Ọrọ Iṣaaju
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your CREWORKS 60W Stainless Steel Ultrasonic Cleaning Machine. Please read this manual thoroughly before initial use and retain it for future reference.
Awọn Itọsọna Aabo
To ensure safe operation and prevent damage to the unit or injury, observe the following safety precautions:
- Maṣe ṣajọpọ: Attempting to disassemble the unit may result in electric shock or damage.
- Do not use unattended: Always supervise the cleaner during operation.
- Always use sufficient fluid: Ensure the tank is filled to the appropriate level before operation to prevent damage to the ultrasonic transducers.
- Unplug before filling & draining: Disconnect the power cord from the outlet before adding or removing cleaning solution.
- Pa ẹrọ kuro lati awọn ọmọde ati awọn ohun ọsin.
- Do not immerse the main body of the cleaner in water or other liquids.
- Use only non-flammable cleaning solutions.
- Rí i dájú pé a gbé ẹ̀rọ náà sí orí ilẹ̀ tí ó dúró ṣinṣin, tí ó tẹ́jú, tí ó sì lè kojú ooru.
olusin 1: Iwaju view of the CREWORKS Ultrasonic Cleaner, showing the control panel and a yellow warning label with safety instructions.
Ọja Awọn ẹya ara ẹrọ
- Large Volume: 2L (1/2 gallon) tank capacity, suitable for various items.
- Alagbara Ultrasonic Cleaning: 60W ultrasonic power generates cavitation bubbles for thorough cleaning.
- Ohun èlò ìgbóná tí a ti so pọ̀: 100W heating power with temperature control from 70 to 175°F (20-80°C) to enhance cleaning effectiveness.
- Iṣakoso Rọrun: Two convenient knobs for setting cleaning time (1-30 minutes) and temperature.
- Ikole ti o tọ: Made of stainless steel, with 304 banding for the tank and basket, and 201 banding for the exterior, ensuring longevity.
- Ohun elo to pọ: Effectively cleans jewelry, glasses, lab tools, auto parts, and other intricate items without harsh chemicals.
- Awọn ẹya Aabo: Non-skid rubber feet for stability and multiple dissipation holes for reliable performance.
Figure 2: The CREWORKS Ultrasonic Cleaning Machine shown with examples of items it can clean, such as small crevices, worn lenses, and delicate objects.
Figure 3: A diagram explaining the powerful ultrasonic cavitation process, showing how bubbles form, expand, and burst to clean surfaces.
Figure 4: Visual demonstration of the cleaning effect, displaying before and after images of eyeglasses, a razor blade, and a circuit board.
Ṣeto
- Yọọ kuro: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Inspect for any shipping damage.
- Ibi: Place the unit on a firm, level, and dry surface, ensuring adequate ventilation around the machine. Avoid placing it near heat sources or in direct sunlight.
- Kun Ojò: Ensure the unit is unplugged. Fill the stainless steel tank with the appropriate cleaning solution. Do not exceed the "MAX" fill line. Ensure the items to be cleaned are fully submerged.
- Fi Agbọn sii: Place the stainless steel cleaning basket into the tank. This basket helps protect items and the tank from direct contact.
- So agbara: Pulọọgi okun agbara sinu iṣan itanna ti ilẹ.
Awọn ilana Iṣiṣẹ
The CREWORKS Ultrasonic Cleaner features intuitive knob controls for easy operation.
- Kojọpọ Awọn nkan: Place the items to be cleaned into the cleaning basket. Ensure items are not overcrowded and have space for the solution to circulate.
- Ṣeto iwọn otutu: Yipada awọn IGÚN knob to select the desired heating temperature (70-175°F / 20-80°C). The "HEATING" indicator light will illuminate when heating is active. For optimal cleaning, pre-heating the solution is often recommended.
- Ṣeto Akoko: Yipada awọn AKOKO knob to select the desired cleaning duration (1-30 minutes). The "CLEANING" indicator light will illuminate when the ultrasonic function is active.
