Hinkley Facet 46991BX Medium Convertible Ceiling Light Instruction Manual

1. Alaye Aabo pataki

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries. Keep these instructions for future reference.

• Aabo Itanna: Always disconnect power at the main circuit breaker or fuse box before installation, servicing, or changing bulbs. Ensure all electrical connections comply with local codes and ordinances, as well as the National Electrical Code (NEC) and Canadian Electrical Code (CEC).
• Onise itanna to peye: If you are unsure about wiring or installation, consult a qualified licensed electrician.
• Ilẹ: Ohun mimu yii gbọdọ wa ni ilẹ daradara.
• Awọn ibeere boolubu: Lo iru boolubu ti a ti sọ ati wat nikantage. Maṣe kọja wat ti o pọjutage indicated on the fixture. This fixture requires (5) 12W Medium LED Bulbs (not included).
• Ibi: Ohun èlò yìí yẹ fún àwọn ibi gbígbẹ (nínú ilé) nìkan. Má ṣe fi sínú damp tabi awọn agbegbe tutu.
• Mimu: Handle glass components with care. Wear gloves during installation to prevent fingerprints and cuts.

2. Package Awọn akoonu

Daju pe gbogbo awọn paati ti a ṣe akojọ si isalẹ wa ati ti ko bajẹ ṣaaju tẹsiwaju pẹlu fifi sori ẹrọ.

• Fixture Assembly (Hexagonal body with etched glass)
• Iṣagbesori Ibori
• (1) Ọpá ìsàlẹ̀ 6-inch
• (2) Àwọn ọ̀pá ìsàlẹ̀ 12-inch
• Ohun elo Ohun elo Iṣagbesori (awọn skru, eso waya, ati bẹbẹ lọ)
• Ilana itọnisọna

This image displays the Hinkley Facet Medium Convertible Ceiling Light in its Black Oxide finish, showcasing its hexagonal design and etched glass.

3. Awọn ilana fifi sori ẹrọ

3.1 Ṣaaju ki o to bẹrẹ

1. Pa a agbara ni Circuit fifọ.
2. Carefully unpack the fixture and components. Retain all packaging until installation is complete.
3. Review the diagrams and ensure you have all necessary tools (e.g., screwdriver, wire strippers, ladder).

3.2 Mounting Options (Pendant or Flush Mount)

This fixture is convertible and can be installed as either a pendant or a flush mount. The included down rods allow for adjustable height in pendant configuration, suitable for even or sloped ceilings.

This diagram illustrates the dimensions of the light fixture when installed as a pendant, including its maximum height of 43.5 inches and diameter of 16.5 inches.

This diagram shows the dimensions of the light fixture when installed as a flush mount, indicating a height of 16 inches and a diameter of 16.5 inches.

3.3 Onirin

1. So awọn iṣagbesori akọmọ si awọn ipade apoti lilo awọn skru pese.
2. Connect the fixture's ground wire (usually bare copper or green) to the house ground wire using a wire nut.
3. Connect the fixture's neutral wire (usually white) to the house neutral wire (white) using a wire nut.
4. Connect the fixture's hot wire (usually black) to the house hot wire (black) using a wire nut.
5. Fara fi gbogbo awọn onirin sinu apoti ipade.

3.4 ik Apejọ

1. Secure the canopy to the mounting bracket with the decorative nuts or screws.
2. Install the appropriate number of down rods for your desired pendant height, or directly attach the fixture for flush mount.
3. Install five (5) 12W Medium LED Bulbs (not included) into the sockets. Do not overtighten.
4. Mu agbara pada si ẹrọ fifọ Circuit ki o ṣe idanwo imuduro.

A alaye view of the Hinkley Facet light fixture in Black Oxide, configured as a pendant, highlighting its layered hexagonal structure.

4. Isẹ

Once installed and powered, the Hinkley Facet Ceiling Light operates like any standard hardwired light fixture. It is designed to be dimmable, allowing you to adjust the light output with a compatible dimmer switch (sold separately).

• Irú boolubu: Uses (5) 12W Medium LED Bulbs. Ensure bulbs are fully seated in their sockets.
• Iṣẹ ṣiṣe Dimmable: For dimming capabilities, connect the fixture to a compatible LED dimmer switch. Follow the dimmer switch manufacturer's instructions for installation and operation.

5. Itọju

Regular maintenance will help preserve the appearance and functionality of your Hinkley Facet Ceiling Light.

• Ninu: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Rirọpo Boolubu: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with the same type and wattage of bulb to maintain optimal performance and safety.
• Ayewo: Periodically check for loose connections or damaged wiring. If any issues are found, disconnect power and consult a qualified electrician.

6. Laasigbotitusita

If your fixture is not operating correctly, refer to the following common issues and solutions:

• Imọlẹ ko tan:
  • Ṣayẹwo ti o ba jẹ pe fifọ Circuit ti kọlu.
  • Ensure bulbs are correctly installed and not burnt out.
  • Daju pe gbogbo awọn asopọ waya wa ni aabo.
• Flickering or dimming issues:
  • Ensure bulbs are compatible with the dimmer switch (if installed).
  • Check for loose bulb connections.
  • Verify proper wiring to the dimmer switch.
• Humming noise:
  • Some LED bulbs or dimmer switches may produce a slight hum. If excessive, try different compatible bulbs or a different dimmer.

Tí àwọn ìgbésẹ̀ láti yanjú ìṣòro náà kò bá yanjú ìṣòro náà, kan sí ìrànlọ́wọ́ àwọn oníbàárà Hinkley tàbí onímọ̀ ẹ̀rọ iná mànàmáná tó mọ̀ nípa rẹ̀.

7. Awọn pato

8. Atilẹyin ọja ati Support

This Hinkley lighting fixture comes with a limited warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.

• Iru atilẹyin ọja: Lopin
• Atilẹyin Onibara: For technical assistance, replacement parts, or warranty claims, please contact Hinkley customer service. Contact information can typically be found on the Hinkley webojula tabi lori apoti.