Ọrọ Iṣaaju
The THIRDREALITY Zigbee 3.0 USBC-Dongle is a versatile USB stick designed to facilitate smart home automation by providing Zigbee connectivity. It is compatible with popular platforms such as Zigbee2Mqtt (Z2M) and Zigbee Home Automation (ZHA), allowing seamless integration with a wide range of Zigbee 3.0 end devices including smart switches, blinds, and sensors. This manual provides detailed instructions for setting up, operating, and maintaining your Zigbee USBC-Dongle.
Image: The THIRDREALITY Zigbee 3.0 USBC-Dongle shown with its included USB-A adapter, highlighting its compact design and dual compatibility.
Ohun ti o wa ninu Apoti
Jọwọ ṣayẹwo awọn akoonu package lati rii daju pe gbogbo awọn ohun kan wa:
- Zigbee 3.0 USBC-DONGLE x 1
- Afọwọṣe x 1 (Iwe-iwe yii)
- USBA Adaptor x 1
- PIN x 1
Image: A visual representation of the package contents, including the Zigbee USBC-Dongle, USB-A adapter, quick start guide, and a pin.
Ọja Pariview
The Zigbee USBC-Dongle features a compact design with essential components for reliable Zigbee communication.
Aworan: inu view of the Zigbee USBC-Dongle's PCB, showing key components such as the Boot and Reset button, RGB LED, PCB Antenna, Type-C Connector, and Type-C to Type-A Convertor.
- Boot and Reset button: Used for device reset and firmware burning.
- RGB LED: Indicates device status and activity.
- PCB Antenna: Integrated antenna for Zigbee signal transmission and reception.
- Asopọ Iru-C: Primary USB-C interface for connection.
- Type-C to Type-A Convertor: Gba asopọ laaye si awọn ibudo USB-A boṣewa.
Awọn pato
Detailed technical specifications for the THIRDREALITY Zigbee 3.0 USBC-Dongle:
Image: A graphic detailing the specifications of the Zigbee USBC-Dongle, including dimensions and key technical data.
| Iwa | Iye |
|---|---|
| Brand | KẸTA |
| Awoṣe No. | 3RZD02032Z |
| Ọja Mefa | 60 x 20 x 9 mm (2.36 x 0.79 x 0.35 inches) |
| Iwọn Nkan | 1.13 iwon (0.03 kilo) |
| Ohun elo | Plastics, PCBA |
| Agbara | 300mW |
| Awọn iwọn otutu ṣiṣẹ | 0°C – 40°C |
| Igbohunsafẹfẹ RF | 2405 - 2480 MHz |
| Ilana Alailowaya | Zigbee 3.0 |
| Ni wiwo Hardware | USB 2.0 |
| Àwọ̀ | Funfun |
| UPC | 850001595735 |
Key Awọn ẹya ara ẹrọ
Image: A graphic highlighting the main features of the Zigbee USBC-Dongle, including port support, compatibility, range, and installation simplicity.
- Ibamu Platform: Designed to be compatible with Zigbee2Mqtt (Z2M) and Home Assistant (Zigbee Home Automation).
- Zigbee 3.0 Compatibility: Supports standard Zigbee 3.0 end devices from various brands, including smart switches, smart blinds, and smart sensors.
- Installation Simplicity: Plug-and-play functionality for easy setup. Simply insert the dongle into a compatible USB port.
- Dual USB Support: Includes support for both USB-A and USB-C connections, enhancing compatibility across various devices.
- Atilẹyin Igbesoke Famuwia: Supports burning of equipment and factory reset (refer to advanced sections for details).
- Stable Range: Offers a communication distance of up to 30 meters.
Eto & Fifi sori
The THIRDREALITY Zigbee USBC-Dongle is designed for straightforward installation. Follow these steps to get started:
- So Dongle pọ:
Insert the Zigbee USBC-Dongle directly into a USB-C port on your computer or Raspberry Pi. If your device only has USB-A ports, use the included USB-A adapter.
Video: Demonstrates connecting the THIRDREALITY Zigbee USBC-Dongle to a computer and a Raspberry Pi, showing the blue indicator light upon successful connection.
- Software Configuration (Home Assistant):
The dongle is primarily used with Home Assistant for smart home integration. Depending on your setup, you will configure it for either Zigbee Home Automation (ZHA) or Zigbee2Mqtt (Z2M).
For ZHA (Zigbee Home Automation):
- Lilö kiri si Eto > Devices & Services in Home Assistant.
- Look for the discovered "Radio Browser" or "Zigbee Home Automation" integration.
- Configure the integration by selecting the correct serial device path for your dongle (e.g.,
/dev/ttyUSB0). - Tẹle awọn ilana loju iboju lati pari iṣeto naa.
For Z2M (Zigbee2MQTT):
- Ensure the Zigbee2MQTT add-on is installed and running in Home Assistant.
- Access the Zigbee2MQTT add-on configuration.
- Locate the 'serial' section in the configuration and specify the correct port for your dongle (e.g.,
port: /dev/ttyUSB0). - Save the configuration and restart the Zigbee2MQTT add-on.
Image: An illustrative diagram showing how the Zigbee USBC-Dongle acts as a central hub in a smart home chain, connecting various Zigbee devices like smart buttons, sensors, switches, plugs, lights, and blinds. Note: A Home Assistant System is required for this setup.
Awọn ilana Iṣiṣẹ
Once successfully configured with your chosen smart home platform (ZHA or Z2M), the Zigbee USBC-Dongle operates as the coordinator for your Zigbee network. It enables communication between your smart home hub and all paired Zigbee end devices.
- Ohun elo Pipọ: Refer to your smart home platform's documentation (Home Assistant, Zigbee2Mqtt) for specific instructions on how to pair new Zigbee devices with the dongle. Typically, this involves enabling pairing mode on the dongle via the software interface and then activating pairing mode on the Zigbee end device.
- Isakoso nẹtiwọki: Your smart home platform will provide tools to manage your Zigbee network, including viewing connected devices, checking signal strength, and performing network repairs if needed.
- Adaṣe: Utilize your smart home platform's automation features to create routines and scenes involving your Zigbee devices.
Itoju
The THIRDREALITY Zigbee USBC-Dongle requires minimal maintenance to ensure optimal performance:
- Jeki mimọ: Wipe the dongle with a dry, soft cloth to remove dust. Avoid using liquid cleaners.
- Awọn ipo Ayika: Operate the dongle within its specified temperature range (0°C – 40°C) and avoid excessively humid environments.
- Awọn imudojuiwọn famuwia: Periodically check the THIRDREALITY website or your smart home platform's community forums for any available firmware updates for the dongle. Updates can improve performance, add features, or address bugs.
Laasigbotitusita
If you encounter issues with your Zigbee USBC-Dongle, try the following troubleshooting steps:
| Isoro | Owun to le Solusan |
|---|---|
| Dongle not recognized by computer/Raspberry Pi. |
|
| Zigbee devices not pairing. |
|
| Poor Zigbee signal or dropped devices. |
|
| Dongle LED not lighting up. |
|
Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official THIRDREALITY website or contact their customer service directly. You can also find additional resources and community support through the Home Assistant and Zigbee2Mqtt forums.
A PDF version of the user guide may also be available for download:
Ṣe igbasilẹ Itọsọna olumulo (PDF)
For direct assistance, please contact Third Reality, Inc., the seller of this product.
