Ìwé Ìtọ́sọ́nà Olùlò Miroir Drivevplay m1002-6

Ọrọ Iṣaaju

The Miroir Drivvplay m1002-6 is a portable display designed to bring wireless Apple CarPlay and Android Auto functionality to your vehicle. It features a 5-inch IPS touchscreen, integrated 4K dash cam, and offers various connectivity options including Bluetooth, FM transmitter, and AUX support. This device enhances your driving experience with navigation, hands-free communication, and media playback.

Nọmba 1: Miroir Drivvplay m1002-6 with Apple CarPlay interface.

Ohun ti o wa ninu Apoti

Daju pe gbogbo awọn paati wa ṣaaju ki o to tẹsiwaju pẹlu fifi sori ẹrọ.

• Miroir Drivvplay m1002-6 Unit
• Car Mount (Suction cup or 3M adhesive base)
• Power Cable (Car charger)
• AUX Cable
• Iwe afọwọkọ olumulo (iwe yii)
• SD Card (for Dash Cam, if included)

Ṣeto

1. Iṣagbesori Device

1. Yan Ibi kan: Select a suitable flat surface on your dashboard or windshield that does not obstruct your view tàbí kí ó dí àwọn afẹ́fẹ́ lọ́wọ́.
2. Mọ Ilẹ-ilẹ: Ensure the chosen surface is clean and dry for optimal adhesion.
3. So Oke:
   • Ifaya Cup Oke: Press the suction cup firmly against the surface and engage the locking lever.
   • 3M Adhesive Mount: Peel the protective film from the adhesive base and press firmly onto the surface for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching the device.
4. Attach the Drivvplay Unit: Slide the Miroir Drivvplay unit onto the mount until it clicks securely into place. Adjust the viewing igun bi ti nilo.

2. Asopọ agbara

1. Fi ẹ̀rọ amúlétutù ọkọ̀ náà sínú ibi tí agbára 12V (ìdúró iná sìgá) wà nínú ọkọ̀ rẹ.
2. Connect the other end of the power cable to the designated power input port on the Miroir Drivvplay unit.
3. The device should power on automatically when the vehicle's ignition is turned on.

3. Audio Output Connection (Optional)

To output audio through your car's stereo system, choose one of the following methods:

• Cable AUX: Connect the provided AUX cable from the Miroir Drivvplay's AUX output to your car stereo's AUX input. Select AUX as the input source on your car stereo.
• Atagba FM: On the Miroir Drivvplay, select the FM Transmitter option and choose an unused FM frequency. Tune your car stereo to the same FM frequency.
• Bluetooth: If your car stereo supports Bluetooth audio input, you can pair the Miroir Drivvplay with your car stereo. (Note: This is separate from pairing your phone to the Drivvplay for CarPlay/Android Auto).

Awọn ilana Iṣiṣẹ

1. Agbara akọkọ Lori ati Aṣayan Ede

Upon first power-on, the device may prompt you to select your preferred language. Follow the on-screen instructions.

2. Connecting to Apple CarPlay / Android Auto

1. Rii daju pe Bluetooth ati Wi-Fi ti ṣiṣẹ lori foonuiyara rẹ.
2. On the Miroir Drivvplay, select either the "CarPlay" or "Android Auto" icon.
3. The device will display a Bluetooth name. On your smartphone, go to Bluetooth settings and search for this device name.
4. Pair your smartphone with the Miroir Drivvplay via Bluetooth.
5. Once paired, the device will automatically establish a Wi-Fi connection for CarPlay or Android Auto functionality.
6. Your phone's CarPlay or Android Auto interface will appear on the Drivvplay screen.

Akiyesi: For optimal performance, ensure your smartphone's operating system is up to date.

3. Using the 4K Dash Cam

The Miroir Drivvplay includes an integrated 4K dash cam for recording your drives.

• Kaadi SD: Ensure a compatible SD card (FAT32 format recommended) is inserted into the designated slot for recording.
• Gbigbasilẹ: The dash cam typically begins recording automatically when the device powers on. Check the on-screen indicator for recording status.
• Eto: Access the dash cam settings through the device's main menu to adjust resolution, loop recording, G-sensor sensitivity, and other preferences.
• Viewti Footage: Footage le jẹ viewed directly on the Drivvplay screen or by removing the SD card and inserting it into a computer.

4. Bluetooth Connectivity (for non-CarPlay/Android Auto devices)

You can connect other Bluetooth-enabled devices for audio streaming or hands-free calling.

1. On the Miroir Drivvplay, navigate to the Bluetooth settings.
2. Enable Bluetooth on your device (e.g., another smartphone, tablet).
3. Wa fun available devices on your device and select the Miroir Drivvplay.
4. Jẹrisi asopọpọ lori awọn ẹrọ mejeeji.

5. USB Port Iṣẹ

The USB port can be used for:

• Charging your smartphone or other USB-powered devices.
• Connecting to a USB storage device for media playback (check supported formats in specifications).

6. Siri Voice Control / Google Assistant

When connected via CarPlay or Android Auto, you can activate your smartphone's voice assistant (Siri or Google Assistant) by pressing the voice command button on the Drivvplay (if available) or by using the "Hey Siri" / "Hey Google" command.

Itoju

• Ninu iboju: Lo aṣọ rirọ, tí kò ní àwọ̀ láti nu àtẹ́wọ́gbà náà pẹ̀lú ìrọ̀rùn. Yẹra fún àwọn ohun ìfọmọ́ tàbí àwọn ohun olómi.
• Iwọn otutu: Avoid exposing the device to extreme temperatures (hot or cold) for extended periods, as this can affect performance and lifespan.
• Iṣakoso USB: Ensure all cables are routed safely and do not interfere with driving controls or obstruct vision.
• Awọn imudojuiwọn sọfitiwia: Lorekore ṣayẹwo olupese ká webAaye fun eyikeyi awọn imudojuiwọn famuwia ti o wa lati rii daju pe iṣẹ ṣiṣe to dara julọ ati awọn ẹya tuntun.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Miroir webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Miroir Official Webojula: Ile itaja Miroir lori Amazon (Link provided for general brand store, specific support link may vary)