1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of your Ehaho 2PCS 1FT Whip Lights. These LED whip lights are designed to enhance visibility and aesthetics for various off-road vehicles. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Ohun ti o wa ninu Apoti
Rii daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori ẹrọ.
- 2 x Spiral Whip Lights (1FT)
- 1 x RF Isakoṣo latọna jijin
- 1 x Flag Holder Set
- 2 x American Flags
- 2 x Off-Road Flags
- 2 x Skull Flags
- 1 x Ilana itọnisọna (iwe yii)
- 1 x Rocker Yipada
- Oluṣakoso 1 x
Figure 2.1: Contents of the LED Whip Light Kit, including two spiral whip lights, remote control, flag holder set, various flags, rocker switch, and controller.
3. Awọn ẹya ara ẹrọ
- Upgraded Brightness & Vibrant Colors: 2nd-Gen design with 84pcs RGB LEDs and 5050 RGB LED chips for tripled brightness and 360° uniform light.
- Dual Control & Programmable Effects: Control via dedicated App or RF remote. Features 16 million colors and 366 customized patterns (stream, strobe, cascade, chase, pulse). Adjust brightness, speed, color width, and motion directions.
- Integrated Spring Base: Reinforced spring base for flexibility, buffering pressure, and reducing breakage risk. Aesthetically pleasing and easy to disassemble.
- Ti o tọ & Mabomire: Made of shockproof tube and bendable high-toughness resin. IP68 waterproof rating for off-road and extreme weather conditions.
- Improved Battery Protection: Includes a rocker switch to prevent vehicle battery drain when lights are in standby mode. Operates on 12V DC.
- Turn Signal & Music Synchronization: Features music sync function for lights to dance to phone music. Includes extra red stop/brake light, amber turn signal light, and white reverse/backup light for safety.
- Awọn ohun elo ti o gbooro: Suitable for UTV, ATV, 4 Wheeler, trucks, Go Kart, RZR, Can-am, Polaris, Dune Buggy, SXS, Sand Rail, motorcycle, and Boat.
4. Alaye Aabo
- Ensure the vehicle's power supply is 12V DC. If exceeding 12V, use a voltage converter lati se ibaje.
- Always disconnect the vehicle's battery before performing any electrical installation.
- Securely mount all components to prevent detachment during vehicle operation.
- Verify all wiring connections are correct and insulated to prevent short circuits.
- Má ṣe tẹjú mọ́ iná LED fún ìgbà pípẹ́, nítorí pé èyí lè fa kí ojú máa gbọ̀n.
- Adhere to local regulations regarding vehicle lighting.
5. Eto ati fifi sori
5.1. Quick Connect Base Assembly
The whip lights feature a quick-disconnect base for easy attachment and removal.
Video 5.1: Demonstrates the quick connect and release base mechanism for the whip lights. The video shows how to securely attach and detach the whip light from its base.
- Attach the quick connect base to your vehicle's mounting point.
- Align the whip light with the base and slide it down until it clicks securely into place.
- To remove, slide the quick disconnect base "up" to release.
5.2. Wiring the Rocker Switch
The included rocker switch helps protect your vehicle's battery from draining. Refer to the diagram below for wiring instructions.
Figure 5.2: Wiring diagram for the rocker switch. Connect the negative of the lamp's controller and battery to pin 8, incoming power to pin 2, and the positive of the lamp's controller to pin 3. Lower light negative to pin 7 and lower light positive to pin 6.
- Connect the negative wire of the lamp's controller and battery to pin 8 (Upper Light Neg. (-) source).
- Connect the incoming power wire to pin 2 (Incoming from power).
- Connect the positive wire of the lamp's controller to pin 3 (Outgoing to relay, accessory or equipment).
- For the lower light, connect the negative to pin 7 and positive to pin 6.
- Rii daju pe gbogbo awọn asopọ wa ni aabo ati idabobo daradara.
5.3. Turn Signal and Brake Light Wiring
The whip lights support turn signal, brake, and reverse light functions. Connect the corresponding wires to your vehicle's existing wiring system.
- Laini buluu: Connect to the vehicle's left turn signal wire.
- Black Line: Connect to the vehicle's right turn signal wire.
- Laini Pupa: Connect to the vehicle's brake light wire.
- Ìlà Funfun: Connect to the vehicle's reverse/backup light wire.
Figure 5.3: Wiring connections for turn signals, brake, and reverse lights. Blue for left turn, black for right turn, red for brake, and white for reverse.
