Ọrọ Iṣaaju
The BUVAYE BN03 Car Jump Starter with Air Compressor is a versatile and essential tool for vehicle owners. Designed for 12-volt vehicles, it features a powerful 4000A peak current capable of jump-starting gasoline engines up to 10 liters and all diesel engines. Beyond jump-starting, it integrates a 150 PSI air compressor for tire inflation, an emergency power bank for charging mobile devices, and multiple LED light modes for various situations. This device is built with 10 safety protections to ensure secure operation in diverse conditions, from extreme cold to high temperatures.
Ohun ti o wa ninu Apoti
Upon unboxing your BUVAYE BN03, you will find the following components:
- 1 × Jump Starter with Air Compressor
- 1 × Heavy-Duty Battery Jumper Cables
- 1 × Detachable Air Hose
- 4 × Gas Nozzles (Presta to Schrader adapter, needle adapter, short tapered nozzle, long tapered nozzle)
- 1 × USB-C okun gbigba agbara
- 1 × Ilana itọnisọna
- 1 × EVA Carrying Case
Ṣeto
Gbigba agbara ni ibẹrẹ
Before first use, or if the device has been stored for an extended period, ensure the jump starter is fully charged. Connect the included USB-C charging cable to the USB-C input port on the device and plug the other end into a suitable USB power adapter (not included). The LCD display will indicate the charging status. It is recommended to keep the battery starting power above 50% for optimal performance.
Idanimọ paati
Familiarize yourself with the main components and controls of the device:
- Agbara Yi pada: Yipada ẹrọ si tan/pa.
- Air Pressure + / -: Adjusts target air pressure for inflation.
- Pressure Unit Adjustment: Cycles through PSI, BAR, KPA, Kg/cm².
- LED Flashlight Switch: Activates and cycles through flashlight, SOS, and strobe modes.
- Ijade USB-A: Fun gbigba agbara awọn ẹrọ ita.
- Ibudo Iwọle USB-C: Fun gbigba agbara ibẹrẹ fo.
- Smart Clip Socket: Connects the smart jumper cables.
- Inflator Hose Socket: Connects the detachable air hose.
- Rere Clamp (pupa): Connects to the positive (+) terminal of the battery.
- Odi Clamp (dudu): Connects to the negative (-) terminal of the battery.
- Ibudo Ibẹrẹ Fo: Connects to the smart jumper cables.
Awọn ilana Iṣiṣẹ
Fo Bibẹrẹ Ọkọ
Tẹle awọn igbesẹ wọnyi lati fo ọkọ rẹ bẹrẹ lailewu:
- Igbesẹ 1: Insert the Smart Clip into the Jump Starter's jump start port. Ensure a secure connection.
- Igbesẹ 2: So rere pupa (+) clamp to the positive (+) terminal of the vehicle's dead battery. Connect the black negative (-) clamp to the negative (-) terminal of the vehicle's dead battery. The smart cables will auto-detect the connection.
- Igbesẹ 3: Once the indicator light on the smart clip turns green, start your car engine.
- Igbesẹ 4: After the engine starts, immediately remove the clamps from the car battery, then disconnect the smart clip from the jump starter.
Official product video demonstrating the jump-starting and inflation capabilities of the BUVAYE BN03. This video shows the device in action, highlighting its ease of use for starting vehicles and inflating tires.
Inflating Tires and Other Devices
The integrated air compressor can inflate car tires, bicycle tires, motorcycle tires, sports balls, and more.
- Igbesẹ 1: Connect the air hose to the valve of the tire or device you wish to inflate. Ensure it is securely screwed on.
- Igbesẹ 2: Press and hold the power button (often indicated by a "M" or similar icon) for 2 seconds to turn on the device. The LCD display will show the current pressure.
- Igbesẹ 3: Long press the "O" button to switch between inflation modes (car, motorcycle, bicycle, ball). Short press the "O" button to select the desired pressure unit (PSI, BAR, KPA, Kg/cm²).
