Ẹ̀rọ Ìdènà Waya Iná Ẹ̀rọ CREWORKS (Àwòṣe: 1 ikanni-fún 1.5-23mm Waya)

1. Ifihan

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your CREWORKS Electric Wire Stripper Machine. This automatic wire stripping machine is designed to remove insulation from various types of electrical wires, facilitating cable recycling processes. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

2. Awọn ilana aabo

IKILO: Àìtẹ̀lé àwọn ìlànà ààbò wọ̀nyí lè yọrí sí ìkọlù iná mànàmáná, iná, tàbí ìpalára ńlá.

Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the machine.
Ensure the machine is placed on a stable, level surface and securely fastened before operation.
Keep hands and loose clothing away from moving parts, especially the blade and rollers, during operation.
Disconnect the power supply before performing any adjustments, maintenance, or cleaning.
Ma ṣe ṣiṣẹ ẹrọ ni tutu tabi damp awọn ipo.
Rí i dájú pé okùn agbára náà wà ní ipò tó dára àti pé ó dúró dáadáa.
Pa awọn ọmọde ati awọn oṣiṣẹ laigba aṣẹ kuro ni agbegbe iṣẹ.
Do not force wires into the feed hole. Adjust the blade height and feed hole appropriately for the wire size.
In case of malfunction, immediately turn off the machine and disconnect it from the power source. Contact qualified service personnel for repairs.

3. Ọja Ipariview

The CREWORKS Electric Wire Stripper Machine is designed for efficient and safe removal of insulation from various types of wires. It features an adjustable feed hole, a durable CrMoV12 steel blade, and a robust aluminum frame for long-lasting performance.

3.1 Key Awọn ẹya ara ẹrọ

Isẹ aladaaṣe: Strips wires at speeds up to 49 ft./min. (15 m/min.).
Ibamu gbooro: Adjustable feed hole accommodates wires from 0.06" to 0.9" (1.5 to 23 mm) in diameter.
Afẹfẹ ti o tọ: CrMoV12 steel blade ensures clean cuts and extended sharpness.
Adjustable Blade Height: Knob for precise blade adjustment to suit different insulation thicknesses.
Stable Feeding: V-shaped grooved roller system for secure wire guidance and to prevent tangling.
Ikole ti o lagbara: Reinforced aluminum frame for stability and durability.
Apẹrẹ Iwapọ: Portable for use in various locations.

3.2 irinše

CREWORKS Electric Wire Stripper Machine main view — **Nọmba 1:** Akọkọ view of the CREWORKS Electric Wire Stripper Machine. This image displays the overall structure of the machine, including the motor housing, adjustable feed mechanism, and power cord.

Ibugbe mọto: Ni 180W mọto ninu.
Adjustable Feed Hole Plate: Mechanism for adjusting the wire entry point and blade depth.
Bọtini Atunṣe Abẹfẹlẹ: Used to raise or lower the cutting blade.
Aabo: Protects the user from the cutting blade.
Agbara Yi pada: On/Off control for the machine.
V-shaped Grooved Roller: Guides the wire through the stripping mechanism.
Reinforced Aluminum Frame: Pese iduroṣinṣin eto.

Adjustable Feed Hole Plate detail — **Nọmba 2:** Detail of the adjustable feed hole plate. This image highlights the stepless adjustment mechanism and the handy knob for precise control over the wire entry point, accommodating various cable sizes from 0.06" to 0.9".

Ultra-sharp CrMoV12 steel blade detail — **Nọmba 3:** Close-up of the ultra-sharp CrMoV12 steel blade and roller mechanism. This view emphasizes the blade's material properties (high hardness, exceptional resilience, wear resistance, lasting durability) and its interaction with the wire.

High-efficiency roller and holder mechanism — **Nọmba 4:** Illustration of the high-efficiency roller and holder. This image shows the V-shaped grooved roller designed to securely hold flexible cables, preventing tangling and ensuring consistent stripping.

