JIARUIXIN JR1956G 12V Control Board Instruction Manual

1. Ifihan

This manual provides instructions for the JIARUIXIN JR1956G 12V Multi-Function Control Board, a replacement part designed for children's electric vehicles. It covers essential information regarding installation, operation, and maintenance to ensure proper function and longevity of the product.

2. Ọja Ipariview

The JR1956G 12V control board integrates various functions for children's ride-on cars, including music playback, storytelling, power display, and speed adjustment. It also features Bluetooth connectivity for external audio sources.

olusin 2.1: Iwaju view of the JR1956G 12V control panel, showing the digital display, various control buttons, and input ports.

The control panel features an intuitive layout with clearly labeled buttons for easy operation by children and adults.

3. fifi sori

This control board is a replacement part. Careful installation is required.

3.1 Pre-Fifi sọwedowo

• Ibamu: Verify that the appearance and connector layout of this replacement board match your original control board. This board is designed for specific children's riding toys.
• Voltage: Ensure your electric vehicle operates on a 12V system. This control board requires a 12V power supply.
• Ipò Batiri: Confirm the vehicle's 12V battery is in good working condition and fully charged.
• Aabo Lakọkọ: Always disconnect the vehicle's main power source (battery) before beginning any installation or wiring work.

3.2 Sísopọ̀ Pátákó náà

The back of the control board features various connectors for speakers, power, motors (forward/reverse), and other accessories. Carefully match these connections to your vehicle's existing wiring harness. Refer to the diagram below for connector identification.

olusin 3.1: Pada view of the JR1956G circuit board, showing connection points for speakers, power input, motor controls (Forward/Reverse), and other auxiliary functions.

Ensure all connections are secure and correctly polarized to prevent damage to the board or vehicle. Incorrect wiring can lead to malfunction or permanent damage.

4. Isẹ

Familiarize yourself with the control panel layout for optimal use.

Figure 4.1: Close-up of the JR1956G control panel, highlighting the 'Horn' button and other operational controls.

4.1 Iṣakoso Panel Awọn iṣẹ

4.2 Bluetooth Asopọ

1. Ensure the control board is powered on.
2. Tẹ awọn MODE button until 'B' or 'Bluetooth' is indicated on the display.
3. On your external audio device (e.g., smartphone), search for available Bluetooth devices.
4. Select the device named 'JR1956G' or similar to pair.
5. Once paired, you can play audio from your device through the vehicle's speakers.

5. Itọju

• Ninu: Keep the control board clean and dry. Use a soft, dry cloth to wipe the surface. Avoid using liquid cleaners or abrasive materials.
• Ibi ipamọ: Store the control board in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Ṣayẹwo Batiri: Regularly inspect the vehicle's 12V battery and its connections to ensure it is functioning correctly and providing stable power.
• Iṣẹ Ọjọgbọn: Do not attempt to open or repair the internal components of the control board unless you are a qualified technician. Unauthorized repairs may void any potential warranty.

6. Laasigbotitusita

If you encounter issues with your JR1956G control board, refer to the following common troubleshooting steps:

• Ẹka Ko Ṣiṣẹ Tan-an:
  • Ensure the vehicle's main power switch is in the 'ON' position.
  • Verify the 12V battery is charged and properly connected to the vehicle's system and the control board.
  • Check all wiring connections to the control board for looseness or damage.
• Functions Not Responding:
  • Confirm the unit is powered on and the display is active.
  • Check for any loose connections to the specific components (e.g., speakers, motors).
  • If issues persist after checking connections and power, a component may be faulty.
• No Audio from USB/Bluetooth:
  • Rii daju pe o tọ MODE (USB or Bluetooth) is selected.
  • For Bluetooth, confirm successful pairing with your device.
  • For USB, ensure the USB drive is properly inserted and contains compatible audio files.
  • Ṣayẹwo awọn asopọ agbọrọsọ.

If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified technician or contact customer support.

7. Alaye Aabo

• Fun lilo ita nikan.
• Pa a mọ kuro ninu ina tabi awọn orisun ooru taara.
• Ṣe idaniloju vol to daratage (12V) is used to prevent damage to the control board or the electric vehicle, and to avoid potential injury.
• Installation and maintenance should be performed by an adult or under strict adult supervision.
• Do not expose the control board to water or other liquids.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information, technical assistance, or customer support, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt or order number readily available for reference.