AdaLov CPE369 Wireless Bridge Kit User Manual

1. Ifihan

This user manual provides detailed instructions for the installation, configuration, operation, and maintenance of the AdaLov CPE369 Wireless Bridge Kit. This kit includes three wireless bridges designed for outdoor network expansion, offering high-speed 5.8G wireless connectivity with a 1000Mbps LAN port and a 16dBi antenna for long-range transmission up to 3 kilometers.

The CPE369 kit supports Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connections, making it ideal for extending networks, video surveillance, and internet sharing across various outdoor environments.

2. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

• 3 x CPE369 Wireless Bridges
• 3 x POE Adapters
• 3 x Metal Cable Ties
• 3 x Awọn okun Nẹtiwọọki
• 1 x Itọsọna olumulo

Image: All components included in the CPE369 Wireless Bridge Kit.

3. Ọja Ipariview

The AdaLov CPE369 Wireless Bridge is an outdoor-rated device designed for robust and long-range wireless network extension. Each unit features a 16dBi high-gain directional antenna and supports 5.8GHz frequency for high-speed, low-latency data transmission.

3.1 Key Awọn ẹya ara ẹrọ

• Gbigbe Ibi Gigun: Up to 3KM (1.9 miles) with 16dBi directional antenna.
• Ere giga: 5.8GHz wireless with up to 900Mbps wireless transmission rate and 433Mbps LAN data rate.
• Dual LAN Ports: Includes one 100Mbps and one 1000Mbps LAN port.
• Iduroṣinṣin ita gbangba: IP65 waterproof and dustproof design, resistant to harsh weather conditions (sunlight, frost, rain, humidity, hail).
• Agbara POE: Supports 24V POE power for flexible installation.
• Isọpọ Rọrun: One-key dialing pairing for Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connections.
• Aabo: Supports WEP64/128bits, WPA, WPA2, 802.1x.

3.2 Idanimọ paati

Aworan: Alaye view of the CPE369 unit with labeled components.

• Ọpọn oni-nọmba: Displays current mode (Transmitter A Mode, Receiver B Mode) and pairing status.
• Bọtini atunto: Used for resetting the device or setting the same channel during pairing.
• Bọtini AB: Toggles between Master (A) and Slave (B) modes for pairing.
• LAN (100Mbps) Port: Ibudo Ethernet fun asopọ nẹtiwọọki.
• LAN (1000Mbps) Port: Gigabit Ethernet port for high-speed network connection.
• Agbara DC: Ipese agbara fun ẹrọ naa.
• WLAN Signal Light: Tọkasi agbara ifihan agbara alailowaya.
• Atọka Agbara: Ṣe afihan ipo agbara.

4. Eto ati fifi sori

4.1 Awọn iṣọra aabo

• Rii daju pe ilẹ ti o yẹ fun awọn fifi sori ita gbangba.
• Ma ṣe ṣi ẹrọ naa casing; tọ́ka sí iṣẹ́ ìtọ́jú fún àwọn òṣìṣẹ́ tó péye.
• Use only the provided POE adapters.
• Mount the devices securely to prevent falling.

4.2 Mounting the Devices

The CPE369 units can be installed on a pole or wall-mounted using the provided metal cable ties. Ensure the mounting location provides a clear line of sight between the master and slave bridges for optimal performance.

Aworan: Example of outdoor wall mounting for the CPE369.

4.3 Powering the Devices (POE)

Connect the provided POE adapters to power the CPE369 units. The POE adapter simplifies installation by delivering both power and data over a single Ethernet cable.

4.4 Dialing Pairing (Point-to-Multipoint Configuration)

The CPE369 kit supports easy one-key dialing pairing for Point-to-Multipoint (PTMP) connections. One unit acts as the Master Bridge (Transmitter A Mode), and the other two units act as Slave Bridges (Receiver B Mode).

1. Set Master Bridge: On one CPE369 unit, push the 'A-B' button to the 'A' position. The digital tube will display 'A'.
2. Set Slave Bridges: On the other two CPE369 units, push the 'A-B' button to the 'B' position. The digital tube on these units will display 'B'.
3. Set Same Channel: Press the 'Reset' button on all three bridges simultaneously. This will set them to the same channel for pairing.
4. Sisopọ Aṣeyọri: The devices will automatically pair. The WLAN signal lights will indicate successful connection and signal strength.

Image: Step-by-step guide for dialing pairing the CPE369 units.

Important Considerations for PTMP Setup:

• The slave bridges must be in front of the master bridge.
• The master bridge and slave bridges must be face-to-face.
• Igun ti o pọju laarin afara titunto si ati awọn afara ẹrú ko yẹ ki o kọja awọn iwọn 60.

Image: Guidelines for optimal placement in a Point-to-Multipoint setup.

5. Operation and Applications

5.1 Network Extension (PTMP)

The CPE369 kit is designed to extend your network wirelessly over long distances. The Master CPE connects to your main network (e.g., router, ALDS), and the Slave CPEs provide network access at remote locations.

Image: Network extension diagram using CPE369 in PTMP mode.

5.2 Video Surveillance Transmission

The high-speed and low-latency capabilities of the CPE369 make it ideal for transmitting video streams from security cameras to a central monitoring system (DVR/NVR).

Image: Video surveillance transmission setup with CPE369.

5.3 Starlink Network Extension

The CPE369 can be used to extend Starlink internet service to areas where the Starlink router cannot reach directly, by placing the master bridge near the Starlink dish and extending the network to remote locations.

Image: Starlink network extension using CPE369.

5.4 General Applications

The CPE369 Wireless Bridge Kit is suitable for a wide range of outdoor applications, including:

• Farm and barn network extension
• Warehouse connectivity
• Building-to-building network links
• Garage network extension
• Connecting CCTV cameras
• Corporate WAN connections
• Internet access for remote locations
• Telecommunication masts

Image: Diverse application scenarios for the CPE369.

6. Itọju

The AdaLov CPE369 is designed for minimal maintenance due to its robust IP65 outdoor rating. However, periodic checks can ensure optimal performance and longevity.

• Ayewo ti ara: Periodically inspect the units for any physical damage, loose mounts, or cable wear.
• Ko Laini Oju-ara: Ensure that there are no new obstructions (e.g., growing trees, new buildings) blocking the line of sight between the bridges.
• Ninu: If necessary, gently wipe the exterior of the units with a damp asọ lati yọ idoti tabi idoti. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
• Awọn imudojuiwọn famuwia: Ṣayẹwo awọn olupese ká website for any available firmware updates to ensure the device operates with the latest features and security enhancements.

Image: The CPE369's IP65 rating ensures durability in various weather conditions.

7. Laasigbotitusita

8. Imọ ni pato

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official AdaLov website or contact their customer service directly. The product typically comes with a standard manufacturer's warranty covering defects in materials and workmanship.

Olupese: AdaLov

Ibi Iṣowo: Room 1702, Unit 2, Building 10, Jingyuan Shengshihuadu, Qingfeng Street Middle Road Zhoukou City Chuanhui District 466000 Henan Province China

Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.