- Igbesẹ 4: Press the "+" and "-" buttons to preset the desired pressure value.
- Igbesẹ 5: Press the power button (often indicated by a "M" or similar icon) again to start the inflation pump. The pump will automatically stop once the preset pressure is reached.
Lilo bi Bank Power
The BUVAYE BN03 can serve as a portable power bank to charge your electronic devices.
- Connect your device's charging cable to the USB-A output port on the jump starter.
- Ibẹrẹ fo yoo bẹrẹ laifọwọyi gbigba agbara ẹrọ rẹ.
Lilo Imọlẹ LED
The built-in LED light offers three modes for various emergency or outdoor situations.
- Press the LED flashlight switch button once for constant illumination (Flashlight mode).
- Press it again to activate the SOS signal mode.
- Press it a third time for Strobe mode.
- Press it a fourth time to turn off the light.
Itoju
- Gbigba agbara deede: To maintain battery health and ensure readiness, charge the jump starter every two months, especially if not used for a long time.
- Isakoso iwọn otutu: If the product becomes very hot during use (e.g., during prolonged tire inflation), allow it to cool down for at least 10 minutes before continuing operation.
- Ibi ipamọ: Store the device in a cool, dry place. Avoid leaving it in extreme temperatures (very hot or very cold environments) for extended periods, as this can negatively impact the lithium battery's lifespan and performance.
- Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ẹ̀rọ náà. Má ṣe lo àwọn kẹ́míkà líle tàbí àwọn ohun ìfọmọ́ tí ó máa ń pa ara.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ko tan. | Batiri naa ti jade patapata. | Charge the jump starter fully using the USB-C cable. |
| Ọkọ ko ni fo bẹrẹ. | Ti ko tọ clamp connection; Jump starter battery too low; Vehicle battery severely damaged. | Rii daju clamps are connected correctly (red to +, black to -). Check jump starter battery level (should be >50%). Consult a mechanic if vehicle battery is faulty. |
| Afẹ́fẹ́ kì í fẹ́ tàbí kí ó dúró ní àkókò tí kò tó. | Hose not securely connected; Preset pressure reached; Device overheating. | Ensure air hose is tightly screwed on to the valve. Check preset pressure. Allow device to cool down if hot. |
| LCD display is not working or flickering. | Low battery; Internal malfunction. | Charge the device. If problem persists, contact customer support. |
| Device gets hot during inflation. | Iṣiṣẹ deede lakoko lilo igba pipẹ. | This is normal. Allow the device to cool for 10 minutes if it becomes very hot before continuing. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | BUVAYE |
| Awoṣe | BN03 |
| Oke Ijade Lọwọlọwọ | 4000 Amps |
| Applicable Engine Type | All Gas (up to 10L), All Diesel (up to 5L) |
| Air Compressor Ipa | Up to 150 PSI (35L/Min) |
| Batiri Iru | Litiumu Ion (awọn batiri 4 wa ninu rẹ) |
| Awọn iwọn otutu ti nṣiṣẹ | -4℉ si 140℉ (-20℃ si 60℃) |
| Awọn iwọn (L x W x H) | 6.9 x 1.9 x 3.7 inches (17.5 x 4.8 x 9.4 cm) |
| Iwọn Nkan | 2.75 iwon |
| Awọn Idaabobo Aabo | Over-charge, Over-current, Short-circuit, Reverse-polarity, Low-temp, High-temp, Over-voltage, Over-load, Spark-proof, Reverse-charge |
Atilẹyin ọja ati Support
BUVAYE offers a 1-year product quality maintenance akoko ati s'aiye imọ support for the BN03 Car Jump Starter. For any questions, concerns, or technical assistance, please feel free to contact BUVAYE customer support. Refer to the contact information provided in the product packaging or on the official BUVAYE webojula.
