Ọrọ Iṣaaju
This Vantrue Wireless Remote Control is designed to enhance your driving safety and convenience by providing quick access to essential dash cam functions without diverting your attention from the road. With a simple press, you can lock emergency moments, capture snapshots of beautiful scenery, or discreetly turn off audio recording.
Its compact design and easy installation make it a seamless addition to your vehicle's interior, ensuring critical moments are captured and managed efficiently.
Ohun ti o wa ninu Apoti
- Alailowaya isakoṣo latọna jijin
- 3M alemora Sitika
- Itọsọna olumulo
Ibamu
This remote control is compatible with a range of Vantrue dash cam models, ensuring broad usability for Vantrue users.
Awọn awoṣe ibaramu:
- Vantrue E1 Pro
- Vantrue E1
- Vantrue E2
- Vantrue E3
- Vantrue E360/ACE
- Vantrue N4 Pro
- Vantrue N5
- Vantrue N2X
- Vantrue S1 Pro
Note: This remote control is not compatible with other Vantrue dash cam models not listed above.
Figure 1: Visual guide to compatible Vantrue dash cam models.
Key Awọn ẹya ara ẹrọ
- Event Locking: Instantly lock important video segments to prevent them from being overwritten.
- Snapshot Function: Capture still images with a single press.
- Audio ON/OFF Control: Easily toggle audio recording for privacy or compliance.
- Asopọ Alailowaya: Connects automatically to your Vantrue dash cam via WiFi.
- Ibi ti o gbooro sii: Operates effectively up to 9.8 feet (3 meters) from the dash cam.
- Apẹrẹ Iwapọ: Small and discreet, measuring approximately 1.18 x 0.39 x 1.49 inches.
- Fifi sori Rọrun: Features 3M adhesive for secure mounting on various surfaces.
Figure 2: The Vantrue Wireless Remote Control, highlighting its compact design.
Figure 3: Illustration of the remote control's effective range and physical dimensions.
Ṣeto
1. Fifi sori batiri
The remote control requires one 12V battery for operation. Ensure the battery is correctly inserted according to the polarity markings inside the battery compartment. A plastic tab may need to be removed to activate the battery upon first use.
2. Mounting the Remote Control
The remote control comes with a 3M adhesive sticker for easy and secure mounting. Choose a flat surface on your dashboard, steering wheel, console, or any other convenient location within reach while driving.
- Clean the chosen surface thoroughly to ensure it is free of dust and grease.
- Peel off the protective film from one side of the 3M adhesive sticker and apply it firmly to the back of the remote control.
- Peel off the protective film from the other side of the 3M adhesive sticker.
- Press the remote control firmly onto the desired surface in your vehicle for at least 30 seconds to ensure strong adhesion.
Figure 4: Visual representation of the remote control's functions and suggested installation locations.
3. Pairing with Dash Cam
The remote control is designed to automatically connect to your compatible Vantrue dash cam via WiFi. No manual pairing process is typically required. Once the dash cam is powered on and the remote control has a working battery, they should establish a connection within split-seconds.
If the remote does not connect, ensure your dash cam's WiFi is enabled and that the remote is within the 9.8ft operating range. Rebooting the dash cam may also help establish the connection.
Awọn ilana Iṣiṣẹ
The Vantrue Wireless Remote Control provides intuitive one-touch operation for key dash cam functions.
- Event Locking / Snapshot: Press the button with the triangular exclamation point icon (or the camera icon, depending on model/function) to instantly lock the current video segment or take a photo. This ensures important footage is saved and not overwritten during loop recording.
- Audio ON/OFF: Press the button with the microphone icon to toggle the audio recording function. This allows you to quickly turn off audio for privacy or to comply with local regulations.
These functions are designed to be accessible with minimal distraction, allowing you to keep your eyes on the road while managing your dash cam.
Itoju
- Ninu: Use a soft, dry cloth to clean the remote control. Avoid using harsh chemicals or abrasive materials that could damage the surface or buttons.
- Rirọpo Batiri: When the remote control's indicator light dims or it becomes unresponsive, it's time to replace the 12V battery. Carefully open the battery compartment, replace the old battery with a new one, ensuring correct polarity, and close the compartment securely.
- Ibi ipamọ: If storing the remote control for an extended period, remove the battery to prevent leakage and potential damage to the device. Store in a cool, dry place.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Isakoṣo latọna jijin ko dahun. | Kekere tabi okú batiri. | Rọpo batiri 12V naa. |
| Isakoṣo latọna jijin ko dahun. | Kosi ibiti o wa. | Ensure the remote is within 9.8ft (3 meters) of the dash cam. |
| Isakoṣo latọna jijin ko dahun. | Dash cam WiFi is off or not functioning. | Check dash cam settings to ensure WiFi is enabled. Reboot the dash cam. |
| Functions (snapshot, audio) not activating. | Ọrọ ibamu. | Verify your dash cam model is listed under the "Compatibility" section. |
Awọn pato
- Awoṣe: Multi6
- Awọn iwọn: 1.18 x 0.39 x 1.49 inches (isunmọ.)
- Ìwúwo: 0.48 iwon
- Orisun Agbara: 1 x 12V battery (required)
- Asopọmọra: WiFi
- Ijinna Iṣakoso: Titi de 9.8 ẹsẹ (3 mita)
- Awọn ẹya pataki: Event Locking, Snapshot, Audio ON/OFF Function
- Àwọ̀: Dudu
Atilẹyin ọja & Atilẹyin
VANTRUE is committed to providing high-quality products and excellent customer service.
- Atilẹyin ọja ti o gbooro sii: Enjoy an 18-month extended warranty on your product.
- Ilana Pada: A 30-day return policy is available for your peace of mind.
- Atilẹyin Onibara: Dedicated 24-hour customer support is available to assist you with any inquiries or issues.
Ibi iwifunni:
- Imeeli: support@vantrue.net
- Foonu: 510-666-4086
Olusin 5: Pariview of Vantrue's customer support and warranty details.
