Anern ECO-4200 4200W 24V Hybrid Solar Inverter User Manual

1. Ifihan

This manual provides comprehensive instructions for the safe and efficient operation of your Anern ECO-4200 4200W 24V Hybrid Solar Inverter. This all-in-one unit combines the functions of an inverter, solar charger, and battery charger to provide uninterrupted power support. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Alaye Aabo

IKILO: Ikuna lati tele awọn ilana aabo wọnyi le ja si mọnamọna, ina, tabi ipalara nla.

• Fifi sori gbọdọ wa ni ošišẹ ti nipasẹ oṣiṣẹ eniyan.
• Rii daju pe gbogbo onirin ni ibamu pẹlu awọn koodu itanna agbegbe ati ti orilẹ-ede.
• Ma ṣe tuka oluyipada. Ko si awọn ẹya ti olumulo-iṣẹ ninu.
• Disconnect all power sources (PV array, battery, utility) before performing any maintenance or wiring.
• This inverter is designed for 220V/230V AC output. It does not support 110V/120V AC output directly or parallel operation. For 110V/120V appliances, an external step-down converter (not included) is required.
• Rii daju pe fentilesonu to dara ni ayika ẹrọ oluyipada lati ṣe idiwọ igbona.
• Avoid installing the inverter in direct sunlight, high humidity, or dusty environments.

3. Awọn ẹya Ọja

The Anern ECO-4200 Hybrid Solar Inverter offers advanced functionalities for reliable power management:

• Ijade Sine Wave Pure: Pese agbara AC ti o ni agbara giga ti o dara fun ẹrọ itanna ifura.
• Olùdarí Àkójọpọ̀ Àkójọpọ̀ MPPT: Features a 120A Maximum Power Point Tracking (MPPT) solar charge controller for efficient solar energy harvesting.
• Eto atunto: LCD display allows configuration of input voltage range for home appliances or personal computers, battery charging current, and AC/solar charger priority.
• Versatile Power Source Compatibility: Ni ibamu pẹlu awọn ohun elo agbara tabi agbara jenerọ.
• Atunbẹrẹ aifọwọyi: A maa tun bẹrẹ laifọwọyi nigbati agbara AC ba ti pada.
• Aabo ti o ni kikun: Includes overload, over-temperature, and short-circuit protection.
• Ṣaja Batiri Smart: Designed to optimize battery performance and extend lifespan.
• Išẹ Ibẹrẹ tutu: Enables the inverter to start without an AC input.
• Ìjáde AC Meji: Features a primary output of 4200W and a secondary output of 1400W. The secondary output can maintain power during low battery or no mains conditions to save energy.
• Ibamu Batiri: Supports various battery types including GEL, FLD, Li-on (Lithium), and AGM.
• Abojuto Wi-Fi: Allows control and monitoring of the system via a mobile application.

Aworan: Pariview of the Anern ECO-4200 inverter highlighting multiple protection features, Wi-Fi monitoring capability, and its ability to operate with or without a battery.

4. fifi sori

This section outlines the basic system architecture and wiring for the Anern ECO-4200 Hybrid Solar Inverter. Consult a qualified system integrator for specific requirements.

4.1 Ipilẹ System Architecture

The inverter/charger forms the core of your solar power system. A complete operational system typically includes:

• The Anern ECO-4200 Hybrid Solar Inverter
• PV Modules (Solar Panels)
• Battery Bank (e.g., 48V lead-acid or lithium battery)
• Utility Grid or Generator (as an optional AC input source)

4.2 Wiring aworan atọka

Refer to the diagram below for a typical wiring configuration. Ensure all connections are secure and correctly polarized.

Image: Detailed wiring diagram illustrating connections for photovoltaic panels, battery bank, AC input from utility or generator, and AC output to household loads. Recommended wire gauges and fuse sizes are indicated.

