QttyElok Wifi Tuya Door Access Control System User Manual

1. Ifihan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your QttyElok Wifi Tuya Door Access Control System. This system offers advanced security features including smart phone APP unlock, RFID card access, and password entry, designed for both convenience and robust protection.

Figure 1: QttyElok Wifi Tuya Door Access Control System Kit (without lock)

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• Wifi Tuya Access Control Keypad (IP68 Waterproof)
• Power Supply (AC110-260V input, DC12V 3A output)
• Door Exit Button
• 10pcs RFID Keyfobs (125KHz and 13.56MHz dual frequency)

Note: Electric lock is NOT included in this kit.

3. Ọja Awọn ẹya ara ẹrọ ati irinše

Figure 2: IP68 Waterproof Keypad for outdoor installation. Features full PC glue in the back side, allowing it to work in rain and storm.

Figure 3: Touch keyboard with blue backlight and integrated doorbell button for convenient use in low light conditions.

Figure 4: Power Supply Control unit with input AC110-260V 50-60Hz and output DC12V 3A. Includes adjustable time delay for locks (0-15 seconds).

Figure 5: Door Exit Button (86x86mm, plastic, supports NC/NO modes) and 10pcs ABS RFID Keyfobs (13.56MHz, Mi-fare 1k chip, 0-5cm reading distance).

4. Eto ati fifi sori

4.1 Wiring aworan atọka

Proper wiring is crucial for the system's functionality. Refer to the diagram below for connection details. Ensure all connections are secure before powering on the system.

Figure 6: Wiring diagram showing connections between Access Controller, Power Supply, Exit Button, and Electric Locks (not included).

4.2 Tuya APP Integration

The system integrates seamlessly with the Tuya Smart APP, allowing for remote control and user management. Follow the steps below to add your device and configure settings via the app.

Adding Device to Tuya APP:

1. Turn on Tuya APP.
2. Wọle *123456#041# lori oriṣi bọtini.
3. In the APP, click "Add device".
4. Tẹ ọrọ igbaniwọle Wifi rẹ sii.
5. Once added, click "Done".

5. Awọn ilana Iṣiṣẹ

5.1 Awọn ọna ṣiṣi silẹ

The system supports multiple convenient unlocking methods:

• Tuya APP Remote Unlock: Open the door directly from your smartphone via the Tuya APP.
• Ṣii silẹ kaadi RFID: Swipe a registered RFID card on the keypad.
• Ṣii ọrọ igbaniwọle silẹ: Enter a valid password on the keypad.

Figure 7: Visual representation of unlocking the door using the Tuya APP, RFID card, or a password.

5.2 User Management via Tuya APP

The Tuya APP provides extensive user management capabilities. Refer to Video 1 for a detailed walkthrough.

Setting Temporary Password:

Temporary passwords are valid for 6 hours and can be used once. They can be shared via WeChat, Email, or Message.

Figure 8: Setting and sharing a temporary password through the Tuya APP.

Adding Private Password:

1. In the APP, navigate to "Member manage" and click "Add".
2. Input a 6-digit code.
3. Click "Save".

Adding RFID Card:

1. In the APP, navigate to "Member manage" and click "Add" under "Card".
2. Swipe the RFID card on the keypad.
3. Click "Done" in the APP.

Viewing Unlock Records:

Click on the reminder information within the Tuya APP to view a log of all unlock events, including method and time.

Figure 9: Screenshots of the Tuya APP interface, showing options for member management, temporary codes, attendance, and unlock logs.

5.3 Keypad Programming (Advanced)

The following operations are performed directly on the keypad using the programming password (default: 123456). Always remember to press * lati jade kuro ni ipo siseto.

Set Management Card (Add/Delete):

• Add Management Card: Wọle *Programming Password#7, then swipe the card.
• Delete Management Card: Wọle *Programming Password#8, then swipe the card.

