GR is a compact and efficient Power-over-Ethernet (PoE) adapter. It features a proprietary design optimized for EnGenius devices, providing up to 14.4 watts of power. Key features include:
- Awọn ibudo Gigabit Ethernet: Equipped with both input and output Gigabit Ethernet ports for high-speed data transfer.
- Integrated Power Delivery: Delivers both data and power to compatible EnGenius outdoor access points.
- Bọtini Tunto Rọrun: A built-in reset button on the PoE injector allows for easy device resets without physical access to the connected device.
- Idaabobo Alagidi: Includes disconnect, short-circuit, and surge protection to safeguard connected equipment.
- Iṣagbesori Rọ: Designed for easy mounting to walls or ceilings with included hardware.
- Ti o gbooro sii: Capable of extending power to unwired areas up to 328 feet (100 meters).
This image displays the EnGenius Gigabit Proprietary PoE Adapter, highlighting its compact black casing and the labeled PWR (Power), PoE (Power over Ethernet), and LAN (Local Area Network) ports. The EnGenius logo is visible on the top surface.
Eto ati fifi sori
Follow these steps to properly set up and install your EnGenius PoE Adapter:
- Iṣagbesori: Choose a suitable location for the adapter, preferably near a power outlet and your network equipment. Use the included hardware to mount the adapter securely to a wall or ceiling. Ensure adequate ventilation around the device.
- So Nẹ́tíwọ́ọ̀kì pọ̀: So okùn Ethernet kan lati inu yipada nẹtiwọọki tabi olulana rẹ si LAN ibudo lori Poe ohun ti nmu badọgba.
- So PoE Output pọ: So okùn Ethernet miiran pọ lati inu DARA port on the adapter to the compatible EnGenius outdoor access point or other PoE-powered device. This cable will carry both data and power.
- So agbara: Plug the power cord into the adapter's power input and then into a standard electrical outlet. The PWR indicator light on the adapter should illuminate, indicating that the unit is receiving power.
- Jẹrisi Asopọmọra: Once all connections are made, verify that the connected EnGenius device is powered on and functioning correctly.
Awọn ilana Iṣiṣẹ
The EnGenius EPA2406GR operates automatically once connected and powered. It provides continuous data and power to the connected PoE device.
- Atọka Agbara (PWR): A solid light indicates that the adapter is receiving power.
- PoE Indicator (PoE): This light indicates that power is being supplied to the connected PoE device.
- LAN Indicator (LAN): This light indicates active data connection to your network.
- Bọtini atunto: The reset button is located on the PoE injector. Pressing this button will initiate a reset of the connected EnGenius device. This is particularly useful for remote devices that are difficult to access physically. Consult your connected device's manual for specific reset procedures (e.g., short press for reboot, long press for factory reset).
Itoju
The EnGenius PoE Adapter is designed for minimal maintenance. To ensure optimal performance and longevity:
- Ninu: Periodically wipe the exterior of the adapter with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Afẹfẹ: Ensure that the adapter is placed in an area with adequate airflow to prevent overheating. Do not block ventilation openings.
- Iduroṣinṣin USB: Regularly inspect Ethernet cables for any signs of damage or wear. Replace damaged cables immediately to prevent connectivity issues or potential hazards.
- Awọn ipo Ayika: Operate the adapter within its specified environmental conditions (temperature, humidity) to avoid damage.
Laasigbotitusita
If you encounter issues with your EnGenius PoE Adapter, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No Power (PWR light off) | Power cord not connected; Power outlet faulty; Adapter malfunction. | Ensure power cord is securely plugged into adapter and outlet. Test outlet with another device. If problem persists, contact support. |
| No Data Connection (LAN light off) | Ethernet cable faulty or disconnected; Network device issue; Incorrect port connection. | Check Ethernet cable connections to the LAN port. Try a different cable. Verify your network switch/router is functioning. |
| No Power to PoE Device (PoE light off) | PoE cable faulty or disconnected; Connected device not PoE compatible; Overload/short circuit. | Ensure Ethernet cable from PoE port to device is secure. Verify the connected device is compatible with passive PoE. Check for short circuits in the cable run. |
| Connected Device Unresponsive | Device frozen; Network configuration issue. | Use the reset button on the PoE adapter to reboot the connected device. Check network settings on the connected device. |
Awọn pato
Detailed technical specifications for the EnGenius EPA2406GR PoE Adapter:
- Awoṣe: EPA2406GR
- Awọn iwọn ọja: 1 x 6.2 x 5 inches
- Ìwọ̀n Nkan: 8 iwon (0.5 iwon)
- Ni wiwo Hardware: Àjọlò
- Àwọ̀: Dudu
- Awọn ẹrọ ibaramu: EnStation5-AC(v2), ENH500v3, ENS500EXT-AC(v2)
- Ilana Ọna asopọ Data: Àjọlò
- Oṣuwọn Gbigbe Data: 1000 Megabits Per Second (1 Gigabit)
- UPC: 655216008649
- ASIN: B0C6BLMBXL
- Olupese: ENGENIUS TECHNOLOGIES,INC
- Ọjọ akọkọ ti o wa: Oṣu Karun ọjọ 2, Ọdun 2023
Atilẹyin ọja ati Support
For warranty information, technical support, or further assistance with your EnGenius product, please visit the official EnGenius webojú-òpó wẹ́ẹ̀bù tàbí kí o kàn sí ẹ̀ka iṣẹ́ ìtọ́jú oníbàárà wọn. O tún le rí àwọn ìwífún àti àwọn ohun èlò míràn lórí EnGenius Brand Store on Amazon.
