1. Ifihan
The Speedlink TOKEN RGB Gaming Stereo Speaker system delivers powerful stereo sound combined with dynamic RGB lighting, enhancing your gaming and multimedia experience. Designed for versatility, it offers both wired and wireless connectivity options, making it suitable for various devices including PCs, laptops, tablets, and smartphones.
This manual provides detailed instructions on setting up, operating, and maintaining your Speedlink TOKEN speakers to ensure optimal performance and longevity.
Image 1: Speedlink TOKEN RGB Gaming Stereo Speakers with wired remote control.
2. Package Awọn akoonu
Jọwọ ṣayẹwo package fun awọn nkan wọnyi:
- 2 x Speedlink TOKEN RGB Stereo Speakers
- Integrated Wired Remote Control (attached to speakers)
- USB-A Power Cable (integrated)
- 3.5mm Jack Audio Cable (integrated)
3. Eto
3.1 ti ara Asopọ
- Ipo: Place the two speaker units on either side of your monitor or desired listening area. The cable length between satellites is 1.2 meters (2x0.6m), providing flexibility for optimal stereo separation.
- Asopọ agbara: Connect the integrated USB-A cable to an available USB port on your computer, laptop, or a USB power adapter (not included). The speakers are powered via USB.
- Asopọ ohun:
- Jack 3.5mm: For wired audio, connect the integrated 3.5mm audio jack to the audio output port (headphone jack) of your computer, laptop, tablet, or smartphone.
- Bluetooth: For wireless audio, ensure the speakers are powered on. The speakers will automatically enter Bluetooth pairing mode if no 3.5mm connection is detected or selected.
Image 2: USB Power Connection.
Image 3: Audio Connection Options (Bluetooth and 3.5mm Jack).
4. Awọn ilana Iṣiṣẹ
The Speedlink TOKEN speakers are controlled via the integrated wired remote control.
Image 4: Wired Remote Control.
4.1 Agbara Tan / Pa ati Iṣakoso iwọn didun
- Agbara: Use the dedicated power button on the wired remote to turn the speakers on or off.
- Iwọn didun: Adjust the volume using the rotary dial or slider on the wired remote.
4.2 Switching Audio Input (Jack / Bluetooth)
The wired remote control features a button to switch between the 3.5mm jack input and Bluetooth input. Press this button to toggle between the two modes.
4.3 Sisopọ Bluetooth
- Ensure the speakers are powered on and the Bluetooth input mode is selected (indicated by an LED on the remote).
- On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
- Wa fun available devices. The speakers should appear as "Speedlink TOKEN" or similar.
- Select the speakers to pair. Once paired, the Bluetooth indicator on the remote will stabilize, and you can play audio wirelessly.
Awọn ọna Imọlẹ RGB 4.4
The Speedlink TOKEN speakers feature six different RGB lighting modes, including a music-reactive mode. Use the dedicated lighting button on the wired remote to cycle through the modes or to turn the lighting off.
- Press the lighting button repeatedly to switch between the available RGB effects.
- One of the modes is a dynamic RGB effect that reacts to the music/sound being played.
- To deactivate the lighting, continue pressing the button until the lights turn off.
Note: The lighting settings may not be retained after the speakers are powered off or disconnected from power. You may need to re-select your preferred lighting mode upon restart.
5. Itọju
Itọju to dara ṣe idaniloju gigun ati iṣẹ ti awọn agbohunsoke rẹ.
- Ninu: Use a soft, dry cloth to wipe the speaker surfaces. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
- Eruku: Regularly remove dust from the speaker grilles using a soft brush or compressed air.
- Ifihan Olomi: Avoid exposing the speakers to liquids. They are not waterproof.
- Ibi ipamọ: Nigbati o ko ba wa ni lilo fun awọn akoko ti o gbooro sii, tọju awọn agbohunsoke ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
6. Laasigbotitusita
If you encounter issues with your Speedlink TOKEN speakers, please refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si ohun lati awọn agbohunsoke. |
|
|
| Bluetooth connection is unstable or drops out. |
|
|
| RGB lighting settings reset after power cycle. |
|
|
| Speakers are powered on but no RGB lighting. |
|
|
7. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | TOKEN RGB Gaming Speaker |
| Nọmba awoṣe | SL-810008-BK |
| Brand | Speedlink |
| Asopọmọra Technology | Auxiliary (3.5mm Jack), Bluetooth |
| Agbọrọsọ Iru | Multimedia |
| Ipo Ijade Ohun | Sitẹrio |
| Kakiri Ohun ikanni iṣeto ni | 2.0 |
| O pọju Agbọrọsọ o wu Power | 12 Wattis |
| Ipalara | 4 ohms |
| Idahun Igbohunsafẹfẹ | 20000 kHz |
| Adarí Iru | Iṣakoso Latọna jijin (Ti firanṣẹ) |
| Pataki Awọn ẹya ara ẹrọ | Bluetooth, LED Light, RGB |
| Awọn iwọn Ọja (L x W x H) | 8.5 x 8.1 x 16.2 cm (3.35 x 3.19 x 6.38 inches) |
| Iwọn Nkan | 700 Giramu (1.54 lbs) |
| USB/Jack Cable Length | 1.2 mita (3.94 ẹsẹ) |
| Cable Length Between Satellites | 1.2 meters (2x0.6m) (3.94 feet) |
| Orisun agbara | USB-A |
| Ohun elo | Ṣiṣu |
| Àwọ̀ | Dudu |
8. Atilẹyin ọja ati Support
8.1 Olupese ká atilẹyin ọja
The Speedlink TOKEN RGB Gaming Stereo Speaker comes with a 2-odun olupese ká atilẹyin ọja. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
Atilẹyin ọja naa ko ni aabo fun ibajẹ ti o ṣẹlẹ nipasẹ ilokulo, ijamba, iyipada laigba aṣẹ, tabi awọn okunfa ita gẹgẹbi awọn iwọn agbara.
8.2 Onibara Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Speedlink website or contact their customer support. Refer to the product packaging or Speedlink's official webojula fun awọn julọ soke-si-ọjọ alaye olubasọrọ.
Webojula: www.speedlink.com
