VacLife Cordless Tire Inflator Portable Air Compressor User Manual

1. Ifihan

The VacLife Cordless Tire Inflator (Model ATJ-6988) is a portable and versatile air compressor designed for inflating tires on cars, bikes, and other inflatables. Its compact, cordless design makes it convenient for on-the-go use, providing up to 150 PSI pressure. Equipped with a powerful motor, it offers quick and efficient inflation, along with an LED digital display for real-time pressure monitoring and an auto-shutoff feature for safe operation. The integrated LED light enhances usability in low-light conditions.

2. Awọn ilana aabo

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Jeki ẹrọ naa kuro lọdọ awọn ọmọde ati awọn ohun ọsin.
• Do not operate the inflator in wet conditions or expose it to rain.
• Ensure the correct pressure setting for the item being inflated to prevent over-inflation and potential bursting.
• Allow the device to rest for at least 10 minutes after every 10 minutes of continuous use to prevent overheating.
• Do not disassemble or modify the device. Refer all servicing to qualified personnel.
• Use only the provided charging cable and compatible power sources.
• The device operates at a noise level of approximately 80 dB. Use hearing protection if sensitive to noise or in prolonged use.
• Sọ awọn batiri sọnu ni ifojusọna ni ibamu si awọn ilana agbegbe.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• VacLife Cordless Tire Inflator Unit
• Air Hose with Schrader Valve Connector
• Adapter Valve Adaṣe
• Ball Needle Nozzle
• Inflatable Toy Nozzle
• Okun gbigba agbara USB (USB-A si USB-C)
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Ọja Ipariview

Figure 4.1: VacLife Cordless Tire Inflator and Included Accessories. The image displays the main inflator unit on the right, featuring a digital display and control buttons. To the left, an air hose, two different cone-shaped nozzles, a ball needle, and a USB charging cable are shown.

4.1 irinše

• Ẹka akọkọ: Houses the motor, battery, display, and controls.
• Ọkọ afẹfẹ: Connects the inflator to the tire valve.
• Nozzles: Various adapters for different inflation needs (e.g., car tires, bike tires, sports balls, inflatable toys).
• Ibudo Gbigba agbara USB: Fun gbigba agbara ti abẹnu batiri.

4.2 Awọn iṣakoso ati Ifihan

• Bọtini Agbara (Aarin): Press and hold to turn on/off. Short press to start/stop inflation.
• Bọtini Ipo (M): Cycles through inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA, KG/CM²).
• Àwọn bọ́tìnì '+' / '-': Ṣe atunṣe iye titẹ ibi-afẹde.
• Light Button (Sun icon): Toggles the LED light modes (Flashlight, Alarm Light, SOS Light).
• LED Digital Ifihan: Shows real-time pressure, preset pressure, selected unit, battery level, and inflation mode icons.

5. Eto

5.1 Ngba agbara si Ẹrọ

1. Connect the provided USB charging cable to the charging port on the inflator.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port.
3. The battery indicator on the LED display will show charging status. A full charge typically takes 3-4 hours.
4. Once fully charged, the device can operate continuously for approximately 20 minutes.

5.2 Attaching the Air Hose and Nozzles

1. Screw the air hose securely into the air outlet port on the top of the inflator.
2. Yan nozzle ti o yẹ fun ohun ti o fẹ lati fi sii.
3. Screw the selected nozzle onto the end of the air hose.

6. Awọn ilana Iṣiṣẹ

6.1 Agbara Tan / Pa

• To turn on: Press and hold the Power button (center button) for 2-3 seconds until the display illuminates.
• To turn off: Press and hold the Power button for 2-3 seconds. The device will also automatically shut off after a period of inactivity.

6.2 Selecting Pressure Unit and Mode

• After powering on, press the Mode button (M) to cycle through the four available pressure units: PSI, BAR, KPA, and KG/CM².
• Continue pressing the Mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Each mode may have a default pressure range.

6.3 Eto Ipa Ipa

• Once the desired unit and mode are selected, use the '+' and '-' buttons to adjust the target pressure value. The preset pressure will flash on the display.
• Refer to your vehicle's or item's recommended pressure (usually found on a sticker inside the car door, owner's manual, or on the item itself).

6.4 Starting Inflation

1. Connect the air hose (with appropriate nozzle) securely to the valve stem of the item to be inflated. The display will show the current pressure.
2. Press the Power button (center button) once to start inflation. The inflator will begin pumping air, and the real-time pressure will be displayed.
3. The inflator will automatically stop once the preset target pressure is reached. This is the auto-shutoff feature.
4. To manually stop inflation at any time, press the Power button again.
5. Disconnect the air hose from the valve stem.

Example: Inflating a 195/55 R15 car tire from 22 PSI to 36 PSI typically takes approximately 3 minutes. For optimal performance and device longevity, allow the inflator to rest for at least 10 minutes after every 10 minutes of continuous operation.

6.5 Lilo awọn LED Light

• Press the Light button (sun icon) to cycle through the LED light modes:
• Tẹ akọkọ: Activates the constant flashlight mode.
• Tẹ keji: Activates the alarm light (slow flashing).
• Tẹ Kẹta: Activates the SOS light (Morse code for SOS).
• Ẹkẹrin Tẹ: Pa ina LED.

7. Itọju

• Ninu: Mu ese ita ti ẹrọ naa pẹlu asọ, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is off and disconnected from power before cleaning.
• Ibi ipamọ: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
• Itọju Batiri: To prolong battery life, fully charge the device before long-term storage and recharge it every 3-6 months if not in use. Avoid completely draining the battery frequently.
• Itọju Nozzle: Keep nozzles clean and free of debris to ensure proper air flow.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official VacLife webojula tabi kan si wọn onibara iṣẹ Eka. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.