1. Ọja Ipariview
The ANENG GN602 is a portable, pen-type digital moisture meter designed for quick and accurate measurement of moisture content in various materials, including wood, lumber, concrete, bricks, and other building materials. Its compact design makes it suitable for woodworking, water damage restoration, construction, and home improvement projects.
Awọn ẹya pataki:
- Pen-Type Design: Convenient pocket-sized form factor for portability.
- High-Precision Pins: Equipped with two sensitive pins for swift and accurate readings.
- Dual Modes & 7 Calibration Scales: Offers two measurement modes and seven material calibration scales for diverse wood types and construction materials, covering a moisture range from 0.0% to 58%.
- Iṣẹ idaduro data: Allows retention of current readings for stable and precise recording.
- Iboju LCD Afẹyinti: Ó ń rí i dájú pé àwọn ìwé kíkà hàn kedere ní onírúurú ipò ìmọ́lẹ̀.
- Lilo-agbara: Features automatic shutdown after 10 minutes of inactivity to conserve battery life.
- Atọka Batiri Kekere: Displays an icon to remind users of timely battery replacement.
Figure 1: ANENG GN602 Pen-Type Moisture Meter with its protective cap removed, showing the measurement pins and the digital display. Two AAA batteries are shown alongside the device.
2. Eto ati Batiri sori
Before using the ANENG GN602 moisture meter, ensure that the batteries are correctly installed.
2.1. Fifi sori batiri
- Wa ideri iyẹwu batiri ni ẹhin ẹrọ naa.
- Open the cover by sliding or gently prying it off.
- Insert two 1.5V AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Rọpo ideri iyẹwu batiri ni aabo.
2.2. Ibẹrẹ Ṣayẹwo
After battery installation, power on the device. The display should illuminate. The meter features a self-check function built into the protective cap. To perform a self-check:
- Ensure the protective cap is placed over the measurement pins.
- Gently push the pins through the designated pin holes on the outer top of the cap.
- The meter should display a reading of approximately 20.5% RH. If this reading is shown, the meter is calibrated correctly and ready for use.
Figure 2: The ANENG GN602 Moisture Meter illustrating its pen-type design and pocket-sized portability, along with a visual representation of its 7 material modes for different types of wood and building materials.
3. Awọn ilana Iṣiṣẹ
3.1. Agbara Tan / Paa
- Tẹ awọn Bọtini agbara lati tan mita naa.
- The meter will automatically shut down after 10 minutes of inactivity to conserve battery life.
3.2. Selecting Material Mode
The meter offers 7 calibration scales (modes) for different materials. To select the appropriate mode:
- Tẹ awọn Bọ́tìnì 'M' to cycle through the available material modes (Mode 1 to Mode 7).
- Refer to the user manual's material chart (not provided in this extract, but typically found in the full manual) to match the mode number with your specific material (e.g., oak, pine, concrete, brick).
Figure 3: The ANENG GN602 Moisture Meter shown in various application scenarios, including wood processing, plank processing, measuring firewood, and detecting moisture on a wall surface.
3.3. Gbigbe Iwọn kan
- Yọ fila aabo kuro lati awọn pinni wiwọn.
- Select the appropriate material mode using the 'M' button.
- Carefully insert the two measurement pins into the material you wish to test. Ensure both pins penetrate the surface adequately for an accurate reading.
- Ogorun akoonu ọrinrintage yoo han loju iboju LCD.
3.4. Iṣẹ́ Ìdádúró Dátà
- Tẹ awọn 'MAX/MIN' button briefly to activate the data hold function. The current reading will be frozen on the display.
- Press the 'MAX/MIN' button again to release the hold and resume live measurements.
- Holding the 'MAX/MIN' button will display the maximum or minimum recorded values.
3.5. Iṣakoso Backlight
- Tẹ awọn bọtini ina (often integrated with the power button or a separate button with a light bulb icon) to turn the LCD backlight on or off. This improves visibility in low-light conditions.
Figure 4: Comparison of the ANENG GN602 Moisture Meter's display with the backlight turned on (left) and off (right), demonstrating improved readability in darker environments.
4. Itọju
- Ninu: Wipe the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Ibi ipamọ: When not in use, always replace the protective cap over the measurement pins to prevent damage and injury. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Rirọpo Batiri: Replace batteries promptly when the low-battery indicator appears on the display to ensure accurate readings and prevent battery leakage.
- Ìtọ́jú Pínì: Ensure the measurement pins are clean and free from debris for optimal contact with the material.
5. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Mita ko ni agbara lori. | Awọn batiri ti o ku tabi ti ko tọ ti fi sori ẹrọ. | Check battery polarity; replace with new 1.5V AAA batteries. |
| Awọn kika aipe tabi aisedede. | Incorrect material mode selected; pins not fully inserted; dirty pins; material too dry/wet for range. | Ensure correct mode is selected; fully insert pins; clean pins; verify material is within the meter's measurement range (0.0% to 58%). |
| Ifihan ti wa ni baibai tabi flicker. | Batiri kekere. | Rọpo awọn batiri. |
| Imọlẹ afẹyinti ko ṣiṣẹ. | Backlight function off; low battery. | Press the light button to activate; replace batteries. |
6. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | GN602 |
| Iwọn Iwọn | 0.0% ~ 58.0% |
| Material Modes | 7 Calibration Scales |
| Ibi ti ina elekitiriki ti nwa | 2 x 1.5V AAA Awọn batiri |
| Tiipa aifọwọyi | Lẹhin iṣẹju 10 ti aiṣiṣẹ |
| Ifihan | Afẹyinti LCD |
| Awọn iwọn | 158.4 x 33 mm (tó tó 6.23 x 1.3 inches) |
| Iwọn | 118 g |
Figure 5: The ANENG GN602 Moisture Meter displayed with its packaging, showing key dimensions and battery type.
7. Atilẹyin ọja ati Support
ANENG provides lifetime service and technical support for the GN602 moisture meter. For any inquiries, troubleshooting assistance, or warranty claims, please contact ANENG customer service through their official channels.
Jọwọ pa ìwé ẹ̀rí ìrajà rẹ mọ́ fún ìdí àtìlẹ́yìn.
