JOYTUTUS Wireless RGB 8 Gang Switch Panel Instruction Manual

1. Ọja Ipariview

The JOYTUTUS Wireless RGB 8 Gang Switch Panel is a universal circuit control relay system designed to manage up to eight auxiliary electrical devices in vehicles such as trucks, boats, UTVs, SUVs, and pickups. It features wireless control, customizable RGB lighting, and multiple operating modes for enhanced functionality and convenience.

Image 1.1: The JOYTUTUS Wireless RGB 8 Gang Switch Panel with all included accessories.

2. Alaye Aabo

• Always disconnect the vehicle's battery before performing any electrical installation to prevent electrical shock or damage.
• Ensure all wiring connections are secure and properly insulated to avoid short circuits.
• Verify that the total current draw of connected accessories does not exceed the panel's maximum current rating (80A) or the individual circuit's fuse rating.
• Install the control box in a location protected from excessive heat, moisture, and physical damage.
• Use appropriate personal protective equipment, such as gloves and eye protection, during installation.

3. Package Awọn akoonu

The following components are included in your JOYTUTUS Wireless RGB 8 Gang Switch Panel kit:

• Wireless 8 Gang Switch Panel
• Circuit Control Box (Fuse Box)
• Yiyi Fifọ (100A)
• Positive and Negative Pole Harnesses
• Okun Ngba agbara USB
• Antenna and Adhesive
• Awọn asopọ Zip (10x)
• Screwdriver
• Fuse Link Wire (Green)
• Dabaru tosaaju
• Spare Brackets (for control box and switch panel)
• 140 Customizable Stickers
• Ilana itọnisọna

4. Itọsọna fifi sori ẹrọ

This section provides detailed steps for installing your switch panel system. For a visual guide, please refer to the installation video below.

4.1 Control Box Mounting

1. Select a suitable location in your vehicle's engine bay for the circuit control box. Ensure it is away from moving parts and excessive heat.
2. Attach the appropriate mounting bracket to the control box using the provided screws. For Wrangler JL (2018-2023) models, a dedicated bracket is included that requires no additional drilling. Universal brackets are also provided for other vehicles.
3. Secure the control box with its bracket to the chosen location in the engine bay.

Image 4.1: Various mounting brackets for the control box, including a specific one for Wrangler JL models.

4.2 Awọn isopọ onirin

Refer to the wiring diagram for proper connection of the control box to your vehicle's electrical system and accessories.

Image 4.2: Wiring diagram illustrating connections for the control box and individual circuits.

1. Connect the positive (+) terminal of the control box to the positive terminal of your vehicle's battery using the provided positive pole harness.
2. Connect the negative (-) terminal of the control box to the negative terminal or a suitable ground point on your vehicle's chassis using the provided negative pole harness.
3. Install the 100A circuit breaker between the positive terminal of the battery and the control box for overcurrent protection.
4. Connect the ACC (Accessory) wire from the control box to an ignition-switched power source using the fuse link wire. This ensures the panel powers on and off with the vehicle's ignition.
5. Connect your auxiliary lights or other electrical devices to the corresponding output terminals on the control box. Each output is individually fused.
6. Connect the antenna to the designated port on the control box. Position the antenna for optimal signal reception.

4.3 Switch Panel Installation

The switch panel can be installed in various locations within your vehicle's cabin. Two common methods are:

1. Method 1 (Surface Mount): Attach the switch panel mounting bracket to a flat surface using screws. Then, slide the switch panel onto the bracket.
2. Method 2 (Flush Mount): Use the flush mount bracket to integrate the switch panel into a dashboard opening or other custom location.

Image 4.3: Customizing the switch panel with stickers and two installation methods.

4.4 fifi sori Video

Video 4.1: Official JOYTUTUS installation and feature demonstration video for the Wireless RGB 8 Gang Switch Panel.

5. Awọn ilana Iṣiṣẹ

The wireless switch panel provides intuitive control over your connected accessories.

5.1 Ipilẹ isẹ

• Bọtini agbara: Press the red power button to turn the entire switch panel ON or OFF. The panel features a memory function that recalls the last setting when powered on.
• Awọn Yipada Olukuluku: Each of the eight buttons controls a separate circuit. Press a button to activate or deactivate the connected accessory.

Image 5.1: The switch panel mounted on a dashboard, demonstrating its compact design and accessible controls.

5.2 Brightness and Color Adjustment

• Atunse Imọlẹ: Use the dedicated brightness button (sun icon) to cycle through 5 levels of backlight brightness for the switch panel. This allows adaptation to different ambient light conditions.
• RGB Color Switching: Press the RGB button to cycle through 8 different backlight colors (white, red, blue, etc.) for the switch panel.

Image 5.2: Visual representation of the switch panel's 5-level brightness and 8 color options.

5.3 Awọn ọna itanna

The switch panel supports three distinct lighting modes for connected accessories:

• Toggle (Constant Light): Standard ON/OFF operation, providing continuous power to the accessory.
• Momentary (Ignition Power): Activates the accessory only while the button is pressed, suitable for horns or temporary functions.
• Pulsed (Strobe Mode): Causes the connected accessory to flash, ideal for warning lights or emergency signals.

These modes can be customized for individual switches to suit specific needs.

Aworan 5.3: Examples of accessories operating in Toggle, Momentary, and Pulsed modes.

6. Itọju

• Regularly inspect all wiring connections for tightness and corrosion.
• Check fuses periodically and replace any blown fuses with ones of the correct amperage. Spare fuses are included in the kit.
• Keep the control box and switch panel clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Ensure the antenna is securely connected and not obstructed for optimal wireless performance.

7. Laasigbotitusita

• No Power to Switch Panel: Check the main circuit breaker and all power connections to the control box. Ensure the vehicle's ignition is on if the ACC wire is connected.
• Ohun èlò ìbánisọ̀rọ̀ tí kò ṣiṣẹ́: Verify the individual fuse for the corresponding circuit in the control box. Check the wiring connection from the control box to the accessory.
• Intermittent Wireless Connection: Ensure the antenna is securely connected and positioned correctly. Check for any potential sources of interference.
• Switch Panel Backlight Issues: If the backlight is not functioning correctly, check the brightness and RGB color settings.

8. Awọn pato

9. Atilẹyin ọja ati Support

JOYTUTUS products are designed for durability and performance. For warranty information, technical support, or any questions regarding your Wireless RGB 8 Gang Switch Panel, please contact JOYTUTUS customer service through the retailer where the product was purchased or visit the official JOYTUTUS webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.