Key Wiring Recommendations:

• Photovoltaic (PV) Input: Max ìmọ Circuit voltage 500VDC. MPPT PV voltage range 90VDC-450VDC. Suggested wire: 10 AWG/6mm². Connect panels in series.
• Asopọ batiri: For a 48V battery system, use 2 AWG cable (25mm²) and a 150A fuse.
• Iṣawọle AC: Max AC igbewọle voltage 300VAC. Max AC charging current 160A. Suggested cable: 10 AWG/6mm². Recommended switch: 63A.
• Ijade AC: Rated output 220V/230V. Suggested cable: 10 AWG/6mm². Recommended switch: 63A.

Important Note: The inverter output is 230V. A separate converter (not included) is required for 110V appliances.

5. Awọn ilana Iṣiṣẹ

The inverter features an LCD display for monitoring and configuring operational parameters.

5.1 Configurable Settings via LCD

You can adjust various settings to suit your application requirements:

• Iṣagbewọle Voltage Ibiti: Select between appliance mode or personal computer mode.
• Ngba agbara Batiri lọwọlọwọ: Adjust the charging current based on your battery specifications.
• Charger Priority: Set the priority for AC charger or solar charger.

5.2 Charge Modes

The inverter supports four distinct charge modes:

1. Oòrùn Àkọ́kọ́: Prioritizes solar power for charging.
2. Àkọ́kọ́ Ohun Èlò: Prioritizes utility power for charging.
3. Oorun ati Ohun elo: Uses both solar and utility power for charging.
4. Battery and Solar: Charges from both battery and solar (specific to certain configurations).

5.3 Awọn ọna Ijade

Three output modes are available to manage power distribution:

1. Iyanju Oorun: Prioritizes solar power for loads.
2. Àkọ́kọ́ Ohun Èlò: Prioritizes utility power for loads.
3. SBU Mode (Solar-Battery-Utility): Prioritizes solar, then battery, then utility for loads.

The inverter can power various household and office appliances, including refrigerators, lamps, fans, and air conditioners.

Image: The Anern ECO-4200 inverter demonstrating compatibility with a wide range of household and office appliances, including coffee makers, toasters, and kettles.

6. Itọju

Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti oluyipada rẹ.

• Ninu: Jẹ́ kí ìta inverter náà mọ́ tónítóní kí ó sì wà láìsí eruku. Lo aṣọ gbígbẹ. Má ṣe lo àwọn ohun ìfọmọ́ omi.
• Afẹfẹ: Ensure ventilation openings are clear and unobstructed. The intelligent variable speed fan helps dissipate heat efficiently.
• Awọn isopọ: Lokọọkan ṣayẹwo gbogbo awọn asopọ itanna fun wiwọ ati awọn ami ti ibajẹ.
• Ayika: Maintain the inverter in a cool, dry, and well-ventilated area.

7. Laasigbotitusita

Apá yìí fúnni ní ìtọ́sọ́nà fún àwọn ọ̀ràn tó wọ́pọ̀. Fún àwọn ìṣòro tó le koko, kan sí ìrànlọ́wọ́ ìmọ̀-ẹ̀rọ.

• Ẹ̀rọ Inverter Kò Tan: Check battery connections, battery voltage, and AC input (if applicable). Ensure the power switch is in the 'ON' position.
• Ko si AC Output: Verify input power sources (PV, battery, utility). Check for overload or short-circuit conditions. The inverter has built-in protection that may temporarily shut down output.
• Low Battery Performance: Ensure correct battery type settings are configured. Check battery health and charging current settings.
• Ikilọ Apọju: Reduce the connected load. The inverter will automatically attempt to restart after an overload event.
• Ikilọ lori iwọn otutu: Ensure adequate ventilation. Clear any obstructions from the fan or vents.

8. Awọn pato

Detailed technical specifications for the Anern ECO-4200 4200W 24V Hybrid Solar Inverter.

Image: Summary of key technical specifications for the Anern 4200W Hybrid Solar Inverter, including Max. AC Output, Max. MPPT PV Charging Current, Minimum voltage for solar modules, and Max. PV Array Open Circuit Voltage.

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation included with your product or visit the official Anern webojula. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.