XBrand 3-Tier Water Fountain (Model HD400) Instruction Manual

1. Ifihan

Thank you for choosing the XBrand 3-Tier Water Fountain, Model HD400. This elegant freestanding water feature is designed to enhance your outdoor living space with the soothing sounds of flowing water. Constructed from durable fiber resin, this 51-inch tall fountain features a classic design with a pineapple top and an integrated auto shut-off pump for convenience and safety. This manual provides essential information for the proper setup, operation, and care of your new fountain.

Figure 1: The XBrand 3-Tier Water Fountain in brown, showcasing its design and water flow.

2. Alaye Aabo

Please read and understand all safety instructions before installing and operating your fountain. Failure to follow these instructions may result in electric shock, injury, or property damage.

• Aabo Itanna: Ensure the fountain is connected to a properly grounded outlet. Do not modify the plug or use an adapter. Keep the electrical cord and connections dry. Disconnect power before performing any maintenance or cleaning.
• Aabo omi: Use clean, fresh water. Do not allow children or pets to play with or drink from the fountain.
• Ibi: Place the fountain on a stable, level surface to prevent tipping and ensure proper water flow. Avoid placing it near electrical outlets or other sensitive equipment where splashing could cause damage.
• Mimu: The fountain is made of fiber resin. Handle with care during assembly and relocation to prevent damage.
• Isẹ: Never operate the pump without sufficient water, as this can damage the pump. The auto shut-off feature is a safety measure, but regular water level checks are recommended.

3. Package Awọn akoonu

Carefully unpack all components and inspect them for any damage. If any parts are missing or damaged, please contact XBrand customer support.

• Fountain Body (Base, Middle Tier, Top Tier with Pineapple Finial)
• Water Pump with Auto Shut-Off Sensor
• Hose
• Electrical Cord with Adapter

olusin 2: exploded view diagram showing the fountain's main components: hose, auto-shut-off pump, water tank, and electrical cord with adapter.

4. Apejọ ati Oṣo

Follow these steps to assemble and set up your XBrand 3-Tier Water Fountain:

1. Yan Ibi: Select a level, stable outdoor location for your fountain, ensuring it is within reach of a grounded electrical outlet.
2. Assemble Tiers: Carefully stack the fountain tiers, starting with the largest base, then the middle tier, and finally the top tier with the pineapple finial. Ensure they are securely seated.
3. Sopọ Pump: Attach the provided hose to the outlet of the water pump.
4. Fifa ipo: Place the pump inside the water tank located in the lowest basin of the fountain. Route the electrical cord out of the fountain through the designated opening, ensuring it does not interfere with water flow or stability.
5. Fi omi kun: Fill the lowest basin of the fountain with clean, distilled water until the pump is fully submerged. Do not overfill.
6. So agbara: Plug the electrical cord into a grounded outdoor outlet. The pump will begin circulating water, and the fountain will start flowing.

Figure 3: The auto shut-off pump and easy-to-connect electrical plug for simple setup.

5. Awọn ilana Iṣiṣẹ

Once assembled and filled with water, operating your fountain is straightforward:

• Starting the Fountain: Plug the electrical cord into a grounded outlet. The pump will activate, and water will begin to flow through the tiers.
• Ipele Omi: Regularly check the water level in the lowest basin. Due to evaporation and splashing, water levels will decrease over time. Refill as needed to ensure the pump remains fully submerged.
• Ẹya Tiipa Aifọwọyi: The integrated pump includes an auto shut-off sensor. If the water level drops too low, the pump will automatically turn off to prevent damage. If this occurs, unplug the fountain, refill with water, and then plug it back in to resume operation.
• Ṣiṣatunṣe Sisan: Some pumps may have an adjustable flow rate switch. If present, adjust to your desired water flow.

olusin 4: Isunmọ view of the pineapple top tier of the XBrand water fountain, with water gently cascading.

6. Itọju

Regular maintenance will ensure the longevity and optimal performance of your fountain.

• Ojoojúmọ́/Ọ̀sọ̀ọ̀sẹ̀: Ṣayẹwo ipele omi ati ṣatunkun bi o ṣe pataki.
• Oṣooṣu: Disconnect power. Drain old water and clean the fountain basins with warm water and a soft cloth to remove any algae, dirt, or mineral deposits. Avoid harsh chemicals. Refill with clean water.
• Fifọ fifa: Periodically clean the pump impeller and intake screen to prevent blockages and maintain efficient water flow. Refer to the pump's specific instructions for detailed cleaning.
• Igba otutu: In areas with freezing temperatures, drain all water from the fountain and pump. Clean the fountain thoroughly and store it indoors in a dry, protected area to prevent damage from ice expansion.

Nọmba 5: Alaye view of water flowing into one of the basins of the XBrand 3-Tier Water Fountain.

7. Laasigbotitusita

If you encounter issues with your fountain, refer to the following common problems and solutions:

8. Awọn pato

• Awoṣe: HD400
• Brand: XBrand
• Ohun elo: Fiber Resin
• Àwọ̀: Brown
• Awọn iwọn ọja: 22.8"L x 22.8"W x 51"H
• Ìwọ̀n Nkan: 32 iwon
• Orisun Agbara: Itanna (Okun)
• Oṣuwọn Sisan fifa: 450 L/h (99 GPH)
• Ẹya Pataki: Pump Tiipa Aifọwọyi
• UPC: 728990744574

Figure 6: Diagram illustrating the dimensions of the 51-inch tall XBrand 3-Tier Water Fountain.

9. Atilẹyin ọja ati Support

XBrand products are manufactured with quality and durability in mind. For specific warranty information or technical support, please refer to the warranty card included with your purchase or visit the official XBrand webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.

For further assistance, please contact XBrand customer service.