SmallRig Cage Kit for Sony A7C II / A7CR User Manual

Ọrọ Iṣaaju

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the SmallRig Cage Kit 4422 for Sony Alpha 7C II and Alpha 7CR cameras. This kit is designed to protect your camera and enhance its functionality for video recording and photography by providing multiple accessory mounting points and improved ergonomics.

Ohun ti o wa ninu Apoti

• Ẹyẹ x1
• Clamp for HDMI Cable x 1
• Ilana olumulo x 1

Figure 1: Contents of the SmallRig Cage Kit 4422 package.

Eto ati fifi sori

1. Installing the Camera Cage

The SmallRig Cage Kit 4422 is designed for a precise fit with the Sony Alpha 7C II and Alpha 7CR cameras. Follow these steps for proper installation:

1. Mura Kamẹra naa: Before installing the cage, ensure the camera is powered off. It is recommended to remove the strap ring located on the camera's right side to ensure a secure and flush fit of the cage.
2. So Àpótí náà pọ̀ mọ́: Align the camera with the cage. The cage locks the camera via two main points:
   • Secure the camera to the cage using the 1/4"-20 screw located on the bottom of the cage. Tighten this screw firmly.
   • Further secure the camera with the M2.5 screw on the side of the cage. This dual-point locking mechanism prevents twisting and ensures stability.

Figure 2: SmallRig Cage 4422 mounted on a Sony A7C II camera, providing protection and additional mounting points.

Nọmba 3: Alaye view of the cage's anti-twist locking mechanism, utilizing both bottom and side screws for stability.

2. Attaching the HDMI Cable Clamp

Okun HDMI cl ti o wa ninuamp helps protect the camera's HDMI port and ensures stable signal transmission during use.

1. Insert your HDMI cable into the camera's HDMI port.
2. Gbe okun clamp around the HDMI cable and align it with the designated mounting point on the cage.
3. Tighten the thumb screw on the cable clamp to secure it in place. This allows for quick assembly and disassembly.

Akiyesi:

• If you need to use the camera's headphone jack, you may need to remove the HDMI Cable Clamp akọkọ.

Àwòrán 4: Okùn HDMI clamp providing a stable and protected connection for the HDMI cable.

Ṣiṣẹ́ Ohun elo Ẹyẹ naa

1. Enhanced Handgrip Feeling

The cage features an integrated hinge arm design at the battery compartment, which not only seamlessly fits the camera's curve but also significantly improves the overall handgrip. This ergonomic design provides a more comfortable and secure hold, especially beneficial for extended shooting sessions.

Figure 5: The cage enhances the camera's handgrip for improved comfort and stability.

2. Multiple Mounting Points

The SmallRig Cage 4422 offers a variety of mounting points for attaching accessories, expanding your camera's versatility:

• 1/4''-20 & 3/8''-16 Threaded Holes: Located throughout the cage, these standard mounting points are compatible with various accessories such as top handles (e.g., SmallRig 3765), side handles (e.g., SmallRig 4346), and magic arms.
• 3/8"-16 Locating Hole for ARRI: This specific hole is designed for ARRI-standard accessories, such as monitor mounts (e.g., SmallRig 2903B), providing anti-twist security.
• Cold Shoe Mounts: Integrated cold shoe mounts allow for direct attachment of accessories like LED lights (e.g., SmallRig 4055) or microphones.
• NATO Rail: A NATO rail is included for quick attachment and detachment of NATO-compatible accessories, such as top handles (e.g., SmallRig 4345).
• Bottom QD Socket: A Quick Detach (QD) socket is provided on the bottom for easily attaching shoulder straps.
• M4 Threaded Holes (Bottom Front): These holes are compatible with the Horizontal-to-Vertical Mount Plate 4424, enabling quick switching between horizontal and vertical shooting orientations.

Olusin 6: Pariview of the diverse mounting options available on the cage.

3. Quick Release Plate for Arca-Swiss

The cage features a built-in quick release plate compatible with Arca-type systems. This allows for rapid transitions between handheld shooting, tripod mounting, and stabilizer setups.

• Ibamu: The Arca-type plate is compatible with tripods and gimbals that support the Arca-Swiss standard, including DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers and DJI RS 2 / RSC 2 gimbals quick-release plates (e.g., SmallRig Quick Release Plate for Arca-Type 3154).

Figure 7: Seamless transitions between different shooting setups using the integrated Arca-Swiss plate.

Olusin 8: Examples of multiple usage scenarios for the SmallRig Cage Kit, demonstrating its versatility.

Itoju

Láti rí i dájú pé SmallRig Cage Kit rẹ pẹ́ tó àti pé ó ń ṣiṣẹ́ dáadáa, tẹ̀lé àwọn ìlànà ìtọ́jú wọ̀nyí:

• Ninu: Fi aṣọ rírọrùn àti gbígbẹ nu àgò náà láti mú eruku àti ìka ọwọ́ kúrò. Fún eruku líle, lo ẹ̀rọ díẹ́ díẹ̀.amp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents that could damage the finish.
• Ibi ipamọ: Store the cage in a dry, cool place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure it is clean and free of moisture.
• Ayewo: Periodically check all screws and mounting points for tightness. Re-tighten if necessary to maintain stability and prevent accidental camera detachment.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

SmallRig products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official SmallRig webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.

Osise Webojula: www.smallrig.com