- Bẹrẹ Isọmọ: The unit will begin heating and/or cleaning according to your settings. The ultrasonic process will generate a slight humming sound.
- Bojuto Ilọsiwaju: Allow the cleaning cycle to complete. The unit will automatically stop the ultrasonic function when the timer reaches zero. The heating function will continue until manually turned off or the set temperature is reached.
- Yọ Awọn nkan kuro: Once the cycle is complete, unplug the unit. Carefully lift the basket out of the tank and rinse the cleaned items under clean water.
- Agbara Pa: Turn both the TEMPERATURE and TIME knobs to the "OFF" position.
Figure 5: The control panel of the ultrasonic cleaner, highlighting the temperature and time adjustment knobs for convenient and efficient operation.
Itoju
Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti olutọpa ultrasonic rẹ.
- Sisọ tanki naa: After each use, especially if the solution is dirty, unplug the unit and carefully pour out the used cleaning solution. Avoid spilling liquid on the control panel or exterior.
- Ninu ojò naa: Wipe the inside of the stainless steel tank with a soft cloth to remove any residue. For stubborn deposits, use a mild, non-abrasive cleaner. Rinse thoroughly.
- Ode Ninu: Mu ese ita kuro pẹlu ipolowoamp asọ. Ma ṣe lo awọn olutọpa abrasive tabi fi omi mọlẹ kuro ninu omi.
- Ibi ipamọ: Store the cleaner in a cool, dry place when not in use. Ensure the tank is completely dry before storage.
- Rirọpo Fuse: The unit is equipped with protective fuses. If the unit fails to power on, check and replace the fuses located near the power inlet if necessary. Always use fuses of the correct rating.
olusin 6: A sunmọ-soke view of the food-grade 304 stainless steel tank, emphasizing its durable and easy-to-clean surface.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ko ni agbara lori. | No power supply; Blown fuse; Power switch off. | Check power cord connection and wall outlet; Replace fuse (refer to Maintenance section); Ensure power switch is in the ON position. |
| Ultrasonic function not working (no humming sound). | Insufficient water level; Timer not set; Unit malfunction. | Ensure water level is above MIN line; Set the TIME knob; Contact customer support if problem persists. |
| Alapapo iṣẹ ko ṣiṣẹ. | Temperature knob not set; Heating element malfunction. | Set the TEMPERATURE knob; Allow sufficient time for heating; Contact customer support if problem persists. |
| Àwọn àbájáde ìwẹ̀nùmọ́ tí kò dára. | Incorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tank; Items not fully submerged. | Use appropriate ultrasonic cleaning solution; Increase cleaning time or temperature; Reduce number of items; Ensure items are fully submerged. |
Awọn pato
- Awoṣe: 2L Knob Style
- Iwọn ojò: 2 L (1/2 gal.)
- Agbara Ultrasonic: 60W
- Agbara alapapo: 100W
- Igbohunsafẹfẹ Ultrasonic: 40kHz
- Ibiti Aago: 1-30 iṣẹju
- Iwọn otutu: 70-175°F (20-80°C)
- Ohun elo: 304 Stainless Steel (Tank & Basket), 201 Stainless Steel (Exterior)
- Lapapọ Awọn iwọn: 6.9 x 6.7 x 8.3 inches
- Iwọn Ọja: 5.51 iwon
- Olupese: Awọn iṣẹ ṣiṣe
Figure 7: Detailed specifications and dimensions of the CREWORKS Ultrasonic Cleaner and its included basket.
Atilẹyin ọja ati Support
For warranty information, technical support, or any questions regarding your CREWORKS Ultrasonic Cleaning Machine, please contact CREWORKS customer service. Refer to the product packaging or the official CREWORKS webaaye fun awọn alaye olubasọrọ.
Webojula: CREWORKS Official Store
