SILVERCREST SLE 200 B2 Dehumidifier User Manual

1. Ifihan

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your SILVERCREST SLE 200 B2 Dehumidifier. Please read these instructions carefully before using the appliance and retain them for future reference.

The SILVERCREST SLE 200 B2 is designed to reduce humidity levels in indoor environments, helping to prevent mold, mildew, and other moisture-related issues. It features a dehumidification capacity of up to 10 liters per 24 hours, two operating programs, and a 2.1-liter water tank.

2. Awọn ilana aabo

Máa tẹ̀lé àwọn ìlànà ààbò wọ̀nyí láti dín ewu ìkọlù iná mànàmáná, iná, tàbí ìpalára kù:

• Rii daju pe ipese agbara voltage matches the rating label on the appliance (220-240V).
• Ma ṣe ṣiṣiṣẹ dehumidifier pẹlu okun agbara ti bajẹ tabi plug.
• Keep the appliance away from water and other liquids. Do not immerse it.
• Do not block the air inlet or outlet vents. Maintain adequate clearance around the unit.
• Yọọ ohun elo ṣaaju ṣiṣe mimọ, itọju, tabi nigbati ko si ni lilo.
• Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan (pẹlu awọn ọmọde) pẹlu idinku ti ara, imọlara, tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn. .
• Má ṣe lo ohun èlò náà ní àwọn ibi tí a kó àwọn gáàsì tàbí omi tí ó lè jóná sí.
• Always transport the unit in an upright position.

3. Ọja Ipariview

Mọ ararẹ pẹlu awọn paati ti dehumidifier rẹ.

Aworan 1: Iwaju view of the SILVERCREST SLE 200 B2 Dehumidifier, showing the air intake grille, control panel on top, and the water tank with a visible water level window on the lower front.

3.1 Main irinše

• Ibi iwaju alabujuto: Ti o wa ni oke ti ẹrọ naa fun ṣiṣeto awọn iṣẹ.
• Atẹgun Inlet Grille: Front-facing grille where air enters for dehumidification.
• Oju-afẹfẹ: Top-facing vent where dry air is expelled.
• Omi omi: Removable tank at the bottom front for collecting condensed water. Features a water level window and overflow protection.
• Ibudo Idomi Ti nlọ lọwọ: Located at the rear for connecting a drainage hose.
• Asẹ afẹfẹ: Washable filter located behind the air inlet grille.
• Transport Casters: Four wheels at the base for easy movement.
• Ọwọ Gbigbe: Foldable handle on top for portability.

3.2 Iṣakoso igbimo

Aworan 2: Sun mo tipetipe view of the control panel on the top of the dehumidifier, showing buttons for power, mode selection, humidity adjustment, and a digital display.

Igbimọ iṣakoso pẹlu:

• Bọ́tìnì Agbára (⏻): Yipada ẹyọ naa tan tabi pa.
• Mode Button (💧 / 👕): Selects between Dehumidification and Laundry Drying programs.
• Humidity Adjustment Buttons (- / +): Adjusts the target humidity level.
• Bọ́tìnì Aago (⏱): Ṣeto aago iṣẹ.
• Ifihan Digital: Ó ń fi ọriniinitutu lọwọlọwọ, ọriniinitutu afojusun, tabi eto aago han.
• Awọn imọlẹ Atọka: For full water tank, defrosting, and selected mode.

4. Eto

4.1 Ṣiṣii ati Gbe

1. Farabalẹ yọ dehumidifier kuro ninu apoti rẹ.
2. Place the unit on a firm, level surface in an upright position.
3. Ensure there is at least 20 cm (8 inches) of clear space around all sides of the unit for proper airflow. Do not place it against a wall or furniture that could obstruct the air vents.
4. If the unit was not stored upright, allow it to stand upright for at least 2 hours before plugging it in.

4.2 Asopọ agbara

Plug the power cord into a grounded electrical outlet (220-240V).

4.3 Continuous Drainage Setup (Optional)

For continuous operation without needing to empty the water tank, you can connect the provided drainage hose.

Aworan 3: Ẹyìn view of the dehumidifier, showing the fan grille, power cord storage, and the continuous drainage port with the included hose and stopper.

1. Locate the continuous drainage port at the rear of the unit.
2. Remove the rubber stopper from the drainage port.
3. Connect the provided drainage hose (approximately 30 cm) to the port. Ensure it is securely attached.
4. Direct the other end of the hose to a suitable drain or container, ensuring the hose is sloped downwards to allow water to flow freely by gravity.
5. If using a longer garden hose, ensure it has an appropriate diameter and connection.

