Parkside PAS D5 4V Cordless Screwdriver User Manual

1. Ifihan ati Ọja Loriview

The Parkside PAS D5 4V Cordless Screwdriver is a versatile tool designed for various screwing and light cutting tasks. It features a compact design and comes with a range of interchangeable attachments to suit different applications.

This screwdriver is equipped with four specialized attachments:

• Torque Attachment: Features adjustable output torque, making it ideal for precise work with small screws and delicate materials.
• Eccentric Attachment: Designed for working in confined spaces and close to edges.
• Angle Attachment: Allows access to hard-to-reach areas and corners.
• Asomọ gige: Suitable for cutting soft materials such as cardboard, textiles, leather, or other flexible materials.

This image displays the Parkside PAS D5 cordless screwdriver alongside its versatile attachments, including a torque attachment for precision, an eccentric attachment for tight spaces, an angle attachment for corners, and a cutting attachment for soft materials.

2. Awọn ilana aabo

Always observe the following safety precautions when using the cordless screwdriver to prevent electric shock, fire, and serious injury.

• Ka iwe afọwọkọ naa: Familiarize yourself with all instructions and warnings before operating the tool.
• Idaabobo Oju: Always wear appropriate eye protection, such as safety goggles, to protect against flying debris.
• Agbegbe Iṣẹ: Jeki agbegbe iṣẹ rẹ mọ ki o si tan daradara. Awọn agbegbe idamu tabi awọn agbegbe dudu n pe awọn ijamba.
• Ayika: Ma ṣe ṣiṣẹ awọn irinṣẹ agbara ni awọn bugbamu bugbamu, gẹgẹbi niwaju awọn olomi ina, gaasi, tabi eruku.
• Awọn ọmọde ati Awọn Oluduro: Pa awọn ọmọde ati awọn alafojusi kuro lakoko ti o nṣiṣẹ ohun elo agbara kan. Awọn idamu le fa ki o padanu iṣakoso.
• Yiyan Bit Ti o tọ: Use the correct bit or attachment for the specific task. Incorrect accessories can lead to damage or injury.
• Ge Agbara: Always disconnect the tool from its power source (e.g., remove the battery or unplug the charging cable) before making any adjustments, changing accessories, or storing the tool.
• Iṣẹ iṣẹ to ni aabo: Ṣe aabo awọn workpiece pẹlu clamps or a vise. Holding it by hand is unstable and can lead to loss of control.
• Yago fun Iwaju: Ṣe itọju ẹsẹ to dara ati iwọntunwọnsi ni gbogbo igba. Ma ṣe bori.
• Tọju lailewu: Tọju awọn irinṣẹ agbara laišišẹ ni arọwọto awọn ọmọde ati ma ṣe gba awọn eniyan ti ko mọ pẹlu ohun elo agbara tabi awọn ilana wọnyi lati ṣiṣẹ ohun elo agbara naa.

3. Package Awọn akoonu

Upon unpacking, ensure all items listed below are present and in good condition:

• Parkside PAS D5 4V Cordless Screwdriver
• 1x Torque Attachment
• 1x Eccentric Attachment
• 1x Angle Attachment
• 1x Cutting Attachment
• 26x Screwdriver Bits (25 mm)
• 2x Screwdriver Bits (50 mm)
• 1x Bit Extension
• 1x USB Ngba agbara USB
• Ọran gbigbe

A sunmọ-soke view of the comprehensive bit set provided with the screwdriver, featuring multiple sizes and head types (flat, Phillips, Torx, Pozidriv) for diverse screwing applications.

4. Awọn ẹya Ọja

The Parkside PAS D5 Cordless Screwdriver incorporates several features for enhanced usability and performance:

• Dimu Bit oofa: Equipped with a hexagonal socket for secure and quick bit changes.
• Automatic Spindle Lock: Allows for manual screwing when additional torque is needed or for initial tightening/loosening.
• Integrated LED Work Lights: Illuminates the workpiece for improved visibility in dimly lit areas.
• Rotation Indicator: LEDs indicate the selected rotation direction (right/left).
• Low Battery Charge Indicator: Pese esi wiwo lori ipo batiri.
• Non-slip Softgrip: Ergonomic design with a softgrip surface for comfortable and secure handling.
• Ngba agbara USB: Convenient charging via the included USB cable.

