Ìwé Ìtọ́sọ́nà Olùlò Títà Ranger DST-2420

1. Ifihan

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of the Ranger DST-2420 Tire Balancer. The DST-2420 is designed for accurate wheel balancing, featuring Digital Sensor Technology and a Direct-Axis drive system to ensure precise, vibration-free wheel balancing for various vehicle types.

Please read this manual thoroughly before operating the equipment. Retain this manual for future reference.

2. Alaye Aabo

WARNING: Failure to follow these safety instructions may result in serious injury or equipment damage.

• Nigbagbogbo wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE), pẹlu awọn gilaasi aabo ati awọn ibọwọ.
• Ensure the balancer is installed on a level, stable surface capable of supporting its weight and the weight of the wheel being balanced.
• Ge asopọ agbara ṣaaju ṣiṣe eyikeyi itọju tabi iṣẹ.
• Jeki ọwọ, irun, ati aṣọ alaimuṣinṣin kuro lati awọn ẹya gbigbe lakoko iṣẹ.
• Do not operate the balancer if any parts are damaged or missing.
• Àwọn òṣìṣẹ́ tí wọ́n ti kọ́ ẹ̀kọ́ àti àwọn tí wọ́n ní àṣẹ nìkan ló yẹ kí wọ́n ṣiṣẹ́ ohun èlò yìí.
• Jẹ ki agbegbe iṣẹ jẹ mimọ ati itanna daradara.

3. Ọja irinše ati Awọn ẹya ara ẹrọ

The Ranger DST-2420 Tire Balancer includes the following key components and features:

• Ibi iwaju alabujuto: Digital display and input buttons for operation.
• Wheel Shaft: 40mm shaft for mounting wheels.
• Mounting Cone Package: Various cones to accommodate different wheel hub sizes.
• Tape Weight Feeder: Dispenser for adhesive wheel weights.
• Wheel Weight Starter Kit: Initial supply of wheel weights.
• Multi-directional Quartz Piezoelectric Load Sensors: For precise weight measurement.
• Direct-Axis Drive System: Ensures accurate and repeatable balancing.
• Hood Idaabobo: Covers the wheel during rotation for safety.

Olusin 3.1: Pariview of the Ranger DST-2420 Tire Balancer with a wheel mounted.

Figure 3.2: Close-up of the control panel and integrated storage trays for wheel weights.

Figure 3.3: Detail of the tape weight feeder, designed for convenient access to adhesive weights.

Figure 3.4: Integrated storage rack for various mounting cones and accessories.

4. Eto ati fifi sori

1. Ṣii silẹ: Carefully remove the balancer from its packaging. Inspect for any shipping damage.
2. Ibi: Position the balancer on a solid, level concrete floor. Ensure adequate space around the machine for safe operation and maintenance.
3. Diduro: Secure the balancer to the floor using appropriate anchor bolts (not included) to prevent movement during operation.
4. Asopọ agbara: Connect the balancer to a dedicated electrical circuit as specified in the electrical requirements section (refer to specifications). Ensure the power supply matches the machine's requirements.
5. Iṣatunṣe akọkọ: Perform the initial calibration procedure as outlined in the separate calibration guide (if provided) or the on-screen prompts.

olusin 4.1: Apa view of the balancer, illustrating its compact footprint for placement.

5. Awọn ilana Iṣiṣẹ

1. Fifi Kẹ̀kẹ́ Sílẹ̀:
   • Select the correct mounting cone for the wheel's center bore.
   • Place the wheel onto the 40mm shaft, ensuring it is centered and snug against the cone.
   • Secure the wheel with the quick-release wing nut or appropriate clampohun elo.
2. Inputting Wheel Data:
   • Manually input the wheel's diameter, width, and offset using the control panel buttons.
   • Verify the entered data on the digital display.
3. Starting the Balance Cycle:
   • Lower the protective hood.
   • Press the "START" button on the control panel. The machine will rotate the wheel to measure imbalance.
4. Applying Wheel Weights:
   • Once the cycle is complete, the display will indicate the required weight amount and location for both inner and outer planes.
   • Yi kẹkẹ naa pada pẹlu ọwọ si ipo ti a fihan fun gbigbe iwuwo.
   • Select the appropriate weight from the wheel weight starter kit or tape weight feeder.
   • Apply the weight to the designated area on the wheel rim.
5. Re-checking Balance:
   • Repeat the balance cycle by pressing "START" to confirm the wheel is balanced.
   • Adjust weights as necessary until the display shows zero or minimal imbalance.
6. Removing the Wheel:
   • Raise the protective hood.
   • Loosen the quick-release wing nut and carefully remove the balanced wheel from the shaft.

6. Itọju

Regular maintenance ensures the longevity and accuracy of your Ranger DST-2420 Tire Balancer.

• Ojoojumọ:
  • Clean the machine, especially the shaft and mounting surfaces, to remove dirt and debris.
  • Ṣayẹwo okun agbara fun eyikeyi ibajẹ.
• Osẹ-ọsẹ:
  • Ṣayẹwo gbogbo fasteners fun wiwọ.
  • Inspect the protective hood for cracks or damage.
• Oṣooṣu:
  • Perform a calibration check using a known good test wheel.
  • Lubricate moving parts as specified in the detailed service manual (if applicable).
• Ọdọọdún:
  • Jẹ́ kí onímọ̀ iṣẹ́ tó péye ṣe àyẹ̀wò ẹ̀rọ náà.

CAUTION: Always disconnect power before performing any maintenance.

7. Laasigbotitusita

8. Awọn pato

9. atilẹyin ọja Information

Specific warranty details for the Ranger DST-2420 Tire Balancer are provided by the manufacturer, Bendpak. Please refer to the warranty card included with your product or visit the official Ranger/Bendpak website for the most current and comprehensive warranty policy. Keep your proof of purchase for warranty claims.

10. Onibara Support

For technical assistance, parts, or service inquiries regarding your Ranger DST-2420 Tire Balancer, please contact Bendpak customer support.

Olupese: Bendpak

Jọwọ ṣabẹwo si osise naa Ranger Store on Amazon or the Bendpak corporate webaaye fun alaye olubasọrọ ati awọn orisun atilẹyin.