6. Isẹ
6.1. Isẹ Iṣakoso latọna jijin
The included RF remote control allows for easy adjustment of light settings.
Figure 6.1: Layout of the RF Remote Control, showing buttons for power, brightness, color selection, dynamic modes, speed adjustment, and music rhythm modes.
- TAN/PA: Fi agbara awọn imọlẹ si tan tabi pa.
- R/G/B/W: Select Red, Green, Blue, or White static colors.
- Color Buttons (Yellow, Red, Orange, Blue): Select additional static colors.
- Atunse Imọlẹ: Mu imọlẹ ina pọ si tabi dinku.
- Mode Buttons (1-12): Select from 12 unique exclusive modes.
- DIY Buttons (DIY1-DIY4): Save your favorite custom modes. Long press to save.
- LATIO: Activates automatic play of various modes.
- Titunṣe Iyara: Increase or decrease the speed of dynamic modes.
- Ṣatunṣe Awọ: Adjust color settings within dynamic modes.
- Music Rhythm Modes (1-4): Mu awọn imọlẹ ṣiṣẹpọ pẹlu orin.
- SOS: Activates an SOS emergency mode.
- Timer (30 min, 60 min): Ṣeto aago kan fun tiipa laifọwọyi.
6.2. App Control Operation
Download the dedicated Ehaho app from your smartphone's app store for advanced control and customization.
Olusin 6.2: Example of the smartphone app interface for controlling the whip lights, offering a color wheel, preset modes, and music synchronization options.
- Kẹkẹ awọ: Yan lati inu awọn awọ miliọnu 16.
- Custom Patterns: Access 366 customized patterns.
- Amuṣiṣẹpọ orin: Lights dance to the rhythm of your phone's music.
- Imọlẹ/Iyara: Fine-tune brightness and animation speed.
- Awọn ọna DIY: Create and save your own unique lighting sequences.
7. Itọju
- Ninu: Wipe the whip lights with a soft, damp asọ. Yago fun abrasive ose tabi epo.
- Ayewo: Periodically check all wiring connections for tightness and signs of wear or damage.
- Idaabobo omi: The lights are IP68 waterproof, but ensure all connections are sealed properly after installation or maintenance.
- Ibi ipamọ: If removing the lights for extended periods, store them in a dry, cool place away from direct sunlight.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Awọn imọlẹ ko tan. | No power, loose connection, faulty switch/controller. | Check power source, ensure all wires are securely connected, test rocker switch and controller. |
| Awọn imọlẹ flicker tabi baibai. | Vol kekeretage, poor connection, damaged wiring. | Verify 12V DC power, inspect connections for corrosion or looseness, check for damaged wires. |
| Isakoṣo latọna jijin ko ṣiṣẹ. | Dead battery in remote, remote out of range, interference. | Replace remote battery (CR2032), ensure line of sight to controller, reduce interference. |
| Iṣakoso ohun elo ko sopọ mọ. | Bluetooth not enabled, app not paired, outdated app. | Ensure Bluetooth is on, pair the device in the app, update the app to the latest version. |
| Turn signals/brake lights not functioning correctly. | Incorrect wiring, faulty vehicle signal. | Double-check the specific wiring connections for turn signals, brake, and reverse lights. Test vehicle signals. |
9. Awọn pato
- Awoṣe: EH1FT2
- Light Source Length: 1 Ẹsẹ
- Nọmba Awọn nkan: 2
- Iru LED: 84pcs RGB LEDs with 5050 RGB LED chips
- Àwọ̀: RGB (Multi-Color)
- Awọn ọna Iṣakoso: APP Control, RF Remote Control
- Awọn ẹya pataki: Customizable Flash Patterns, Customizable Music Modes, Dust Proof, Multi-Color, Integrated Spring Base, Battery Protect Rocker Switch, Turn Signal & Music Synchronization
- Ohun elo: Aluminiomu, Ṣiṣu, Roba
- Ipele Resistance Omi: IP68 mabomire
- Awọn ọna Voltage: 12V DC
- Awọn Iwọn Nkan (L x W x H): 14 x 0.8 x 0.8 inches
- Ìwọ̀n Nkan: 3.34 iwon
- Awọn batiri: 1 CR2032 battery required for remote (included)
- Iru Ibamu Ọkọ ayọkẹlẹ: Universal Fit
10. Atilẹyin ọja ati Support
Ehaho products are manufactured to high-quality standards. For warranty information, technical support, or assistance with installation and troubleshooting, please refer to the contact information provided on the product packaging or visit the official Ehaho webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.