5. Eto

5.1 Gbigba agbara akọkọ

1. So okun gbigba agbara USB pọ mọ ibudo gbigba agbara lori screwdriver naa.
2. Plug the other end of the USB cable into a suitable USB power adapter (not included) or a powered USB port.
3. Allow the screwdriver to charge for approximately 60 minutes for a full charge. The battery indicator LEDs will show the charging status.
4. Ge asopọ okun gbigba agbara ni kete ti o ti gba agbara ni kikun.

5.2 Attaching Bits and Attachments

1. Ensure the screwdriver is turned off and disconnected from any charging source.
2. To insert a screwdriver bit: Push the desired bit firmly into the magnetic bit holder until it clicks into place.
3. To attach an accessory head (torque, eccentric, angle, cutting): Align the accessory head with the screwdriver's main shaft and push it on until it locks securely. Ensure it is fully seated to prevent detachment during operation.
4. To remove a bit or attachment: Pull the bit or attachment straight out from the holder/shaft.

6. Awọn ilana Iṣiṣẹ

6.1 Powering On/Off and Rotation Direction

• The screwdriver is activated by pressing the trigger switch.
• To select the rotation direction (forward for screwing, reverse for unscrewing), use the direction selector switch, typically located near the trigger. An LED indicator will confirm the selected direction.
• Release the trigger switch to turn off the screwdriver.

6.2 Lilo Awọn Asomọ

• Torque Attachment: Adjust the torque setting ring to the desired level before screwing. This prevents overtightening and damage to delicate materials or screws.
• Eccentric Attachment: Use this attachment when working very close to an edge or in tight corners where the main body of the screwdriver would obstruct access.
• Angle Attachment: Ideal for reaching screws located at a 90-degree angle to the tool's body, such as inside cabinets or furniture.
• Asomọ gige: Ensure the material to be cut is soft and within the attachment's capabilities. Guide the tool steadily along the cutting line.

6.3 Manual Screwing

The automatic spindle lock allows for manual tightening or loosening of screws. If the motor stops or you need extra force, you can manually turn the screwdriver to complete the task.

6.4 Imọlẹ Ise LED

The integrated LED work light automatically illuminates when the trigger is pressed, providing visibility in poorly lit work areas.

This composite image illustrates the practical applications of the Parkside PAS D5. It shows the angle attachment reaching into a cabinet, the cutting attachment effortlessly slicing cardboard, the eccentric attachment working near an edge, and the torque attachment being used for precise screwing on a small object.

7. Itọju

7.1 Ninu

• Always disconnect the tool from the charging cable before cleaning.
• Fi asọ rirọ nu ita ohun elo naaamp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
• Jeki awọn ṣiṣi atẹgun kuro ninu eruku ati idoti lati yago fun igbona.

7.2 Itọju Batiri ati Ibi ipamọ

• Store the screwdriver in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, ensure the battery is partially charged (around 50%) to prolong its lifespan. Avoid storing with a completely depleted or fully charged battery for extended periods.
• Ma ṣe fi batiri han si omi tabi ina.

8. Laasigbotitusita

If you encounter issues with your Parkside PAS D5 screwdriver, refer to the following common troubleshooting steps:

• Irinṣẹ Ko Tii:
  • Check if the battery is sufficiently charged. Recharge if necessary.
  • Ensure the direction selector switch is not in the neutral (locked) position.
• Reduced Performance/Weak Screwing:
  • The battery might be low. Recharge the tool.
  • The bit might be worn or incorrect for the screw type. Replace with a new, appropriate bit.
  • For the torque attachment, ensure the torque setting is appropriate for the task.
• Bit or Attachment Falls Out:
  • Ensure the bit or attachment is fully inserted and locked into place.
  • Inspect the bit holder or attachment mechanism for damage.
• Igbóná púpọ̀:
  • Gba ohun elo naa laaye lati tutu.
  • Rii daju pe awọn iho atẹgun ko ni dina.
  • Yago fun lilo iṣẹ-eru lemọlemọ laisi awọn isinmi.

Tí ìṣòro náà bá ń bá a lọ lẹ́yìn tí a bá ti gbìyànjú àwọn ìgbésẹ̀ wọ̀nyí, jọ̀wọ́ kan sí ìrànlọ́wọ́ oníbàárà.

9. Awọn pato

10. Atilẹyin ọja ati Support

This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, spare parts, or warranty claims, please contact the retailer where you purchased the product or refer to the contact information provided by the manufacturer, Crivit, in your product documentation.

Please have your proof of purchase and the product model number (PAS D5 / 58DPAS) available when contacting support.