Zalman P30 Micro-ATX Case Instruction Manual

1. Ifihan

The Zalman P30 is a spacious Micro-ATX computer chassis designed to accommodate both Micro-ATX and Mini-ITX motherboards. It features panoramic frameless tempered glass panels for an unobstructed view of your internal components and comes with three pre-installed 120mm Addressable RGB fans for enhanced cooling and aesthetics. This manual provides essential information for the proper assembly, operation, and maintenance of your P30 case.

Figure 1: The Zalman P30 Micro-ATX Case showcasing its panoramic tempered glass and internal components with RGB lighting.

2. Alaye Aabo

• Máa yọ agbára iná kúrò nínú ihò ògiri kí o tó ṣe ìfisí tàbí ìtọ́jú èyíkéyìí.
• Handle tempered glass panels with care to prevent breakage. Avoid impacts or dropping the panels.
• Wear an anti-static wrist strap or frequently touch a grounded metal object to prevent electrostatic discharge (ESD) when handling internal components.
• Be cautious of sharp edges inside the chassis during installation.
• Keep the case and its components away from liquids and excessive humidity.

3. Package Awọn akoonu

Verify that all listed components are included in your package:

• Zalman P30 Micro-ATX Case
• 3 x 120mm Addressable RGB Fans (pre-installed)
• Accessory Box (containing various screws, anti-vibration rings, cable ties, etc.)
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Awọn pato

Figure 2: Detailed dimensions of the Zalman P30 chassis.

5. Eto

5.1. Modaboudu fifi sori

The Zalman P30 supports Micro-ATX and Mini-ITX motherboards. Ensure your motherboard's form factor is compatible before proceeding.

• Remove the tempered glass side panel by gently pulling it open.
• Install the necessary motherboard standoffs. The case comes with pre-installed standoffs, and additional ones are provided in the accessory box if needed.
• Fi pẹ̀lẹ́pẹ̀lẹ́ gbé mótábódì rẹ sí orí àwọn ibi tí wọ́n ti ń dì í, kí o sì ṣe àtúnṣe àwọn ihò skru náà.
• Ṣe aabo modaboudu pẹlu awọn skru ti a pese.

Figure 3: Motherboard compatibility for the P30 case.

5.2. Fifi sori Ipese Agbara

The power supply unit (PSU) is mounted at the bottom of the case.

• Slide the PSU into its designated compartment at the bottom rear of the case.
• Secure the PSU using the screws provided in the accessory box.
• So awọn okun agbara ti o nilo pọ mọ modaboudu rẹ ati awọn paati miiran.

5.3. Fifi sori ẹrọ ẹrọ ipamọ

Àpótí náà ṣe atilẹyin fún 2.5" SSDs àti 3.5" HDDs.

• Locate the storage drive bays/mounts within the chassis.
• Mount your 2.5" SSDs or 3.5" HDDs using the appropriate screws and anti-vibration rings from the accessory box.

5.4. Graphics Kaadi fifi sori

The Zalman P30 supports graphics cards up to 420mm in length.

• Yọ awọn ideri PCIe pataki ti o yẹ lati ẹhin ọran naa.
• Insert your graphics card into the primary PCIe slot on your motherboard.
• Fi awọn skru so kaadi eya aworan mọ.
• Utilize the pre-installed anti-sag bracket to support heavier graphics cards. Adjust its position and height as needed.

5.5. Fifi sori ẹrọ afẹ́fẹ́ ati radiator

The case comes with three pre-installed 120mm ARGB fans. Additional cooling options are available:

• Oke: Ṣe atilẹyin fun awọn radiators 360mm tabi awọn onijakidijagan 3x 120mm / 2x 140mm.
• Apa: Supports 2x 120mm fans (pre-installed as intake).
• Ẹyìn: Supports 1x 120mm fan (pre-installed as exhaust).
• Isalẹ: Supports 3x 120mm / 2x 140mm fans.

Olusin 4: Pariview of fan specifications and pre-installed ARGB fans.

5.6. Iṣakoso USB

The Zalman P30 features enhanced cable organization to maintain a clean build.

• Route all cables through the designated cutouts and rubber grommets behind the motherboard tray.
• Use the included cable ties to bundle and secure cables, preventing interference with airflow and maintaining a tidy interior.

Figure 5: Cable management features of the P30 case.

6. Awọn ilana Iṣiṣẹ

After completing the assembly, ensure all connections are secure before powering on your system.

• Titan/Apapa: Use the power button located on the front I/O panel.
• Iṣakoso ARGB: The pre-installed ARGB fans can be customized via a 3-pin header connection to your motherboard's ARGB header. Use your motherboard's software to control lighting effects.
• Iwaju I / O: Connect peripherals to the USB-C, USB 3.0, and 3.5mm audio jacks on the front panel.

Figure 6: Front I/O panel details.

7. Itọju

Itọju deedee n ṣe iranlọwọ lati rii daju pe iṣẹ ṣiṣe to dara julọ ati igba pipẹ ti awọn paati PC rẹ.

• Awọn Ajọ Eruku: The case features magnetic dust filters on the top and bottom panels. Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup.
• Yiyọ igbimọ: The panoramic tempered glass front and side panels are tool-less and easily removable for cleaning and access to internal components.

Figure 7: Instructions for removing top panel and bottom dust filter.

8. Laasigbotitusita

Ti o ba pade awọn iṣoro, ronu awọn igbesẹ laasigbotitusita ti o wọpọ wọnyi:

• Ko si Agbara: Ensure the PSU is properly connected to the wall outlet and the motherboard. Check the PSU's on/off switch.
• Ko si Ifihan: Verify that the graphics card is correctly seated in its PCIe slot and connected to the monitor. Check all power connections to the GPU.
• Àwọn Ìṣòro Afẹ́fẹ́/RGB: Confirm that all fans and ARGB cables are securely connected to the motherboard or a dedicated controller. Check motherboard software for ARGB settings.
• Igbóná púpọ̀: Ensure all fans are spinning correctly and dust filters are clean. Verify proper CPU cooler installation.

9. Fidio ọja

10. Atilẹyin ọja ati Support

Zalman products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official Zalman webAaye fun alaye atilẹyin ọja ofin ati ipo.

For technical support or customer service, please contact Zalman customer support through their official channels. Contact information can typically be found on the Zalman webaaye tabi ninu iwe ọja rẹ.