AsperX AX260 3000A Jump Starter with Air Compressor User Manual

1. Alaye Aabo

Ka gbogbo awọn ikilọ ailewu, awọn itọnisọna, awọn apejuwe, ati awọn pato ti a pese pẹlu ọja yii. Ikuna lati tẹle gbogbo awọn ilana ti a ṣe akojọ rẹ si isalẹ le ja si mọnamọna, ina, ati/tabi ipalara nla.

• Nigbagbogbo wọ aabo oju nigbati o ba n ṣiṣẹ pẹlu awọn batiri.
• Do not operate the jump starter if it is damaged.
• Keep the jump starter away from children.
• Maṣe fi ọja naa han si ojo tabi awọn ipo tutu.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara.

2. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart Jumper USB
• 1 x USB-A si okun USB-C
• 1 x Apo gbigbe
• 1 x Pump Tube
• 3 x Nozzles Air
• 1 x Itọsọna olumulo

3. Ọja Ipariview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Awọn ẹya pataki pẹlu:

• Isan omi 3000A: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI Kọnpireso afẹfẹ: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-Lumen LED Light: Offers constant lighting, flash, and SOS modes.
• Iṣẹ Bank Power: USB-A output and USB-C input for charging electronic devices.

4. Eto

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Awọn ilana Iṣiṣẹ

5.1. Fo Bibẹrẹ Ọkọ

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. So pupa clamp si ebute rere (+) ti batiri ọkọ ati dudu clamp si ebute odi (-).
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Lilo Air Compressor

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Lo awọn bọtini '+' ati '-' lati ṣeto titẹ afojusun naa.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Agbara Bank iṣẹ

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Ẹrọ naa yoo bẹrẹ gbigba agbara laifọwọyi.

5.4. Tọṣi LED

The 400-lumen LED light offers multiple modes for different situations.

• Tẹ lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Mu lamp switch button to turn off the light.

6. Itọju

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Fi aṣọ gbígbẹ tí ó rọ, fọ ẹ̀rọ náà. Má ṣe lo àwọn kẹ́míkà líle tàbí àwọn ohun èlò ìpalára.
• Tọju ni itura kan, ibi gbigbẹ. Yago fun awọn iwọn otutu to gaju.

7. Laasigbotitusita

• Ẹrọ ti ko tan: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Ọkọ ayọkẹlẹ ko bẹrẹ: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Konpireso afẹfẹ ko n fun ni afẹfẹ: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Awọn pato

9. Awọn fidio ọja osise

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX webojula. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.