Ọrọ Iṣaaju
The Volkano VK-6301 Drizzle Series Weather Station is a wireless device designed to provide accurate and up-to-date weather information. It features a large, easy-to-read display that shows indoor and outdoor temperature, humidity, and atmospheric pressure. Additionally, it provides a weather forecast, current time, and date. The system includes an outdoor sensor unit that wirelessly transmits environmental data to the main indoor display unit.
Package Awọn akoonu
- Volkano Drizzle Series Main Display Unit
- Wireless Outdoor Sensor Unit
- Okun Agbara USB
- Itọsọna olumulo
Key Awọn ẹya ara ẹrọ
- Wireless weather station with an outdoor sensor unit.
- Large, easy-to-read display showing indoor and outdoor temperature, humidity, and pressure.
- Displays weather forecast, current time, and date.
- Outdoor sensor unit can be placed up to 100 meters away from the indoor display unit.
Awọn ilana iṣeto
1. Main Display Unit Setup
- Asopọ agbara: Connect the provided USB power cable to the main display unit and plug the other end into a suitable USB power adapter (not included) or a powered USB port. The unit will power on and the display will illuminate.
- Awọn Eto Ibẹrẹ: Upon first power-up, the unit may prompt you to set the time, date, and measurement units (Celsius/Fahrenheit). Use the control buttons (typically located on the back or side) to adjust these settings. Refer to the 'Operating Instructions' section for detailed button functions.
2. Wireless Outdoor Sensor Unit Setup
- Fifi sori batiri: Open the battery compartment on the back of the outdoor sensor unit. Insert 2x AAA batteries (not included), ensuring correct polarity (+/-). Close the compartment securely.
- Ibi: Position the outdoor sensor in a shaded area, protected from direct sunlight and rain, to ensure accurate temperature and humidity readings. Ensure it is within 100 meters of the main display unit and free from major obstructions that could interfere with the wireless signal.
- Pipọpọ: The outdoor sensor should automatically pair with the main display unit within a few minutes. If the outdoor readings do not appear, press the 'SYNC' or 'CHANNEL' button on the main unit (refer to specific button layout) to initiate a manual search for the sensor.
Awọn ilana Iṣiṣẹ
Ifihan Loriview
Ẹrọ ifihan akọkọ n pese okeerẹ lori okeerẹview ti awọn ipo oju ojo lọwọlọwọ ati alaye akoko:
- Akoko ati Ọjọ: Displays the current time (12/24-hour format) and date.
- Iwọn inu ile & Ọriniinitutu: Shows the temperature and relative humidity measured by the main unit.
- Iwọn otutu ita gbangba & Ọriniinitutu: Shows the temperature and relative humidity transmitted from the wireless outdoor sensor.
- Atẹgun Ayika: Displays the current barometric pressure.
- Àfojúsùn ojú ọjọ: An icon-based forecast (e.g., sunny, cloudy, rainy) predicts upcoming weather conditions based on pressure changes.
- Alakoso Oṣupa: Tọkasi ipele lọwọlọwọ ti oṣupa.
Button Functions (General)
While specific button labels may vary, most weather stations include the following common functions:
- Ipo/Ṣeto: Ti a lo lati tẹ ipo eto sii ati jẹrisi awọn aṣayan.
- UP/DOWN (or +/-): Used to adjust values during settings or to toggle between display modes (e.g., min/max temperature).
- IKỌ: To set or activate/deactivate alarms.
- SNOOZE / LIGHT: To temporarily silence an alarm or activate the backlight.
- CHANNEL/AṢỌRỌWỌRỌ: To switch between multiple outdoor sensors (if supported) or manually initiate sensor pairing.
- C/F: To switch between Celsius and Fahrenheit temperature units.
Refer to the specific button layout on your device for exact functions and sequences.
Itoju
- Ninu: Mu ese ifihan ati sensọ ita gbangba nu pẹlu asọ, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the surfaces.
- Battery Replacement (Outdoor Sensor): When the battery indicator on the main display shows low battery for the outdoor sensor, replace the batteries promptly to ensure continuous data transmission. Use fresh AAA batteries.
- Placement Check: Periodically check the outdoor sensor's placement to ensure it remains protected from extreme weather and maintains a clear signal path to the main unit.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si ifihan lori akọkọ kuro. | Power cable not connected or faulty. | Ensure USB power cable is securely connected and power adapter is working. |
| A ko fihan iwọn otutu/ọrinrin ita gbangba. | Outdoor sensor batteries low or dead; sensor out of range; interference; sensor not paired. | Replace sensor batteries. Move sensor closer to main unit. Reduce interference sources. Manually re-pair sensor (refer to 'Setup Instructions'). |
| Inaccurate outdoor readings. | Sensọ tí a fi sí ojú oorun taara tabi òjò. | Gbe sensọ naa lọ si agbegbe ti o ni iboji, ti o ni aabo. |
| Asọtẹlẹ oju-ọjọ dabi pe ko tọ. | Forecast is based on local atmospheric pressure changes, not satellite data. | Understand that the forecast is a local prediction and may not always match official forecasts. Allow time for the unit to calibrate. |
Awọn pato
- Awoṣe: VK-6301-WT
- Brand: Volkano
- Iwọn Alailowaya: Titi di mita 100 (afẹfẹ ita gbangba)
- Power (Main Unit): Okun Agbara USB
- Power (Outdoor Sensor): Awọn batiri 2x AAA (kii ṣe pẹlu)
- Ifihan: Large, easy-to-read color display
- Awọn iṣẹ: Indoor/Outdoor Temperature, Indoor/Outdoor Humidity, Atmospheric Pressure, Weather Forecast, Time, Date, Moon Phase
- Awọn iwọn (Apapọ): Isunmọ 24.2 x 20.4 x 12.2 cm
- Ìwọ̀n Nkan: O fẹrẹ to 540 g
Atilẹyin ọja ati Support
All Volkano products are covered by a 1-odun lopin agbegbe and lifetime customer support. You can extend your coverage by registering your product to receive an additional 12-month extension, totaling 24 months of coverage by Volkano.
For support with products or services, please message us via the official Volkano Page or visit the Volkano webojula fun alaye olubasọrọ.
