1. Ifihan
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Scheppach HC24-8S Horizontal Compressor. Please read this manual thoroughly before using the compressor and keep it for future reference. This compressor is universally applicable for work around the house, workshop, or garage.
2. Awọn ilana aabo
Nigbagbogbo ṣe akiyesi awọn iṣọra aabo ipilẹ nigba lilo awọn ohun elo itanna lati dinku eewu ina, mọnamọna, ati ipalara ti ara ẹni.
- Ka gbogbo awọn ilana ni pẹkipẹki ṣaaju ṣiṣe.
- Rii daju pe ipese agbara ibaamu voltage specified on the compressor's rating plate.
- Ma ṣe ṣiṣẹ konpireso ni tutu tabi damp awọn ipo.
- Pa awọn ọmọde ati awọn eniyan laigba aṣẹ kuro ni agbegbe iṣẹ.
- Wear appropriate personal protective equipment (PPE) such as safety glasses and hearing protection.
- Nigbagbogbo ge asopọ ipese agbara ṣaaju ṣiṣe eyikeyi itọju tabi atunṣe.
- Maṣe darí ṣiṣan afẹfẹ si eniyan tabi ẹranko.
- Ensure adequate ventilation when operating the compressor.
3. Package Awọn akoonu
Carefully unpack all components and check for any damage. If any parts are missing or damaged, contact your supplier immediately.
Figure 3.1: Scheppach HC24-8S Horizontal Compressor with included accessories.
Nọmba 3.2: Alaye view of the 5 included accessories: air hose, pressure gauge with air gun, and various nozzles.
Ni igbagbogbo package naa pẹlu:
- Scheppach HC24-8S Horizontal Compressor unit
- Air hose (50 meters)
- Pressure gauge with air gun
- Various nozzles (5 accessories in total)
- Itọsọna olumulo
4. Eto
Follow these steps to set up your compressor for first use:
- Ṣii silẹ: Remove the compressor and all accessories from the packaging.
- Ibi: Place the compressor on a stable, level surface in a well-ventilated area. Ensure there is sufficient space around the unit for air circulation.
- Wheel Assembly (if not pre-assembled): Attach the wheels to the designated axles on the compressor base. Secure them with the provided fasteners.
- Rubber Feet/Stands: Ensure the rubber feet or stands are properly attached to absorb vibrations and provide stability.
- Awọn ẹya ara ẹrọ Nsopọ: Connect the air hose to the compressor's air outlet. Ensure a secure connection to prevent air leaks. Attach the desired accessory (e.g., pressure gauge with air gun, nozzle) to the other end of the hose.
- Asopọ agbara: Plug the compressor's power cord into a grounded 230 Volt electrical outlet. Ensure the power switch is in the 'OFF' position before plugging in.
5. Awọn ilana Iṣiṣẹ
5.1 Bibẹrẹ konpireso
- Ensure all connections are secure and the air hose is not kinked.
- Turn the main power switch to the 'ON' position. The compressor will start to build pressure in the tank.
- The compressor will automatically shut off once the maximum pressure (8 BAR) is reached.
5.2 Ṣíṣe àtúnṣe ìfúnpá
The compressor is equipped with a pressure regulator. Turn the knob on the regulator clockwise to increase pressure and counter-clockwise to decrease pressure. Monitor the pressure gauge to set the desired working pressure for your application.
5.3 Lilo Awọn ẹya ẹrọ
Attach the appropriate accessory for your task. For example, use the air gun for cleaning or inflating, and specific nozzles for different inflation needs. Always ensure the accessory is securely attached before use.
5.4 Tiipa
- Turn the main power switch to the 'OFF' position.
- Ge asopọ okun agbara lati iṣan.
- Slowly open the drain valve at the bottom of the air tank to release any condensed moisture and residual air pressure. Close the valve once the tank is empty.
6. Itọju
Itọju deedee n ṣe idaniloju pe compressor rẹ yoo pẹ to ati pe yoo ṣiṣẹ daradara.
- Imugbẹ Imugbẹ: Drain the air tank daily or after each use to remove condensed moisture. This prevents rust and extends tank life.
- Ajọ Afẹfẹ mimọ: Periodically check and clean the air filter. A clogged filter reduces efficiency and can damage the motor. Replace if necessary.
- Ṣayẹwo fun Leaks: Regularly inspect all hoses and connections for air leaks. Tighten connections or replace damaged parts as needed.
- Isọsọ gbogboogbo: Keep the compressor clean and free of dust and debris. Use a dry cloth for cleaning. Do not use solvents.
- Ibi ipamọ: Tọ́jú compressor náà sí ibi tí ó gbẹ tí ó sì mọ́ nígbà tí a kò bá lò ó.
7. Laasigbotitusita
Abala yii n ṣalaye awọn ọran ti o wọpọ ti o le ba pade.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Compressor ko bẹrẹ | Ko si ipese agbara Agbara yipada Gbona apọju Idaabobo mu ṣiṣẹ | Ṣayẹwo asopọ agbara ati iṣan Turn power switch to 'ON' Allow compressor to cool down, then restart |
| Compressor nṣiṣẹ lemọlemọ tabi nigbagbogbo | Afẹfẹ jo ninu eto Aṣiṣe titẹ titẹ | Check all connections and hoses for leaks; tighten or replace Kan si oṣiṣẹ iṣẹ ti o peye |
| Ìjáde titẹ afẹfẹ kekere | Àlẹmọ afẹfẹ sé Afẹfẹ jijo Ti ṣeto olutọsọna titẹ ti o kere ju | Nu tabi ropo air àlẹmọ Check for and seal air leaks Adjust pressure regulator to desired setting |
| Ariwo pupọ tabi gbigbọn | Awọn paati alaimuṣinṣin Compressor not on level surface | Check and tighten all bolts and screws Gbe konpireso lori idurosinsin, dada ipele |
8. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Olupese | Schepach |
| Nọmba awoṣe | HC24-8S (Item No. 4046664209386) |
| Ọja Mefa | 60 x 36 x 28 cm |
| Iwọn Nkan | 21.3 kilo |
| Wakọ Iru | Ti firanṣẹ |
| Voltage | 230 folti |
| Hose Gigun | 50 Mita |
| Agbara ojò | 24 liters |
| Iwọn titẹ to pọju | 8 Pẹpẹ |
| Agbara | 750W |
| Awọn batiri To wa | Rara |
9. Atilẹyin ọja ati Support
Scheppach products are manufactured with high-quality materials and undergo strict quality controls. Your Scheppach HC24-8S Horizontal Compressor comes with a comprehensive warranty.
Figure 9.1: Scheppach 5+5 Years Warranty information.
This product typically includes a 5+5 years warranty. For detailed information regarding warranty registration and conditions, please visit the official Scheppach warranty webojula:
For technical support, spare parts, or any other inquiries, please contact Scheppach customer service or your authorized dealer. Always have your product model number and serial number ready when contacting support.
