1. Ifihan
Thank you for choosing the HIBREW H1A Multi-Capsule Espresso Coffee Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee machine. Please read it thoroughly before first use and keep it for future reference.
Awọn Itọsọna Aabo pataki
- Ka gbogbo awọn ilana ṣaaju lilo ohun elo naa.
- Maṣe fi ohun elo, okun agbara, tabi pulọọgi sinu omi tabi awọn olomi miiran.
- Rii daju voltage specified on the appliance matches your local power supply.
- Pa ohun elo naa kuro ni arọwọto awọn ọmọde.
- Unplug the machine when not in use and before cleaning.
- Ma ṣe ṣiṣẹ ẹrọ naa pẹlu okun tabi plug ti o bajẹ.
- Use only clean, cold water in the water tank.
- Yago fun olubasọrọ pẹlu gbona roboto.
2. Ọja irinše
Familiarize yourself with the various parts of your HIBREW H1A coffee machine.

Nọmba 2.1: Pariview of the HIBREW H1A Multi-Capsule Espresso Coffee Machine. This image displays the compact black coffee machine with a clear water tank, a cup of freshly brewed coffee, and various capsule types and coffee beans around its base.

Nọmba 2.2: Iwaju view of the HIBREW H1A coffee machine, highlighting the control panel with power, short espresso, and lungo buttons, along with the coffee spout and drip tray.
Awọn ẹya bọtini:
- Omi omi: Removable 600ml BPA-free tank for water.
- Ibi iwaju alabujuto: Power button, Short Espresso button, Lungo button.
- Yàrá Ìpèsè Ọtí: Area where capsule adapters or ground coffee adapter are inserted.
- Kofi Spout: Ibi ti brewed kofi dispenses.
- Drip Atẹ: Atẹ ti a le yọ kuro lati mu awọn omi ati awọn ti o tu silẹ.
- Awọn Adapter Capsule: Includes adapters for Nes, DG, ES* pods, and K-Cu* capsules.
- Adapter Kofi Ilẹ: For use with ground coffee.
3. First Use and Setup
3.1 Ṣiṣii silẹ
Carefully remove all packaging materials. Ensure all components listed in Section 2 are present and undamaged. Keep packaging for future transport if needed.
3.2 Ni ibẹrẹ Cleaning
- Remove the water tank and wash it with mild detergent and warm water. Rinse thoroughly.
- Clean the drip tray and any capsule adapters with warm, soapy water. Rinse and dry.
- Mu ese ita ẹrọ naa pẹlu ipolowoamp asọ.
3.3 Kikun Omi Omi
- Fill the water tank with fresh, cold drinking water up to the MAX level indicator.
- Gbe ojò omi pada sori ẹrọ, ni idaniloju pe o joko ni aabo.
3.4 Ipilẹ ẹrọ naa (Lilo akọkọ)
Before brewing coffee for the first time, or if the machine has not been used for a long period, it is essential to prime the system:
- Rii daju pe ojò omi ti kun.
- Gbe ife ti o ṣofo sori atẹ ti nṣan.
- Do not insert any capsule or ground coffee adapter.
- Pulọọgi ẹrọ naa sinu iṣan agbara kan.
- Press the Power button. The machine will begin preheating.
- Once preheating is complete (buttons stop flashing), press the Lungo button. Water will dispense into the cup.
- Repeat this process 2-3 times to thoroughly flush the system.
4. Awọn ilana Iṣiṣẹ
4.1 Lilo Agbára àti Ṣíṣe Àtúnṣe
- Rii daju pe ojò omi ti kun pẹlu omi titun.
- Pulọọgi ẹrọ naa sinu iṣan agbara kan.
- Press the Power button. The machine will start preheating. The Short Espresso and Lungo buttons will flash during this time.
- Preheating typically takes about 40 seconds. The buttons will stop flashing and remain steadily lit when the machine is ready for brewing.
4.2 Using Different Adapters (4-in-1 Compatibility)
The HIBREW H1A is compatible with various coffee formats:

Nọmba 4.1: Illustration of the HIBREW H1A's 4-in-1 compatibility, displaying adapters for KEURIG K-Cup, Nes OriginalLine, L'OR, LAVAZZA, Dolce Gusto Nes, Dolce Gusto Starbucks capsules, and a ground coffee adapter. Note: Not suitable for Nes VertuoLine or ESE Pods.
- Ṣii ideri iyẹwu Pipọnti.
- Select the appropriate adapter for your chosen coffee format (Nes, DG, K-Cup, ES* pod, or ground coffee).
- Insert the capsule or fill the ground coffee adapter with your desired amount of coffee.
- Place the loaded adapter into the brewing chamber.
- Close the brewing chamber lid firmly until it clicks into place.
4.3 Brewing Coffee (Hot Brew Mode)
After preheating and inserting your coffee:

Nọmba 4.2: Instructions for activating Hot Brew Mode (quick press On/Off button) and Cold Brew Mode (press On/Off button for 2 seconds) on the HIBREW H1A coffee machine.
- Gbe ife kan sori atẹ drip.
- Fun Hot Brew Mode, ensure the machine is preheated (buttons steadily lit).
- Tẹ boya awọn Short Espresso button (70 mL) tabi awọn Lungo button (110 mL). The machine will begin brewing.
- The brewing process will stop automatically once the selected volume is dispensed.
- To stop brewing manually at any time, press the active brew button again.
4.4 Cold Brew Mode
The HIBREW H1A also supports cold brewing:
- Insert your desired capsule or ground coffee adapter.
- Place a cup with ice on the drip tray.
- Tẹ mọlẹ Bọtini agbara fun awọn aaya 2 to enter Cold Brew Mode.
- Press either the Short Espresso or Lungo button to start brewing.
- Note: Cold brew mode brews at room temperature and does not have a refrigeration function. Add ice to your cup before brewing.
4.5 Customizing Brew Volume
You can customize the brew volume for both Short Espresso and Lungo buttons:

