Ọrọ Iṣaaju
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your Barbie 24V Retro Scooter. Please read this manual thoroughly before initial use to ensure proper function and safety.
The Barbie 24V Retro Scooter is a vintage-inspired electric scooter designed for riders aged 13 and up, with a maximum weight capacity of 170 lbs (77 kg). It features a 24-volt lead-acid battery, an easy twist throttle, and a hand-operated brake, allowing for speeds up to 14 MPH. A convenient secret storage compartment is located under the seat.
Alaye Aabo
IKILO: Àìtẹ̀lé àwọn ìlànà ààbò wọ̀nyí lè yọrí sí ìpalára tàbí ikú ńlá.
- Nigbagbogbo wọ ibori ati jia aabo ti o yẹ (awọn paadi orokun, awọn paadi igbonwo) nigba gigun.
- Maṣe kọja opin iwuwo ti o pọju ti 170 lbs (77 kg).
- Recommended for riders aged 13 and up. Adult supervision is recommended for younger riders within this age range.
- Operate the scooter only in safe, open areas away from traffic, pedestrians, and obstacles.
- Avoid riding on wet surfaces, loose gravel, or uneven terrain.
- Maṣe gùn ni alẹ tabi ni awọn ipo hihan kekere.
- Keep fingers and other body parts away from moving parts, such as wheels and the motor.
- Never allow more than one rider on the scooter at a time.
- Always use the charger provided with the scooter.
- Do not modify the scooter or its components.
Ohun ti o wa ninu Apoti
Ni ṣiṣi package, jọwọ rii daju pe gbogbo awọn paati wa ati pe ko bajẹ:
- Barbie 24V Retro Scooter (Main Unit)
- Ṣaja
- Afowoyi Olumulo (iwe-ipamọ yii)
- Any included assembly tools (if applicable)
Ṣeto
Apejọ
Your Barbie 24V Retro Scooter may require minor assembly upon unboxing. Please follow the specific instructions provided in the separate assembly guide (if included) or refer to the diagrams below for common assembly points.
Typical assembly steps may include attaching the handlebars, front wheel, or seat. Ensure all bolts and fasteners are securely tightened before use.
Figure 1: Fully assembled Barbie 24V Retro Scooter, showcasing its pink color and retro design.
olusin 2: Iwaju view of the scooter, highlighting the headlight and handlebar setup.
Gbigba agbara ni ibẹrẹ
Before the first ride, the scooter's 24V lead-acid battery requires a full charge. This initial charge is crucial for battery longevity and performance.
- Wa ibudo gbigba agbara lori ẹlẹsẹ.
- Rí i dájú pé a ti pa kẹ̀kẹ́ náà.
- So ṣaja naa pọ mọ ibudo gbigba agbara ti ẹlẹsẹ naa.
- Pulọọgi ṣaja sinu boṣewa ogiri iṣan.
- Allow the scooter to charge for approximately wakati meji 12 for the first charge. Subsequent charges may take less time, typically 8-10 hours, or until the charger's indicator light signals a full charge (refer to charger instructions).
- Ma ṣe gba agbara si batiri ju. Ge asopọ ṣaja ni kete ti gbigba agbara ti pari.
Awọn ilana Iṣiṣẹ
Bibẹrẹ Scooter
- Rii daju pe ẹlẹsẹ naa ti gba agbara ni kikun.
- Yipada agbara si ipo "ON".
- Place one foot on the scooter deck and push off with the other foot to gain initial momentum.
- Once moving, slowly twist the throttle grip on the handlebar to accelerate.
olusin 3: Apa view of the scooter, showing the overall profile and wheel placement.
Braking
The scooter is equipped with a hand-operated brake for controlled stopping.
- To slow down or stop, gently squeeze the brake lever located on the handlebar.
- Apply the brake smoothly to avoid sudden stops, which can lead to loss of balance.
- Release the throttle when braking.
Secret Storage Compartment
The scooter features a secret storage compartment located under the seat. This can be used to carry small personal items.
- To access, lift the seat.
- Ensure the compartment is securely closed before riding.
olusin 4: Ẹyìn view of the scooter, showing the seat and potential access to the storage compartment.
Itoju
Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti ẹlẹsẹ rẹ.
Itọju Batiri
- Charge the battery after each use, even if only for a short period.
- If storing the scooter for an extended period, charge the battery fully once a month to prevent deep discharge.
- Lo ṣaja ti a pese nikan.
- Do not store the scooter in extreme temperatures (hot or cold).
Ninu
- Pa ẹlẹsẹ-ẹsẹ nu pẹlu ipolowoamp asọ lẹhin ti kọọkan lilo.
- Maṣe lo awọn kemikali lile tabi awọn afọmọ abrasive.
- Do not spray water directly onto electrical components.
Ayẹwo gbogbogbo
- Before each ride, check that all bolts and fasteners are tight.
- Inspect tires for wear and proper inflation (if applicable, solid wheels are listed in specs).
- Test the brake functionality.
- Check for any visible damage to the frame, wheels, or electrical components.
olusin 5: Isunmọ view of the front wheel and fender, important for routine inspection.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Scooter ko ni tan. | Batiri ko gba agbara. Agbara yipada ni PA. Loose itanna asopọ. | Gba agbara si batiri ni kikun. Tan yipada agbara si ON. Check all connections; consult support if issue persists. |
| Scooter runs slowly or loses power quickly. | Battery is low or not holding a charge. Overweight rider. Riding uphill or on rough terrain. | Recharge the battery. If battery life is consistently short, it may need replacement. Ensure rider weight is within limits. Ride on flat, smooth surfaces for optimal performance. |
| Bírékì kò ṣiṣẹ́ dáadáa. | Brake cable needs adjustment. Worn brake pads. | Adjust the brake cable tension. Ṣayẹwo awọn paadi idaduro fun yiya ati rọpo ti o ba jẹ dandan. |
| Awọn ariwo ti ko wọpọ lakoko iṣẹ. | Awọn paati alaimuṣinṣin. Debris in wheels or motor. | Inspect all parts for looseness and tighten as needed. Clear any debris from wheels and motor area. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Hyper |
| Orukọ awoṣe | Barbie 24V Retro Scooter |
| ASIN | B0CQS2H24X |
| UPC | 690995990396 |
| Àwọ̀ | Pink Pink |
| Ibiti ọjọ ori (Ti ṣeduro) | 13 years and up (Manufacturer recommended: 8 years and up, but product description states 13+) |
| Iwọn Idiwọn | 170 iwon (77 kg) |
| Awọn iwọn Ọja (L x W x H) | 45.5" x 12.5" x 22.5" |
| Nọmba ti Wili | 2 |
| Ohun elo fireemu | Alloy Steel or Aluminum |
| Kẹkẹ Iru | ri to |
| Brake Style | Rear Braking (Hand-operated) |
| Mọto | Single-speed electric motor |
| Iyara ti o pọju | Titi di 14 mph |
Figure 6: Scooter dimensions: 45.5" L x 12.5" W x 22.5" H.
Atilẹyin ọja ati Support
Specific warranty details for the Barbie 24V Retro Scooter are typically provided with the product packaging or on the manufacturer's official website. Please refer to the documentation included with your purchase for precise warranty terms and conditions.
For technical support, replacement parts, or further assistance, please contact Hyper customer service. Contact information can usually be found on the product packaging, the manufacturer's webojula, tabi nipasẹ rẹ alagbata.
Olupese: Hyper
Ile Itaja Brand: Ṣabẹwo si Ile itaja Hyper lori Amazon
