Ìwé Àfọwọ́kọ Olùlò Ọ̀ràn Kọ̀ǹpútà Xigmatek Blade

1. Ifihan

Thank you for choosing the Xigmatek Blade ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer chassis. The Xigmatek Blade is designed for high-performance PC builds, featuring a spacious ATX structure, a stylish tempered glass side panel, and efficient cooling with pre-installed 120mm fans.

2. Alaye Aabo

Please read and understand all safety instructions before installing or operating the computer case. Failure to do so may result in personal injury or damage to the product.

• Nigbagbogbo ge asopọ ipese agbara lati inu iṣan ogiri ṣaaju ṣiṣe eyikeyi fifi sori ẹrọ tabi itọju inu ọran naa.
• Be aware of sharp edges inside the chassis. Handle components with care to avoid cuts.
• Wear an anti-static wrist strap when handling internal components to prevent electrostatic discharge (ESD) damage.
• Rí i dájú pé afẹ́fẹ́ tó yẹ wà ní àyíká àpótí náà kí ó má ​​baà gbóná jù.
• Keep the case away from liquids, excessive heat, and direct sunlight.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Xigmatek Blade ATX Computer Case
• Àpótí Ẹ̀rọ (tí ó ní àwọn skru, àwọn ìdádúró, àwọn okùn okùn, àti bẹ́ẹ̀ bẹ́ẹ̀ lọ)
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Eto ati fifi sori

Follow these steps for proper assembly and installation of your PC components into the Xigmatek Blade case.

4.1. Igbaradi

• Unpack the case carefully and place it on a stable, flat surface.
• Gather necessary tools: Phillips head screwdriver, cable ties (some included), anti-static wrist strap.

olusin 1: Iwaju-ẹgbẹ view of the Xigmatek Blade ATX Computer Case, showcasing the tempered glass panel and three front-mounted RGB fans, along with a single rear RGB fan.

4.2. Modaboudu fifi sori

1. Fi I/O shield sinu ẹhin šiši ọran naa.
2. Align the motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor (Micro ATX compatible).
3. Secure the motherboard using the provided screws. Do not overtighten.

4.3. Agbara Ipese Unit (PSU) fifi sori

1. Mount the PSU into the designated rear bottom compartment.
2. Ṣe aabo PSU pẹlu awọn skru lati ẹhin ọran naa.
3. Rí àwọn okùn agbára tí ó yẹ kí ó wà ní orí àwọn ibi tí a ti gé àwọn okùn ìṣàkóso.

olusin 2: Ẹyìn view of the Xigmatek Blade ATX Computer Case, showing the power supply mounting area, expansion slots, and the exhaust fan.

4.4. Fifi sori ẹrọ Awakọ Ibi ipamọ

• Locate the 2.5" SSD/3.5" HDD drive bays.
• Install your storage drives using the appropriate screws.

4.5. Fifi Kaadi Aworan ati Kaadi Imugboroosi sori ẹrọ

1. Yọ awọn ideri PCIe pataki ti o yẹ lati ẹhin ọran naa.
2. Fi kaadi eya aworan rẹ tabi awọn kaadi imugboroosi miiran sinu awọn iho PCIe ti modaboudu.
3. So awọn kaadi naa mọ pẹlu awọn skru.

4.6. Iṣakoso USB

Lo àwọn ohun tí a gé síta àti àwọn ibi tí a ti so mọ́ ara wọn lẹ́yìn àwo módàbù láti ṣètò àwọn wáyà. Èyí mú kí afẹ́fẹ́ àti ẹwà wọn sunwọ̀n síi.

4.7. Iwaju Panel Awọn isopọ

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0/3.0, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

5. Isẹ

Nígbà tí gbogbo àwọn ohun èlò bá ti wà lórí ẹ̀rọ tí a sì ti so àwọn okùn pọ̀, o lè fi agbára sí ẹ̀rọ rẹ.

• Bọtini agbara: Located on the top/front panel of the case. Press to turn on or off your PC.
• Bọtini atunto: Located near the power button. Press to restart your PC.
• Awọn ibudo USB: Use the front USB ports for connecting peripherals.
• Awọn Jacks Audio: Connect headphones and microphones to the front audio jacks.

6. Itọju

Itọju deedee n ṣe iranlọwọ lati rii daju pe iṣẹ ṣiṣe to dara julọ ati igba pipẹ ti awọn ẹya kọnputa rẹ.

• Awọn Ajọ Eruku: The Xigmatek Blade case may include removable dust filters (e.g., on the top, front, or bottom). Clean these filters regularly (monthly or bi-monthly) by removing them and washing with water or brushing off dust. Allow them to dry completely before re-installing.
• Ninu inu: Periodically use compressed air to blow dust out of the case interior, especially from fans, heatsinks, and vents.
• Ode Ninu: Mu ese ita gbangba pẹlu asọ, damp asọ. Yago fun awọn kẹmika lile.

7. Laasigbotitusita

If you encounter issues with your Xigmatek Blade case, refer to the following common troubleshooting tips:

• Ko si Agbara:
  • Rí i dájú pé PSU ti tan-an àti pé a so mọ́ ibi tí a ti ń ta ohun èlò náà dáadáa.
  • Verify that the front panel power switch cable is correctly connected to the motherboard header.
  • Check all power connections to the motherboard and components.
• Awọn onijakidijagan Ko Yiyi:
  • Confirm that the fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Check BIOS/UEFI settings to ensure fan control is enabled and not set to a very low RPM.
• USB/Audio iwaju Panel ko ṣiṣẹ:
  • Ensure the USB and audio headers from the front panel are correctly plugged into the motherboard.
  • Check your operating system's device manager for driver issues.
• Igbóná púpọ̀:
  • Nu eruku ati awọn eroja inu rẹ mọ gẹgẹ bi a ti ṣalaye ninu apakan Itọju.
  • Ensure proper airflow by checking fan orientation and cable management.
  • Consider adding more fans or upgrading your CPU cooler if temperatures remain high.

8. Awọn pato

Key specifications for the Xigmatek Blade Computer Case:

9. Atilẹyin ọja ati Support

Xigmatek products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Xigmatek webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

For technical support or further inquiries, please contact Xigmatek customer service through their official channels. You can typically find contact information on the Xigmatek webojula.

Note: Specific warranty details and support contact information are not provided in this general manual. Please refer to the manufacturer's official resources.