Ìwé Ìtọ́ni DEERC D20S Drone pẹ̀lú Kámẹ́rà 1080P

1. Ifihan

This manual provides essential information for the safe operation and maintenance of your DEERC D20S Drone. Please read this manual thoroughly before operating the aircraft to ensure proper function and to avoid damage or injury. Keep this manual for future reference.

2. Ọja Ipariview

2.1 Package Awọn akoonu

The DEERC D20S package includes the following components:

• DEERC D20S Drone (with integrated 1080p HD FPV Camera)
• Isakoṣo latọna jijin
• 2 x Litiumu polima Batiri
• Àwọn ohun èlò ìpèsè (ṣeto)
• Okun Ngba agbara USB
• Screwdriver
• Ilana itọnisọna

Image: DEERC D20S Drone, remote control, batteries, propellers, and charging cable.

2.2 Key Awọn ẹya ara ẹrọ

• Kamẹra FPV 1080P HD: Adjustable camera for real-time video transmission.
• Apẹrẹ folda: Iwapọ ati gbigbe fun gbigbe ti o rọrun.
• Mọto ti ko fẹlẹ: Provides powerful and stable flight with improved wind resistance.
• Idaduro Giga: Maintains a stable altitude for easy control.
• Ipo Sisan Opitika: Enhances stability for both indoor and outdoor flight.
• Àwọn ìyípadà 3D: Perform aerial stunts with ease.
• Ipo Aini ori: Simplifies flight orientation, especially for beginners.
• Ìgbéra/Ìbalẹ̀ Kan-Kọ́kọ́rọ́: Simplifies starting and ending flights.
• Iduro Pajawiri: Immediate shutdown for safety.
• 3 Awọn ọna iyara: Adjustable flight speed for different skill levels.
• Iṣakoso afarajuwe: Use hand gestures to take photos or videos.
• Akoko Ofurufu gigun: Two batteries provide up to 30 minutes of flight.

3. Eto

3.1 Batiri sori ati gbigba agbara

Ensure batteries are fully charged before first use. The drone comes with 2 Lithium Polymer batteries.

1. Fi batiri ti o ti gba agbara patapata sinu apo batiri drone naa titi ti yoo fi tẹ sinu ipo rẹ.
2. To charge the battery, connect the USB charging cable to the battery and a suitable USB power source (e.g., computer, USB wall adapter).
3. The charging indicator will show the charging status. Ensure the battery is fully charged before use.

Image: Illustration of drone battery being charged via USB cable. The image highlights low power alarm and overcharge protection features.

3.2 Propeller fifi sori

The drone comes with pre-installed propellers. If replacement is needed, use the provided screwdriver to carefully remove and install new propellers, ensuring correct orientation (A/B labels).

3.3 Eto Iṣakoso latọna jijin

Insert 3 AAA batteries (not included) into the remote control. Extend the phone holder to mount your smartphone for FPV viewìṣàkóso àti ìṣàkóṣo ohun èlò.

Image: A person holding the remote control with a smartphone mounted, showing the FPV view.

3.4 App Asopọ

Download the DEERC FPV app from your smartphone's app store. Connect your smartphone to the drone's Wi-Fi network (usually named "DEERC-D20S-XXXX"). Once connected, open the app to view the live camera feed and access additional flight controls.

4. Awọn ilana Iṣiṣẹ

4.1 Pre-Flight Akojọ ayẹwo

• Rii daju pe drone ati awọn batiri isakoṣo latọna jijin ti gba agbara ni kikun.
• Unfold the drone arms completely.
• Gbe drone sori pẹpẹ kan, ipele ipele.
• Connect your smartphone to the drone's Wi-Fi and open the app.

4.2 Ìgbésẹ̀ àti Ìbalẹ̀

1. Agbara Tan: Tẹ bọtini agbara lori drone naa ki o si di mu titi ti awọn ina ifihan yoo fi tan.
2. Pipọpọ: Turn on the remote control. Push both joysticks down and outwards simultaneously to pair the remote with the drone. The drone's lights will stop flashing and become solid when paired.
3. Ilọkuro bọtini kan: Press the One-Key Takeoff button on the remote control (or in the app). The drone will automatically lift off and hover at a stable altitude.
4. Gbigbe afọwọṣe: Alternatively, after pairing, push both joysticks down and inwards to arm the motors. Then, push the left joystick up to manually take off.
5. Ibalẹ bọtini Ọkan: Press the One-Key Landing button on the remote control (or in the app). The drone will automatically descend and land.

Image: A person operating the drone with the remote control, showing the drone hovering after takeoff.

4.3 Ipilẹ ofurufu idari

• Joystick Òsì (Throttle/Yaw):
  • Push up/down: Increase/decrease altitude.
  • Push left/right: Rotate drone left/right (yaw).
• Joystick Ọ̀tún (Pípà/Yípo):
  • Push up/down: Move drone forward/backward (pitch).
  • Push left/right: Move drone left/right (roll).

4.4 To ti ni ilọsiwaju Awọn ẹya ara ẹrọ

• Idaduro Giga: The drone automatically maintains its current altitude, allowing for easier control of direction.
• Ipo Aini ori: Activates a mode where the drone's orientation is relative to the pilot, simplifying control regardless of the drone's actual front direction.
• Àwọn ìyípadà 3D: Press the 3D Flip button on the remote, then push the right joystick in any direction to perform a flip.
• Circle Fly: The drone will fly in a circular path around a central point.
• Iṣakoso afarajuwe: Use specific hand gestures in front of the camera to trigger photo or video recording. Refer to the app for specific gestures.
• Awọn ipo Iyara: Toggle between 3 speed settings (low, medium, high) to adjust the drone's responsiveness and speed.

Image: Visual representation of the drone performing 3D flips, high speed rotation, and circle fly functions.

Image: Drone hovering stably due to optical flow positioning, and a close-up of the brushless motor.

4.5 kamẹra isẹ

The DEERC D20S is equipped with a 1080p HD FPV camera. You can control the camera and view the live feed via the app.

• Ṣatunṣe Igun Kamẹra: Use the dedicated buttons on the remote control to adjust the camera's vertical angle (up/down) during flight.
• Fọto/Fidio: Use the app interface or dedicated buttons on the remote control to capture photos (2 MP effective still resolution, JPEG format) or record videos (1080p resolution, MP4 format).

Image: Details of the 1080P HD FPV camera, including 90° remote adjustable FOV and comparison of 1080p vs 720p video quality.

5. Itọju

• Ninu: Regularly clean the drone body and propellers with a soft, dry cloth. Avoid using water or solvents.
• Rirọpo Propeller: Inspect propellers for damage before each flight. Replace any bent or broken propellers using the provided screwdriver and spare parts.
• Itọju Batiri: Store batteries in a cool, dry place. Do not overcharge or over-discharge batteries. Disconnect batteries from the drone when not in use.

6. Laasigbotitusita

If the drone fails to take off or exhibits unstable flight, ensure the following:

• All propellers are correctly installed and undamaged.
• Batteries (drone and remote) are fully charged.
• The drone is placed on a flat, level surface before pairing and takeoff.
• The remote control is properly paired with the drone.
• Perform a calibration if flight is unstable (refer to manual for calibration steps).

7. Awọn pato

8. Atilẹyin ọja ati Support

For warranty information, technical support, or replacement parts, please refer to the contact information provided in the product packaging or visit the official DEERC webojula.

DEERC offers protection plans for extended coverage. Please check the product listing or DEERC's official channels for details on available 2-Year and 3-Year Protection Plans, as well as Complete Protect options.