JABLOTRON™ Nanny Monitor BM-02 Babyphone User Manual

1. Ifihan

Thank you for choosing the JABLOTRON™ Nanny Monitor BM-02. This device is designed to monitor your baby's breathing movements and provide an early warning in case of irregularities. It is a certified medical device, offering peace of mind for parents. This manual provides essential information for the safe and effective use of your Nanny Monitor BM-02.

Nọmba 1: The product packaging for the JABLOTRON Nanny Monitor BM-02, highlighting its certification as a medical device, early warning capabilities, and ease of operation.

2. Alaye Aabo pataki

• Ka gbogbo awọn ilana: Before using the Nanny Monitor BM-02, carefully read and understand all instructions in this manual.
• Not a medical device for diagnosis: This monitor is a breathing movement detector and is not intended to diagnose, treat, or cure any medical condition or disease. It is an aid for parents and caregivers.
• Professional medical advice: Always consult with a healthcare professional for any concerns regarding your baby's health.
• Ibi ti o yẹ: Ensure the sensor mat is placed correctly under the mattress and the main unit is securely attached to the crib, out of reach of the child.
• Awọn kebulu: Keep all cables and cords away from the baby's reach to prevent strangulation hazards.
• Orisun agbara: Lo oluyipada agbara nikan ti a pese pẹlu ẹrọ naa.
• Awọn ipo ayika: Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju, imọlẹ orun taara, tabi ọrinrin pupọ.
• Ninu: Clean the device only as instructed in the maintenance section.
• Abojuto: The Nanny Monitor BM-02 is an aid and does not replace direct adult supervision of the child.

3. Package Awọn akoonu

Jọwọ ṣayẹwo akoonu inu apoti naa lati rii daju pe gbogbo awọn ohun kan wa nibẹ ati pe ko bajẹ:

• JABLOTRON Nanny Monitor BM-02 Main Unit
• Sensor Mat (1x)
• Adapter agbara
• Itọsọna olumulo
• Decorative Stickers (optional, for personalization)
• Antibacterial Tissues (for cleaning)

Nọmba 2: An oke view of all items included in the JABLOTRON Nanny Monitor BM-02 package, including the main unit, sensor mat, power adapter, and documentation.

4. Eto Itọsọna

Follow these steps to set up your Nanny Monitor BM-02:

1. Yan Ibi: Select a stable and flat surface for the crib or bed where the baby will sleep.
2. Place Sensor Mat: Carefully place the sensor mat directly on the solid base of the crib, under the mattress. Ensure the mat is flat and centered where the baby will lie.


Nọmba 3: The sensor mat of the JABLOTRON Nanny Monitor BM-02 correctly positioned underneath a baby's crib mattress.

3. So Ẹrọ Akọkọ pọ: Connect the cable from the sensor mat to the main Nanny Monitor BM-02 unit. Ensure the connection is secure.
4. Position Main Unit: Attach the main unit to the side of the crib using the integrated hanger, ensuring it is firmly secured and out of the baby's reach. Alternatively, place it on a stable surface near the crib.


Nọmba 4: The JABLOTRON Nanny Monitor BM-02 main unit securely attached to the side of a baby crib.

5. Agbara Tan: Plug the power adapter into the main unit and then into a wall outlet. The device will perform a self-test, indicated by flashing lights.
6. Idanwo Ibẹrẹ: After powering on, place your hand on the mattress above the sensor mat and gently tap or press to simulate breathing movements. The green indicator light should illuminate, confirming detection.

5. Awọn ilana Iṣiṣẹ

The Nanny Monitor BM-02 is designed for simple operation. Once set up, it continuously monitors your baby's breathing movements.

Awọn imọlẹ Atọka:

• Green Light (Smiling Face): Indicates normal breathing movements are detected. This light will flash with each detected movement.
• Orange Light (Neutral Face): May indicate a weak signal or a need to check the sensor mat placement. Refer to troubleshooting if this persists.
• Red Light (Sad Face) & Audible Alarm: Activates if no breathing movement is detected for 20 seconds. This is a critical warning.
• Battery Indicator (Bottom Icon): Illuminates or flashes to indicate low battery power. Replace batteries promptly if applicable, or ensure power adapter is connected.

Nọmba 5: The JABLOTRON Nanny Monitor BM-02 main monitoring unit, showing the indicator lights.

Idahun Itaniji:

If the red light and audible alarm activate:

1. Immediately check on your baby.
2. If the baby is unresponsive, follow your pediatrician's instructions for emergency situations.
3. If the baby is fine, check the sensor mat placement and ensure no external vibrations are interfering with the monitor.

6. Itọju

Ninu:

• Nigbagbogbo ge asopọ ohun ti nmu badọgba agbara ṣaaju ṣiṣe mimọ.
• Wipe the main unit and sensor mat with a soft, damp cloth. You may use the provided antibacterial tissues.
• Ma ṣe lo awọn afọmọ abrasive, nkanmimu, tabi awọn kẹmika lile.
• Ensure the device is completely dry before reconnecting to power.

Rirọpo Batiri:

The Nanny Monitor BM-02 uses alkaline batteries (if not solely powered by adapter). When the battery indicator illuminates or flashes, replace the batteries immediately to ensure continuous operation. Refer to the battery compartment for specific battery type and replacement instructions.

7. Laasigbotitusita

8. Imọ ni pato

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official JABLOTRON webojula tabi kan si wọn onibara iṣẹ taara. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

JABLOTRON Official Webojula: www.jablotron.com (Please verify the exact support URL on the product packaging or official documentation).