Ìwé Ìtọ́ni fún Ìmọ́tótó Adágún Oníróbọ́ọ̀tì Lydsto P1

1. Ifihan

Thank you for choosing the Lydsto Robotic Pool Cleaner P1. This advanced automatic pool vacuum is designed to provide ultimate cleaning performance for in-ground pools up to 60 feet. Featuring wall climbing capabilities, a high-precision IMU sensor, and a triple roller brush system, the P1 ensures thorough cleaning of your pool's floor, walls, and waterline. Please read this manual carefully before operation to ensure proper use, maintenance, and longevity of your device.

The Lydsto Robotic Pool Cleaner P1, shown alongside a smartphone displaying its control application. This image highlights the modern design of the cleaner and its smart control capabilities.

2. Awọn Ilana Aabo pataki

Láti dín ewu ìpalára tàbí ìbàjẹ́ kù, kíyèsí àwọn ìlànà ààbò wọ̀nyí:

• Always disconnect the power supply from the electrical outlet before performing any service, cleaning, or maintenance on the cleaner.
• Do not operate the cleaner if the power cable is damaged. Contact Lydsto customer support for replacement.
• Ensure the power outlet is protected by a Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD).
• Do not allow children to play with the cleaner. Supervise children when the cleaner is in use.
• The cleaner is designed for pool use only. Do not use it for other purposes.
• Do not operate the cleaner out of water. This can damage the motor seals.
• Only use the original power supply unit provided with the cleaner.
• Keep the power supply unit away from water and direct sunlight.
• Do not attempt to repair the cleaner yourself. Refer all servicing to qualified personnel.
• Ensure the pool water temperature is within the recommended operating range (typically 50°F - 95°F / 10°C - 35°C).

3. Package Awọn akoonu

Upon unpacking your Lydsto P1 Robotic Pool Cleaner, please verify that all components are present and in good condition:

• Lydsto P1 Robotic Pool Cleaner Unit
• Agbara Ipese Unit
• Floating Power Cable
• Filter Basket (pre-installed)
• Afowoyi Olumulo (iwe-ipamọ yii)

If any items are missing or damaged, please contact Lydsto customer support immediately.

4. Eto ati Ibẹrẹ Lilo

4.1 Ṣiṣii ati Gbe

1. Carefully remove the cleaner and all accessories from the packaging.
2. Place the power supply unit at least 12 feet (3.5 meters) from the edge of the pool. Ensure it is in a shaded area and protected from direct sunlight and splashing water.
3. Uncoil the floating power cable completely.

4.2 Nsopọ Ipese Agbara

1. Connect the floating power cable to the cleaner unit. Ensure a secure connection.
2. Connect the other end of the floating power cable to the power supply unit.
3. Plug the power supply unit into a grounded electrical outlet (GFCI/RCD protected).

4.3 Placing the Cleaner in the Pool

1. Gently lower the cleaner into the pool. Hold it by the handle and allow it to sink to the bottom.
2. Ensure all trapped air escapes from the cleaner. Gently rock it from side to side if necessary until no more air bubbles are visible.
3. Spread the floating power cable evenly across the pool surface to prevent tangling.

4.4 Initial App Connection (Optional)

The Lydsto P1 can be controlled via a smartphone application.

1. Download the "Lydsto" app from your device's app store (iOS App Store or Google Play Store).
2. Follow the in-app instructions to create an account and pair your Lydsto P1 cleaner. This typically involves scanning a QR code on the cleaner or power supply, or connecting via Bluetooth/Wi-Fi.
3. Once connected, you can monitor cleaning status, select cleaning modes, and schedule cleaning cycles.

The Lydsto app provides real-time control and monitoring of your pool cleaner, allowing you to manage cleaning tasks from your smartphone.

5. Ṣiṣẹ Isenkanjade

5.1 Bibẹrẹ a Cleaning ọmọ

Once the cleaner is properly submerged and connected to power, you can start a cleaning cycle:

• Ibẹrẹ Afowoyi: Press the power button on the power supply unit. The cleaner will begin its default cleaning cycle.
• Ohun elo Iṣakoso: Open the Lydsto app on your smartphone. Select the desired cleaning mode (e.g., Floor, Wall, All) and initiate the cleaning cycle.