4. Eto

Ṣii silẹ: Carefully remove the wire stripper from its packaging. Inspect for any signs of damage during transit.
Ibi: Position the machine on a sturdy, level workbench or surface. The machine weighs approximately 17.16 lbs (7.8 kg), so ensure the surface can support it.
Ṣiṣe aabo ẹrọ naa: For optimal stability and safety, it is recommended to bolt the machine to your workbench using appropriate fasteners (not included). The base of the machine has pre-drilled holes for this purpose.
Asopọ agbara: Connect the power cord to a standard 110V AC grounded electrical outlet. Ensure the power switch on the machine is in the "OFF" position before plugging it in.
Initial Blade Adjustment: Before first use, familiarize yourself with the blade adjustment knob. Rotate the knob to raise or lower the blade. For initial setup, ensure the blade is slightly above the wire path.

5. Awọn ilana Iṣiṣẹ

Follow these steps for safe and effective wire stripping:

Step-by-step wire stripping process — **Nọmba 5:** Visual guide for the wire stripping process. This image illustrates the four main steps: adjusting the blade, releasing the safety guard, powering on, and feeding the wire.

Adjust Blade Height: Rotate the blade adjustment knob (located on top) to set the desired blade height. The blade should score the insulation without cutting into the copper conductor. Start with a shallower cut and adjust deeper if necessary.
Release Safety Guard: Loosen the locking knob on the safety guard and move it to an open position to allow wire insertion. Ensure it is securely locked back in place once the wire is positioned.
Agbara Tan: Turn on the machine using the power switch. The motor will start, and the rollers will begin to rotate.
Okun ifunni: Carefully insert the end of the wire into the adjustable feed hole. The V-shaped grooved roller will grip the wire and pull it through the machine. Guide the wire steadily.
Gba Waya Ti a Ti Sinu: The stripped insulation will separate from the copper conductor as the wire passes through. Collect the stripped copper wire from the rear outlet.
Agbara Pa: Once stripping is complete, turn off the machine using the power switch.

The machine is compatible with various wire types, including copper wires, multi-conductor wires, electrical wires, stranded wires, and automotive wires, within the specified diameter range.

Wire compatibility chart — **Nọmba 6:** Diagram illustrating the wide range of wire types compatible with the machine, including copper, multi-conductor, electrical, stranded, and automotive wires, all within the 0.06" to 0.9" (1.5-23 mm) diameter range.

6. Itọju

Regular maintenance ensures the longevity and optimal performance of your wire stripper. Always disconnect the machine from the power source before performing any maintenance.

Ninu: After each use, clean any accumulated insulation debris from the blade area, rollers, and feed hole using a brush or compressed air. Do not use water or solvents directly on electrical components.
Ayẹwo abẹfẹlẹ: Periodically inspect the CrMoV12 steel blade for sharpness and damage. A dull or chipped blade can lead to inefficient stripping or damage to the wire. Replace the blade if necessary.
Ayẹwo Roller: Check the V-shaped grooved rollers for wear or damage. Ensure they rotate freely and provide adequate grip.
Lubrication: Refer to the product's specific lubrication requirements. While the manual does not specify, general practice for geared machinery suggests occasional lubrication of moving parts (excluding electrical components) with appropriate grease or oil.
Ibi ipamọ: Store the machine in a dry, clean environment, away from direct sunlight and extreme temperatures.

7. Laasigbotitusita

Isoro	Owun to le Fa	Ojutu
Ẹrọ ko ni agbara lori.	Okun agbara ko ṣe edidi. Ko si agbara lati inu ina. Yipada agbara wa ni pipa.	Ensure power cord is securely plugged into a grounded 110V outlet. Ṣàyẹ̀wò ẹ̀rọ ìdènà ìṣiṣẹ́ tàbí kí o gbìyànjú ọ̀nà ìdènà mìíràn. Yipada agbara si ipo "ON".
Wire is not stripping cleanly or is being cut.	Incorrect blade height adjustment. Abẹ́ tó ti bàjẹ́ tàbí tó ti bàjẹ́. Wire not centered in feed hole.	Adjust the blade height knob. The blade should score the insulation without cutting the conductor. Inspect the blade and replace if dull or damaged. Ensure the wire is properly aligned with the V-shaped groove.
Wire is not feeding through the machine.	Blade height too low, jamming the wire. Rollers ni idọti tabi wọ. Wire diameter is outside the machine's range.	Raise the blade slightly using the adjustment knob. Clean the rollers. If worn, contact support for replacement parts. Verify the wire diameter is between 0.06" and 0.9" (1.5-23 mm).
Ariwo pupọ tabi gbigbọn lakoko iṣẹ.	Machine not securely mounted. Ti abẹnu paati oro.	Ensure the machine is firmly bolted to a stable surface. If noise persists, discontinue use and contact CREWORKS customer support.