Nọmba 4.3: Diagram illustrating preset brew times (Short Espresso: 25s/30ml, Lungo Espresso: 47s/60ml) and custom brew time options (15s-90s, 0-300ml) for the HIBREW H1A coffee machine.
- Ensure the machine is preheated and an adapter is inserted (without a capsule for programming).
- Gbe ago kan labẹ itọ.
- Press and hold the desired brew button (Short Espresso or Lungo) until the desired volume is dispensed into the cup.
- Release the button. The new volume is now programmed for that button.
- To reset to factory settings, unplug the machine for 30 seconds, then plug it back in.
4.6 Aifọwọyi Tiipa
For energy efficiency and safety, the HIBREW H1A features an automatic shut-off function. The machine will automatically turn off after 15 minutes of inactivity.
5. Ninu ati Itọju
Ṣiṣe mimọ nigbagbogbo ṣe idaniloju iṣẹ ṣiṣe ti o dara julọ ati fa igbesi aye ti ẹrọ kọfi rẹ pọ.
5.1 Daily Cleaning
- Omi omi: Tú omi inú ọkọ̀ náà kí o sì fi omi fọ̀ ọ́ lójoojúmọ́. Tún fi omi tuntun kún un kí o tó lò ó lẹ́ẹ̀kọ̀ọ̀kan.
- Drip Atẹ: Empty and clean the drip tray after each use or when the indicator shows it's full. Wash with warm, soapy water and rinse thoroughly.
- Awọn Adapter Capsule: Remove and rinse the used capsule adapter after each brew. For ground coffee, discard used grounds and rinse the adapter.
- Òde: Mu ese ita ẹrọ naa pẹlu asọ, damp asọ. Maṣe lo awọn afọmọ abrasive tabi fi omi bọ ẹrọ naa sinu omi.
5.2 Nipasẹ
Over time, mineral deposits (limescale) can build up in your machine, affecting performance and coffee taste. Descale your machine every 2-3 months, or more frequently if you have hard water.
- Ṣofo ojò omi ati atẹ drip.
- Fill the water tank with a descaling solution (follow the descaler manufacturer's instructions) or a mixture of white vinegar and water (1:1 ratio).
- Gbe eiyan nla kan si labẹ itọ kofi.
- Turn on the machine and allow it to preheat.
- Run several Lungo cycles until the water tank is empty.
- Fi omi ṣan omi daradara ki o si fi omi tutu kun.
- Run several Lungo cycles with fresh water to rinse out any remaining descaling solution.
6. Laasigbotitusita
If you encounter issues with your HIBREW H1A, refer to the following table for common problems and solutions.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ko ni tan-an. | Ko si ipese agbara. | Ṣayẹwo boya okun agbara ti wa ni edidi ni aabo sinu iṣan ati ẹrọ naa. Ṣe idanwo iṣan jade pẹlu ohun elo miiran. |
| Ko si kofi dispenses. | Water tank empty; machine not primed; brewing chamber blocked. | Fill water tank. Prime the machine (Section 3.4). Check if the capsule or adapter is correctly inserted and not blocked. |
| Kofi jẹ alailagbara tabi omi. | Incorrect coffee grind/capsule; machine needs descaling. | Ensure you are using appropriate coffee for the adapter. Descale the machine (Section 5.2). |
| Omi n jo lati inu ẹrọ naa. | Omi omi ko joko daradara; drip atẹ kun. | Ensure the water tank is correctly positioned. Empty and clean the drip tray. |
| Buttons are flashing continuously. | Machine is preheating; error. | Wait for preheating to complete (buttons become steady). If flashing persists, unplug and replug the machine. |
7. Imọ ni pato
Detailed technical information for the HIBREW H1A coffee machine.

Nọmba 7.1: The compact design of the HIBREW H1A coffee machine, showing its dimensions (26cm depth, 11cm width, 26cm height) and the 600ml BPA-free water tank. It also indicates a maximum cup height of 9.6cm.
- Brand: HIBREW
- Nọmba awoṣe: ST504-B
- Àwọ̀: Dudu
- Awọn iwọn Ọja (L x W x H): 26 x 11 x 26 cm
- Ìwọ̀n Nkan: 2.7 kilo
- Agbara: 600 Milliliters (Water Tank)
- Agbara: 1450 Wattis
- Voltage: 220 Volts
- Ohun elo: Ṣiṣu
- Iṣẹ Tiipa Aifọwọyi: Bẹẹni (lẹhin iṣẹju 15)
- Ẹya Pataki: Automatic Shut-off, Programmable, Removable Water Tank
- Irisi Ẹlẹda Kofi: Espresso ẹrọ
- Titẹ: 19 Ifi
- Awọn lilo ti a ṣe iṣeduro: Office, Kitchen, Living Room
- Awọn Lilo Pataki fun Ọja: Iced Coffee, Cappuccino, Espresso, Latte, Mocha
8. Atilẹyin ọja ati Onibara Support
For warranty information, please refer to the documentation provided with your purchase or visit the official HIBREW website. If you require technical assistance or have questions not covered in this manual, please contact HIBREW customer support through their official channels.





