Ìwé Ìtọ́sọ́nà Olùlò Ẹ̀rọ Ìmọ́tótó Ultrasonic Oní-nọ́ńbà CREWORKS 2L

1. Ifihan

Thank you for choosing the CREWORKS 2L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

2. Awọn ilana aabo

Nigbagbogbo ṣe akiyesi awọn iṣọra ailewu atẹle lati yago fun ipalara tabi ibajẹ si ẹyọkan:

• Maṣe ṣajọpọ ẹyọ naa.
• Maṣe lo lairi.
• Always use sufficient fluid in the tank.
• Unplug before filling or draining.
• Do not operate the unit without liquid in the tank.
• Jeki kuro ni arọwọto awọn ọmọde.
• Ma ṣe rì ẹyọ akọkọ sinu omi tabi awọn olomi miiran.
• Use only appropriate cleaning solutions. Avoid flammable or corrosive liquids.
• Ensure the power cord is not damaged and is properly connected to a grounded outlet.

Figure 2.1: The CREWORKS 2L Digital Ultrasonic Cleaner with its warning label, emphasizing safety precautions.

3. Ọja Ipariview ati Awọn ẹya ara ẹrọ

The CREWORKS 2L Digital Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using ultrasonic technology. It features a durable stainless steel tank, digital controls, and multiple cleaning modes.

3.1 Key Awọn ẹya ara ẹrọ

• Agbara 2L: Suitable for a wide range of items.
• 60W Ultrasonic Power: Provides effective cavitation for deep cleaning.
• 100W Heating Function: Allows for temperature adjustment (20-80℃) to enhance cleaning.
• Awọn iṣakoso oni-nọmba: Intuitive panel for setting time (0-99 min) and temperature.
• Degassing Mode: Eliminates gas bubbles for improved cavitation efficiency.
• 7 Levels of Oscillation: Adjustable intensity for delicate to robust cleaning.
• Isẹ idakẹjẹ: Thick tank design reduces noise to below 60 dB.
• 3 Awọn ọna mimọ: Quick, Standard, and Deep for varied cleaning needs.
• 304 Stainless Steel Tank: Ensures durability and food-grade safety.
• Transparent Acrylic Lid: Allows real-time observation of the cleaning process.

Figure 3.1: Close-up of the digital control panel, highlighting the time and temperature displays, and control buttons.

Figure 3.2: Illustration of the ultrasonic cleaning principle, showing the formation, expansion, and bursting of microscopic bubbles for effective cleaning.

4. Eto

Follow these steps to set up your ultrasonic cleaner:

1. Ṣii silẹ: Fi ìṣọ́ra yọ ẹ̀rọ náà kúrò nínú àpò rẹ̀. Ṣàyẹ̀wò bóyá ó ti bàjẹ́.
2. Ibi: Place the cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
3. Asopọ agbara: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
4. Kun ojò: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
5. Fi Agbọn sii: If using, place the cleaning basket into the tank.

Figure 4.1: The ultrasonic cleaner with its lid open, showing the stainless steel tank and the included cleaning basket.

5. Awọn ilana Iṣiṣẹ

Operating your CREWORKS ultrasonic cleaner is straightforward:

5.1 Ipilẹ isẹ

1. Agbara Tan: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
2. Place Items: Carefully place the items to be cleaned into the cleaning basket, ensuring they are fully submerged in the solution but not touching each other or the tank bottom directly.
3. Ṣeto Iwọn otutu (Aṣayan): Press the "T/°C" button to adjust the desired cleaning temperature (20-80℃) using the up/down arrows. Heating will begin automatically.
4. Ṣeto Akoko: Use the "TIME" up/down arrows to set the cleaning duration (0-99 minutes).
5. Select Mode (Optional): Choose from "QUICK" (5 min), "STD" (15 min), or "EXT" (30 min) preset modes if desired.
6. Bẹrẹ Isọmọ: Press the "START" button to begin the ultrasonic cleaning cycle. The display will show the remaining time.
7. Ipari Yiyi: The unit will automatically stop when the timer reaches zero.
8. Yọ Awọn nkan kuro: Carefully remove the cleaning basket and rinse the cleaned items under clean water.
9. Agbara Pa: Turn off the main power switch and unplug the unit when not in use.

5.2 Degassing Mode

The Degassing mode removes air bubbles from the cleaning solution, which can interfere with ultrasonic cavitation, making the cleaning process more efficient, especially with new solutions. Press the "DEGAS" button to activate this mode. It is recommended to run degassing for a few minutes before starting a cleaning cycle with fresh solution.

Figure 5.1: Visual representation of the degassing process, where air bubbles are removed from the cleaning solution to optimize ultrasonic performance.

5.3 Adjustable Oscillation

The unit offers 7 levels of oscillation intensity. This allows you to select a gentler cleaning for delicate items or a more powerful one for heavily soiled objects. Adjust the oscillation intensity using the dedicated knob or buttons on the control panel, if available, or by selecting the appropriate cleaning mode.

Figure 5.2: Illustration demonstrating the 7-level oscillation adjustment, allowing users to customize cleaning intensity for various items, from delicate jewelry to robust tools.

6. Itọju ati Itọju

Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner.

• Sisọ tanki naa: After each use, especially if the solution is dirty, unplug the unit and carefully drain the liquid from the tank.
• Ninu ojò naa: Wipe the inside of the tank with a soft cloth. For stubborn residues, use a mild detergent and rinse thoroughly. Do not use abrasive cleaners.
• Ode Ninu: Mu ese ita kuro pẹlu ipolowoamp asọ. Maṣe lo awọn kemikali lile.
• Ibi ipamọ: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Ayẹwo igbagbogbo: Lokọọkan ṣayẹwo okun agbara ati pulọọgi fun eyikeyi awọn ami ti ibajẹ.

Figure 6.1: Demonstrates the visible cleaning effect of the ultrasonic cleaner on items like glasses, razor blades, and circuit boards, showing their improved cleanliness after use.

7. Laasigbotitusita

If you encounter issues with your ultrasonic cleaner, refer to the following table:

8. Awọn pato

Detailed technical specifications for the CREWORKS 2L Digital Ultrasonic Cleaner:

Figure 8.1: Dimensional diagram of the ultrasonic cleaner and its cleaning basket, providing precise measurements for planning and usage.

9. atilẹyin ọja Information

This product comes with a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact CREWORKS customer support directly. Keep your proof of purchase for warranty validation.

10. Onibara Support

For any questions, technical assistance, or service requests, please contact CREWORKS customer support. Contact information can typically be found on the product packaging, the official CREWORKS webojula, tabi nipasẹ rẹ ojuami ti o ra.

Olupese: Awọn iṣẹ ṣiṣe

ASIN: B0CTSVGC2Z