8. Awọn pato

Ẹya ara ẹrọ	Ẹ̀kúnrẹ́rẹ́
Brand	Awọn iṣẹ ṣiṣe
Nọmba awoṣe	1 Channel-for1.5-23mm Wires
Ohun elo	Alloy Steel (Blade: CrMoV12), Reinforced Aluminum Frame
Àwọ̀	Grẹy
Iwọn Nkan	17.16 iwon (7.8 kilo)
Orisun agbara	AC
Voltage	110 Volts
Wattage	180 Wattis
Iyara yiyọ	Up to 49 ft./min. (15 m/min.)
Wire Diameter Range	0.06" - 0.9" (1.5 - 23 mm)
Package Mefa	14.84 x 13.3 x 7.4 inches
Awọn irinše to wa	Wire stripper machine

9. Atilẹyin ọja ati Support

For warranty information or technical support, please contact CREWORKS customer service. Details regarding specific warranty periods and terms are typically provided with your purchase documentation or can be found on the official CREWORKS webojula.

Ibi iwifunni: Please refer to your purchase receipt or the CREWORKS official webAaye fun atilẹyin alabara lọwọlọwọ awọn alaye olubasọrọ.

	CREWORKS Manual Wire Stripper User Manual User manual for the CREWORKS Manual Wire Stripper, providing comprehensive instructions on safety, specifications, package contents, installation, operation, maintenance, and troubleshooting for effective wire stripping.
	CREWORKS Laifọwọyi Waya Stripper olumulo Afowoyi - WSM-N030-UK Itọsọna olumulo fun CREWORKS Laifọwọyi Waya Stripper, awoṣe WSM-N030-UK. Itọsọna yii n pese alaye aabo to ṣe pataki, awọn alaye alaye, awọn ilana iṣiṣẹ igbese-nipasẹ-igbesẹ, awọn ilana itọju, ati awọn imọran laasigbotitusita fun yiyọ okun waya daradara.
	CREWORKS Manual Wire Stripper User Manual This user manual provides detailed instructions for the CREWORKS Manual Wire Stripper. It covers safety precautions, product specifications, package contents, installation steps, operation procedures, maintenance guidelines, and troubleshooting tips to ensure safe and effective use of the tool.
	Ìwé Ìtọ́sọ́nà fún Olùlò Ẹ̀rọ Ìtẹ̀ Heat Press - Iṣẹ́, Àwọn Ìlànà Pàtàkì, àti Ìṣàtúnṣe Ìṣòro Ìwé ìtọ́ni tó péye fún ẹ̀rọ Heat Press, tó ní àwọn ìsọfúnni nípa ààbò, àwọn ìlànà pàtó, àwòrán ọjà, fífi sori ẹ̀rọ, iṣẹ́, àwọn ètò tí a dámọ̀ràn, àtúnṣe, ìtọ́jú, ìṣòro, àti pípa nǹkan nù. Ó ní àwọn àlàyé lórí àwọn àwòṣe WBFHPM20OZ àti WBFHPM30OZ.
	Ìwé Ìtọ́sọ́nà Olùlò Ẹ̀rọ Títẹ̀ Heat Press Ìwé ìtọ́ni fún ẹ̀rọ Heat Press, èyí tí ó pèsè ìwífún nípa ààbò, àwọn ìlànà pàtó, fífi sori ẹ̀rọ, iṣẹ́, ìṣòro, àti àwọn ìlànà ìtọ́jú.
	Ìwé Ìtọ́sọ́nà Olùlò fún Afẹ́fẹ́ Títẹ̀ Gíga Ìwé ìtọ́ni fún ẹ̀rọ amúṣẹ́pọ̀ afẹ́fẹ́ gíga, àlàyé nípa ààbò, àwọn ìlànà pàtó, àkóónú àpò, àwòrán ọjà, àkójọpọ̀, iṣẹ́, ìtọ́jú, ìṣòro, àti ìdajì.

CREWORKS 1 Channel-for1.5-23mm Wires

Ẹ̀rọ Ìdènà Waya Iná Ẹ̀rọ CREWORKS (Àwòṣe: 1 ikanni-fún 1.5-23mm Waya) - Ìwé Ìtọ́sọ́nà Olùlò