Ọrọ Iṣaaju
The EARMOR M20T Electronic Shooting Ear Protection provides advanced hearing safety and communication capabilities for various noisy environments. Featuring a Noise Reduction Rating (NRR) of 26dB and Bluetooth 5.3 connectivity, these earbuds are designed to protect your hearing while allowing ambient sound amplification and seamless communication.
Package Awọn akoonu
Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- Ngba agbara Case
- Àwọn Agbọ́tí Aláìlókùn (Òsì àti Ọ̀tún)
- 3-Size Ear Covers
- 3-Size Cylindrical Foam Eartips
- Universal Conical Tip
- Afẹfẹ Muff
- Retention Cord (Anti-Loss Lanyard)
- USB-C Ngba agbara Cable
- Itọsọna olumulo
Image: EARMOR M20T package contents.
Awọn ilana iṣeto ati wiwọ
1. Yiyan awọn ọtun eartips
The EARMOR M20T comes with various sizes of foam eartips and ear covers to ensure a secure and comfortable fit. A proper fit is crucial for optimal noise reduction and sound quality. Experiment with different sizes to find the best seal for your ears.
2. Wọ awọn Earbuds
- Gently squeeze the foam eartip to compress it. Ensure the foam tip is dry and bouncy before insertion.
- Pull your ear upward with one hand to straighten the ear canal.
- Fi earplug fisinuirindigbindigbin sinu odo eti rẹ.
- Hold the earplug in place for a few seconds until the foam fully expands and creates a tight seal.
- Gently pull on the earbud to check if it fits tightly and securely.
Image: Proper wearing of EARMOR M20T earbuds.
3. Installing the Anti-Loss Rope
To prevent accidental loss of your earbuds, you can attach the included anti-loss rope:
- Remove the foam eartips from the earbuds.
- Thread one end of the anti-loss rope through the designated loop on the earbud.
- Securely fix the rope to the earbud.
- Reinstall the foam eartips back onto the earbuds.
Video: Demonstration of EARMOR M20T anti-loss rope installation and general use.
Gbigba agbara
The EARMOR M20T earbuds are charged using the provided charging case. The case itself is rechargeable via a USB-C cable.
- Ngba agbara si Earbuds: Place the earbuds into their respective slots in the charging case. Ensure the contact points align. The indicator lights on the earbuds will illuminate to show they are charging.
- Gbigba agbara si ọran naa: Connect the USB-C charging cable to the charging port on the case and plug the other end into a compatible USB power source. The indicator lights on the case will show the charging status.
- A full charge for the earbuds typically provides 4-5 hours of use. The charging case can provide up to 3 full charges for the earbuds.
Àwòrán: Àwọn etí inú àpótí ìgbara.
Video: Demonstration of EARMOR M20T charging and mode switching.
Awọn ilana Iṣiṣẹ
1. Agbara Tan / Paa
- Agbara Tan: Press and hold the button on each earbud for approximately 2 seconds until you hear a power-on prompt.
- Agbara Pa: Press and hold the button on each earbud for approximately 2 seconds until you hear a power-off prompt.
2. Ipo Yipada
The M20T features three operational modes: Silent, Indoor, and Outdoor. To switch between modes, briefly press the button on either earbud (approximately 1 second).
- Ipo ipalọlọ: Provides maximum noise reduction, ideal for environments requiring complete focus or extreme quiet.
- Ipo inu ile: Balances noise reduction with ambient sound amplification, suitable for indoor shooting ranges or workshops.
- Ipo ita: Offers enhanced ambient sound amplification for situational awareness while still protecting against harmful impulse noises, perfect for outdoor hunting or construction sites.
Image: One-Button Magic controls.
3. Sisopọ Bluetooth
- When the earbuds are powered on, they will automatically enter pairing mode (indicated by flashing blue and red lights).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "M20T" in the list of available devices.
- Select "M20T" to connect. Once paired, the earbuds will automatically reconnect to your device when powered on and within range.
Image: Seamless Bluetooth Sync.
4. Iṣakoso ipe
- Idahun/Ipe Ipari: Briefly press the button on either earbud once.
- Kọ Ipe: Press and hold the button on either earbud for approximately 2 seconds.
Key Awọn ẹya ara ẹrọ
- NRR 26dB Hearing Protection: The M20T effectively muffles hazardous noises above 82dB, providing crucial hearing protection during high-decibel activities such as shooting, hunting, and operating loud machinery.
- Ohun ibaramu Ampimuduro: Advanced sound technology allows for clear amplification of important ambient sounds, enabling communication and situational awareness without removing the ear protection.
- Directional Clarity: Experience precise stereo surround sound for clear directional awareness, which is vital in tactical situations or hunting.
- Bluetooth 5.3 Asopọmọra: Enjoy stable and seamless wireless connection for audio streaming and calls.
Image: Shockwave 26dB Defense.
Image: Advanced Ambient Awareness.
Image: Directional Clarity.
Itoju
- Ninu: Máa fi aṣọ gbígbẹ tó rọ, tó sì le koko fọ àwọn ètí àti àpótí ìgbafẹ́ déédéé. Má ṣe lo àwọn kẹ́míkà líle tàbí àwọn ohun èlò ìpalára.
- Rirọpo Earp: Replace eartips periodically or if they show signs of wear to maintain optimal hygiene and noise reduction performance.
- Ibi ipamọ: Tọju awọn agbekọri naa sinu apoti gbigba agbara wọn nigbati ko si ni lilo lati daabobo wọn ati jẹ ki wọn gba agbara.
Laasigbotitusita
- Ko si Ohun/Didara Ohun Ko dara:
- Ensure earbuds are properly seated in the ear canal for a tight seal.
- Check the selected mode (Silent, Indoor, Outdoor) is appropriate for your environment.
- Verify Bluetooth connection is stable and volume is adjusted on both the earbuds and your connected device.
- Ekọti Ko Ngba agbara:
- Ensure earbuds are correctly placed in the charging case and contact points are clean.
- Check if the charging case itself has sufficient charge.
- Rii daju pe okun USB-C ati orisun agbara n ṣiṣẹ ni deede.
- Ge asopọ Bluetooth:
- Ensure earbuds are within the effective range of your Bluetooth device.
- Gbiyanju aiṣiṣẹpọ ati tun-pipọ awọn agbekọri pẹlu ẹrọ rẹ.
Awọn pato
| Nọmba awoṣe | M20T SHOCKWAVE |
| Iwọn Idinku Ariwo (NRR) | 26dB |
| Ẹya Bluetooth | 5.3 |
| Aago lenu | 0.5ms (for noise suppression) |
| Igbesi aye batiri (Earbuds) | Approx. 4-5 hours per charge |
| Gbigba agbara Case | Provides up to 3 full charges for earbuds |
| Gbigba agbara Port | USB-C |
| Package Mefa | 5 x 4.72 x 2.32 inches |
| Iwọn Nkan | 8.78 iwon |
Atilẹyin ọja ati Support
EARMOR provides a 1-Year Money Back Guarantee ati a Atilẹyin ọja to lopin for the M20T Electronic Shooting Ear Protection. For detailed warranty terms, technical support, or service inquiries, please refer to the contact information provided in your product packaging or visit the official EARMOR webojula.