Ṣafikun Kaadi Olumulo:

• Method 1 (Sequential): Wọle *Programming Password#1, then swipe the card.
• Method 2 (Specific User Code): Wọle *Programming Password#1 User Code#, then swipe the card.

Delete User Card:

• Method 1 (By Swiping): Wọle *Programming Password#3, then swipe the card to delete it.
• Method 2 (By Card Number): Wọle *Programming Password#3 Card Number# to delete a specific card.
• Method 3 (By User Code): Wọle *Programming Password#3 User Code# to delete a user's card.
• Pa Gbogbo Awọn olumulo rẹ: Wọle *Programming Password#4 Programming Password# to delete all registered users.

Combined Door Opening Method (RFID Card + Password):

• Tan-an: Wọle *Programming Password#021#.
• Paa: Wọle *Programming Password#020#.

Ipo Ṣii ni deede:

• Tan-an: Swipe a valid card or enter a valid password, then press 0#. The door will remain unlocked.
• Paa: Swipe a valid card or enter a valid password again. The door will return to normal locked mode.

Modify Public Unlocking Password:

The default public unlocking password is 7890.

• Tun oruko akowole re se: Wọle *Programming Password#2 New Password# New Password#*.

Ṣatunṣe Ọrọigbaniwọle Eto:

The default programming password is 123456.

• Tun oruko akowole re se: Wọle *Programming Password#9 New Programming Password# New Programming Password#*.

Pada Awọn Eto Ile-iṣẹ pada:

• Pada sipo: Wọle *Programming Password#6 Programming Password#*. This will reset all settings to default.

6. Awọn pato

7. Itọju

To ensure the longevity and optimal performance of your access control system, follow these maintenance guidelines:

• Ninu: Wipe the keypad and other components with a soft, damp asọ. Yago fun abrasive ose tabi olomi ti o le ba awọn dada.
• Awọn isopọ: Lokọọkan ṣayẹwo gbogbo awọn asopọ onirin lati rii daju pe wọn wa ni aabo ati ominira lati ipata.
• Awọn imudojuiwọn sọfitiwia: Keep your Tuya APP updated to the latest version to benefit from new features and security enhancements.
• Keyfobs: Store RFID keyfobs in a safe place to prevent loss or damage.

8. Laasigbotitusita

If you encounter issues with your QttyElok Wifi Tuya Door Access Control System, refer to the common problems and solutions below:

• Eto Ko Dahun:
  • Ṣayẹwo awọn asopọ ipese agbara.
  • Ensure the power supply is providing the correct voltage (DC12V).
• RFID Card Not Working:
  • Ensure the card is properly registered in the system (refer to Section 5.2).
  • Verify the card is being swiped within the optimal reading distance (0-5cm).
  • Check if the card is damaged.
• Password Not Working:
  • Ṣayẹwo ọrọ igbaniwọle ti a tẹ lẹẹmeji fun deede.
  • Ensure the password has not expired (for temporary passwords).
  • Verify the public or private password is correctly set (refer to Section 5.3).
• Tuya APP Connectivity Issues:
  • Ensure your Wi-Fi network is stable and the keypad is within range.
  • Rí i dájú pé a ti tẹ ọ̀rọ̀ìpamọ́ Wi-Fi tó tọ́ nígbà tí a ń ṣètò rẹ̀.
  • Restart the Tuya APP and/or your smartphone.
  • Check if the keypad's Wi-Fi indicator light is active.
• Door Not Unlocking in Normally Open Mode:
  • Ensure the normally open mode was activated correctly by swiping a valid card/password and pressing 0#.
  • If the mode is active, the work indicator light should be green.

Tí ìṣòro náà bá ń bá a lọ lẹ́yìn gbígbìyànjú àwọn ìdáhùn wọ̀nyí, jọ̀wọ́ kan sí ìrànlọ́wọ́ àwọn oníbàárà fún ìrànlọ́wọ́ síwájú sí i.

9. Atilẹyin ọja ati Support

QttyElok products are designed for reliability and performance. For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official QttyElok webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.