5.2 Ninu Awọn ipo ati Awọn ẹya ara ẹrọ

The Lydsto P1 offers various cleaning modes and intelligent features for comprehensive pool cleaning:

• Fifọ ilẹ: Focuses on cleaning the pool floor, effectively picking up sand, leaves, and debris.
• Wall Climbing: The cleaner is capable of climbing pool walls to scrub and clean the vertical surfaces.
• Waterline Scrubbing: A dedicated mode to clean the waterline, where dirt and grime often accumulate.
• Step Climbing: The P1 can navigate and clean pool steps.
• P-Smart 2.0 Algorithm: Utilizes an intelligent navigation system to create an efficient bow-shaped cleaning path, ensuring maximum coverage and avoiding missed spots.
• Triple Roller Brush System: Equipped with three powerful roller brushes for superior scrubbing and debris collection.
• High-Precision IMU Sensor: Enhances navigation and mapping for optimal cleaning efficiency.

The Lydsto P1's versatile cleaning capabilities, including wall climbing, waterline scrubbing, and step climbing, ensure a comprehensive clean.

The P-Smart 2.0 Algorithm optimizes the cleaning path for efficient and thorough coverage of the pool floor.

The triple brush system provides strong scrubbing capability, effectively picking up sand, leaves, and other debris.

The Lydsto P1 delivers unparalleled cleaning performance with powerful suction, capable of handling various types of pool debris.

5.3 Ending a Cleaning Cycle

The cleaner will automatically stop after completing its cycle. To manually stop the cleaner:

• Press the power button on the power supply unit.
• Use the "Stop" function within the Lydsto app.

Once stopped, gently pull the cleaner out of the pool using the floating cable or handle. Do not pull it out by the power cord.

6. Itọju ati Itọju

Regular maintenance ensures optimal performance and extends the lifespan of your Lydsto P1 cleaner.

6.1 Ninu Agbọn Ajọ

The filter basket should be cleaned after each cleaning cycle or when visibly full.

1. Disconnect the power supply from the electrical outlet.
2. Yọ awọn regede lati pool.
3. Locate the filter basket access points (usually on the top or side of the cleaner).
4. Open the latches or covers and remove the filter basket. The Lydsto P1 features a 2x3L large filter basket for easy access.
5. Empty the debris from the basket.
6. Rinse the filter basket thoroughly with a garden hose until all debris and fine particles are removed.
7. Reinsert the clean filter basket into the cleaner and secure the latches/covers.

The Lydsto P1 features an easy-access, large-capacity debris filter basket for convenient cleaning.

6.2 Cleaning the Brushes and Tracks

Periodically inspect the roller brushes and tracks for any tangled hair, string, or large debris. Remove any obstructions to ensure smooth operation.

6.3 Proper Storage

When not in use for extended periods, or during off-season:

• Clean the cleaner thoroughly, including the filter basket.
• Drain all water from the cleaner.
• Coil the floating power cable neatly.
• Store the cleaner and power supply unit in a cool, dry, and shaded area, away from direct sunlight and freezing temperatures.

7. Laasigbotitusita

If you encounter issues with your Lydsto P1, refer to the following common problems and solutions:

For issues not listed above, or if solutions do not resolve the problem, please contact Lydsto customer support.

8. Awọn pato

The Lydsto P1 is equipped with a high-performance motor, contributing to its powerful suction and efficient filtration.

9. Atilẹyin ọja ati Onibara Support

9.1 atilẹyin ọja Alaye

The Lydsto Robotic Pool Cleaner P1 comes with a 1-odun atilẹyin ọja from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.

9.2 Onibara Support

For technical assistance, troubleshooting, warranty claims, or to purchase replacement parts, please contact Lydsto customer support.

• Atilẹyin Ayelujara: Ṣabẹwo si Lydsto osise webojula tabi Amazon Brand itaja fun FAQs ati alaye olubasọrọ. Lydsto Amazon Store
• Imeeli Atilẹyin: Refer to your product packaging or the Lydsto webojú òpó wẹ́ẹ̀bù fún àdírẹ́sì ìmeeli tuntun jùlọ.

Please have your model number (P1) and purchase date ready when contacting support.

The Lydsto P1 supports Over-The-Air (OTA) firmware upgrades, allowing for continuous optimization and improved performance.