YUHANUS 600lb Magnetic Lock Kit Door Access Control System User Manual

1. Ifihan

This manual provides detailed instructions for the installation, configuration, and operation of the YUHANUS 600lb Magnetic Lock Kit Door Access Control System. This system is designed to enhance security for various entry points, offering multiple access methods including NFC, RFID cards, keypad codes, and remote control. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

2. Ọja irinše

The YUHANUS 600lb Magnetic Lock Kit Door Access Control System includes the following components:

Nọmba 2.1: Pariview of the YUHANUS Door Access Control System components, including the keypad, magnetic lock, power supply, exit button, doorbell, and remote controls.

• Access Control Keypad: A waterproof NFC/RFID keypad for secure entry via code, card, or NFC-enabled smartphone.
• 600lb Electric Magnetic Lock: Provides strong locking force for enhanced door security.
• Ibi ti ina elekitiriki ti nwa: Converts AC power to DC 12V for system operation.
• Touch Exit Button: Allows for convenient exit from the secured area.
• Doorbell Chime: An indoor unit that sounds when the doorbell button on the keypad is pressed.
• Remote Control with Receiver: Enables remote unlocking of the door.
• RFID Cards/NFC Tags: For card-based access.

Nọmba 2.2: The waterproof NFC RFID keypad, featuring a numeric touch interface and doorbell icon.

Nọmba 2.3: The 600lb electric magnetic lock with its armature plate, showing dimensions for installation.

Nọmba 2.4: The power supply unit, indicating input (AC 110V-240V) and output (DC 12V) connections.

Nọmba 2.5: The touch-sensitive exit button with an illuminated 'EXIT' label.

Nọmba 2.6: The indoor doorbell chime unit with its wiring connections.

3. Eto ati fifi sori

Proper installation is crucial for the reliable operation of your access control system. It is recommended that installation be performed by a qualified technician.

3.1. Gbogbogbo Awọn Itọsọna fifi sori ẹrọ

• Ensure all power is disconnected before beginning installation.
• Mount components securely to appropriate surfaces.
• Follow all local electrical codes and safety regulations.
• Keep wiring organized and protected from damage.

3.2. System Loriview Aworan atọka

Nọmba 3.1: Ipariview diagram illustrating the typical placement of the keypad, magnetic lock, power supply, exit button, doorbell, and remote control receiver relative to a door.

3.3. Aworan aworan

Refer to the following wiring diagram for connecting all components of the access control system. Incorrect wiring can damage the system or pose a safety hazard.

Nọmba 3.2: Comprehensive wiring diagram showing connections between the access control keypad, power supply, magnetic lock, exit switch button, remote control receiver, and doorbell.

3.3.1. Keypad Wiring

• Pupa: +12V DC Power Input
• Dudu: GND (Ilẹ)
• Yellow: PUSH (Connects to power supply PUSH terminal)
• Bell (Pink+White): Connects to Doorbell Chime BELL terminals.

3.3.2. Agbara Ipese Waya

• AC 110V-220V: Connect to main power source.
• + 12V: Connect to Keypad Red wire, Magnetic Lock +12V, Remote Control V+.
• GND: Connect to Keypad Black wire, Magnetic Lock GND, Remote Control V-.
• TI: Connect to Keypad Yellow wire.
• CTRL+: Connect to Exit Switch Button +12V.
• CTRL-: Connect to Exit Switch Button GND.
• NO/NC/COM: For magnetic lock connection (refer to lock type for NO/NC).

3.3.3. Magnetic Lock Wiring

• Connect to the appropriate NO/NC/COM terminals on the power supply based on your desired lock state (fail-safe or fail-secure).

3.3.4. Exit Switch Button Wiring

• Connect to CTRL+ and CTRL- terminals on the power supply.

3.3.5. Remote Control Receiver Wiring

• V+: Connect to Power Supply +12V.
• V-: Connect to Power Supply GND.
• NO/NC/COM: Connect to the appropriate terminals on the power supply for remote unlock functionality.

4. Awọn ilana Iṣiṣẹ

This section details how to program and operate your access control system.

4.1. Keypad Siseto

The keypad allows for adding and deleting user codes and RFID cards.

4.1.1. Titẹ awọn siseto Ipo

1. Tẹ * (Star) bọtini.
2. Enter the default master password (usually 123456 or 888888, refer to specific keypad manual if different).
3. Tẹ # (Hash) key. The indicator light will change, confirming entry into programming mode.

4.1.2. Fifi Awọn Koodu Olumulo kun

1. Ni ipo siseto, tẹ 1.
2. Enter a 4-6 digit user code.
3. Tẹ # to confirm. Repeat for additional codes.

4.1.3. Adding RFID Cards/NFC Tags

1. Ni ipo siseto, tẹ 2.
2. Present the RFID card or NFC-enabled smartphone to the keypad.
3. The keypad will beep to confirm the card has been added. Repeat for additional cards.

4.1.4. Exiting Programming Mode

• Tẹ * lati jade kuro ni ipo siseto.

4.2. Access Methods

• Akọsilẹ koodu: Enter your programmed user code on the keypad, then press #.
• Card/NFC Entry: Present your programmed RFID card or NFC-enabled smartphone to the keypad.
• Isakoṣo latọna jijin: Tẹ bọtini ṣiṣi silẹ lori iṣakoso latọna jijin.
• Bọtini Jade: Press the touch exit button from inside to unlock the door.

4.3. Doorbell Išė

• To use the doorbell, visitors press the bell icon on the keypad. The indoor doorbell chime will sound.

5. Itọju

Regular maintenance ensures the longevity and optimal performance of your access control system.

• Ninu: Wipe the keypad and other external components with a soft, damp asọ. Yago fun abrasive ose tabi epo.
• Ṣayẹwo Asopọmọra: Periodically inspect all wiring connections to ensure they are secure and free from corrosion or damage.
• Magnetic Lock: Ensure the magnetic lock and armature plate are clean and free of debris to maintain full holding force.
• Idanwo Iṣẹ ṣiṣe: Regularly test all access methods (code, card, remote, exit button) to confirm proper operation.

6. Laasigbotitusita

If you encounter issues with your access control system, refer to the following common problems and solutions:

Ti iṣoro naa ba wa lẹhin igbiyanju awọn iṣeduro wọnyi, jọwọ kan si atilẹyin alabara.

7. Awọn pato

Key technical specifications for the YUHANUS 600lb Magnetic Lock Kit Door Access Control System:

8. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation included with your purchase or contact YUHANUS customer service directly. Ensure you have your product model number and purchase details available when seeking support.

Olupese: Shenzhen YuHan International Business Co.,Ltd.