5. Awọn ilana Iṣiṣẹ

5.1 Agbara Tan / Pa

Tẹ awọn Power Button (⏻) on the control panel to turn the dehumidifier on or off.

5.2 Yiyan Ipo Ṣiṣẹ

Tẹ awọn Mode Button (💧 / 👕) to cycle between the available programs:

• Dehumidification Mode (💧): The unit will operate to reach and maintain a set target humidity level.
• Laundry Drying Mode (👕): The unit operates continuously at a high fan speed to quickly dry laundry. In this mode, the target humidity cannot be set.

5.3 Setting Target Humidity (Dehumidification Mode Only)

In Dehumidification Mode:

1. Lo awọn Humidity Adjustment Buttons (- / +) to set your desired humidity level.
2. The target humidity can be set between 30% and 80% relative humidity (RH) in 5% increments.
3. The unit will operate until the ambient humidity reaches the set target, then it will cycle on and off to maintain that level.

5.4 Aago Išė

The timer function allows you to set a duration for the dehumidifier to operate before automatically turning off.

1. Tẹ awọn Timer Button (⏱). The display will show 'Hr'.
2. Lo awọn Humidity Adjustment Buttons (- / +) to set the desired operating duration in hours (e.g., 1-24 hours).
3. The timer will start counting down. The unit will turn off automatically once the set time has elapsed.

5.5 Full Water Tank Warning

When the water tank is full, the unit will automatically stop operating, and an indicator light will illuminate. An audible warning signal may also sound. Empty the water tank to resume operation.

6. Itọju

Itọju deede ṣe idaniloju iṣẹ ṣiṣe ti o dara julọ ati fa gigun igbesi aye ti dehumidifier rẹ.

6.1 Sofo ati Cleaning awọn Omi ojò

Aworan 4: The dehumidifier with its water tank partially pulled out, illustrating how to access and remove the tank for emptying or cleaning.

1. Ensure the dehumidifier is turned off and unplugged.
2. Fi pẹ̀lẹ́pẹ̀lẹ́ fa ojò omi náà jáde láti iwájú ẹ̀rọ náà.
3. Sofo omi ti a gba.
4. Clean the tank with mild detergent and water periodically to prevent mold and bacteria growth. Rinse thoroughly.
5. Reinsert the clean water tank firmly into the unit until it clicks into place.

6.2 Ninu Ajọ Afẹfẹ

A gbọ́dọ̀ máa fọ àlẹ̀mọ́ afẹ́fẹ́ déédéé (fún àpẹẹrẹ, ní gbogbo ọ̀sẹ̀ méjì tàbí bí ó bá ṣe pàtàkì) láti lè máa ṣiṣẹ́ dáadáa.

1. Pa a kuro ki o yọọ kuro ni ẹrọ mimu kuro.
2. Locate the air filter behind the front air inlet grille.
3. Yọ àlẹmọ kuro.
4. Nu àlẹmọ pẹlu ẹrọ igbale tabi fi omi ṣan ni rọra wẹ pẹlu ọṣẹ tutu.
5. Allow the filter to air dry completely before reinserting it. Do not use the unit without the filter or with a wet filter.

6.3 Iṣẹ́ Yíyọ́ Àìfọwọ́ṣe

The dehumidifier is equipped with an automatic defrost function. If frost builds up on the evaporator coils, the unit will temporarily stop dehumidifying and run the fan to melt the frost. This is a normal operation and does not require user intervention. The defrost indicator light will illuminate during this process.

6.4 Ibi ipamọ

Ti o ba tọju ẹyọ naa fun igba pipẹ:

1. Ṣofo ati nu omi ojò.
2. Mọ àlẹmọ afẹfẹ.
3. Ensure the unit is completely dry inside.
4. Fi ipari si okun agbara daradara.
5. Tọ́jú ẹ̀rọ ìtútù sí ibi tí ó dúró ṣánṣán ní ibi tí ó tutù tí ó sì gbẹ, tí kò sí ìmọ́lẹ̀ oòrùn tààrà àti igbóná tó le koko.

7. Laasigbotitusita

Ṣaaju ki o to kan si atilẹyin alabara, jọwọ wo tabili atẹle yii fun awọn ọran ati awọn solusan ti o wọpọ:

8. Imọ ni pato

9. Atilẹyin ọja ati Support

Information regarding specific warranty terms and customer support contacts is not available in the provided product details. Please refer to the documentation included with your purchase or contact the retailer for warranty claims and technical assistance.