Outsunny 13' x 10' Manual Retractable Awning Instruction Manual

1. Ifihan

Thank you for choosing the Outsunny 13' x 10' Manual Retractable Awning. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your awning. Please read all instructions carefully before use and retain this manual for future reference.

Awọn ẹya pataki:

• Manual Retraction: Easily extend and retract the awning using the included crank handle.
• Igun Atunse: Tilt the awning from 45-85° to optimize shade throughout the day.
• Aṣọ ti o tọ: Constructed from 280gsm polyurethane-coated fabric, offering water resistance, fade resistance, and UV30+ sun protection.
• Férémù tó lágbára: Features a powder-coated steel and aluminum frame designed for stability and weather endurance.
• Iṣagbesori pupọ: Suitable for installation on various surfaces including brick walls, concrete, and above doors or windows.

Image 1.1: The Outsunny 13' x 10' Retractable Awning providing shade over a patio area.

2. Alaye Aabo

Tẹle awọn itọsọna aabo wọnyi lati yago fun ipalara tabi ibajẹ si ọja naa:

• Always exercise caution during large storms. Retract the awning in strong winds, heavy rain, or snow to prevent damage.
• Ensure proper installation on solid, structurally sound surfaces. Consult a professional if unsure about wall suitability.
• Regularly inspect all mounting hardware and connections for tightness and wear.
• Ma ṣe gbe awọn nkan kọkọ si ara igi awning tabi aṣọ.
• Jeki awọn ọmọde ati awọn ohun ọsin kuro ni awin nigba iṣẹ.

3. Eto ati fifi sori

This section outlines the steps for assembling and installing your retractable awning. Two people are recommended for installation.

3.1 Pre-Fifi sọwedowo

• Rii daju pe gbogbo awọn paati wa ni ibamu si atokọ iṣakojọpọ.
• Ensure the installation wall measures at least 8.2-11.5 feet (2.5-3.5m) in height.
• If mounting above a door or window, an additional clearance of 11.75 inches (30cm) is required above the top of the opening.
• The mounting surface must be capable of supporting the awning's weight and operational forces.

Image 3.1: Recommended installation height (8.2-11.5ft) and reserved distance (>11.75") for the awning.

3.2 Mounting the Brackets

1. Mark the desired position for the mounting brackets on your wall. Ensure the brackets are level and spaced correctly to support the awning frame.
2. Lu awaoko ihò fun awọn iṣagbesori skru.
3. Securely fasten the brackets to the wall using the provided hardware.

Image 3.2: Visual guide for installation height and clearance requirements.

3.3 Attaching the Awning

1. Carefully lift the awning assembly and hook it onto the installed brackets.
2. Secure the awning to the brackets using the provided bolts and nuts. Ensure all connections are tight.

Image 3.3: Detail of the solid metal brackets and aluminum arms.

3.4 Fifi sori Video Itọsọna

4. Awọn ilana Iṣiṣẹ

Your Outsunny awning is designed for simple manual operation.

4.1 Extending ati Retracting awning

1. Locate the crank handle.
2. Hook the crank handle into the loop on the side of the awning mechanism.
3. Yi ohun mimu mimu si clockwisipo lati fa awning na.
4. Turn the crank handle counter-clockwise to retract the awning.
5. Extend the awning to your desired length for optimal shade.

Image 4.1: The manual crank handle allows for easy extension and retraction of the awning.

Image 4.2: Manual operation via the hand crank for smooth and quiet extension/retraction.

4.2 Ṣíṣe àtúnṣe igun àṣọ

The awning's tilt can be adjusted to provide optimal shading based on the sun's position.

1. Loosen the adjustment bolts on both sides of the awning arms.
2. Carefully adjust the angle of the awning arms to achieve a tilt between 45-85°.
3. Once the desired angle is set, securely tighten the adjustment bolts on both sides.

Image 4.3: The awning's angle can be adjusted between 45-85 degrees for effective sun protection.

Image 4.4: Adjust the awning's angle to suit varying sun exposure throughout the day.

5. Itọju

Proper maintenance will extend the life and appearance of your Outsunny awning.

5.1 Ìtọ́jú Aṣọ

• Clean the fabric regularly with mild soap and water. Do not use harsh chemicals or abrasive cleaners.
• Rinse thoroughly and allow the fabric to air dry completely before retracting to prevent mildew.
• The 280gsm PU-coated fabric is water-resistant and fade-resistant, but prolonged exposure to extreme weather can affect its lifespan.

Image 5.1: The awning fabric features 280gsm PU coating for durability and protection.

5.2 fireemu Itọju

• Inspect the aluminum and powder-coated steel frame periodically for any signs of rust, damage, or loose connections.
• Mu eyikeyi awọn boluti alaimuṣinṣin tabi awọn skru.
• Nu fireemu pẹlu ipolongoamp asọ ati ìwọnba detergent bi ti nilo.

Image 5.2: Details of the fabric texture, mounting bracket, and crank handle connection point.

6. Laasigbotitusita

Ti o ba pade awọn ọran pẹlu awning rẹ, tọka si awọn imọran laasigbotitusita ti o wọpọ wọnyi:

• Awning ko fa siwaju / fa pada laisiyonu: Check for any obstructions in the arms or fabric path. Ensure the crank mechanism is clean and free of debris.
• Awning sags or appears uneven: Verify that all mounting bolts are securely tightened. Re-check the angle adjustment bolts and ensure they are uniformly tightened on both sides.
• Awning damaged by wind: Always retract the awning during high winds. If damage occurs, inspect the frame and fabric for bends or tears. Damaged components may need replacement.

7. Awọn pato

Image 7.1: Key dimensions of the awning.

8. Atilẹyin ọja ati Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact Outsunny customer service directly. You can typically find contact information on the manufacturer's webojula tabi nipasẹ rẹ alagbata.

Outsunny is a brand of Aosom LLC. For assistance, please visit the Outsunny itaja lori Amazon or the Aosom webojula.