1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of your PUTORSEN Monitor Wall Mount. This heavy-duty wall-mounted monitor arm is designed to support ultrawide screens up to 49 inches and weighing up to 44 lbs. It features a gas spring for smooth adjustments, along with tilt, swivel, and rotation capabilities to optimize your viewing experience and reclaim desk space.
Jọwọ ka iwe afọwọkọ yii daradara ṣaaju fifi sori ẹrọ ati da duro fun itọkasi ọjọ iwaju.
Image 1.1: The PUTORSEN Monitor Wall Mount installed with a 49-inch ultrawide monitor, showcasing its strength and stability.
2. Alaye Aabo
- Agbara iwuwo: Do not exceed the maximum weight capacity of 44 lbs (20 kg). Exceeding this limit may result in serious injury or product damage.
- Iwọn iboju: Ni ibamu pẹlu awọn diigi lati 17 si 49 inches.
- Ibamu VESA: Rí i dájú pé àtẹ̀lé rẹ ní àwọn ìlànà ìfìsọfúnni VESA ti 75x75mm tàbí 100x100mm.
- Odi Iru: This mount is designed for installation on wood stud walls, brick walls, or concrete walls. DO NOT mount solely on drywall. Drywall cannot support the weight of the mount and monitor.
- Fifi sori Ọjọgbọn: Tí o kò bá ní ìdánilójú nípa ìlànà ìfisílé tàbí irú ògiri, kan sí ògbóǹtarìgì tó mọ̀ nípa rẹ̀.
- Ikilọ orisun omi Gaasi: The gas spring is under pressure. Exercise caution during assembly and adjustment. Do not attempt to disassemble the gas spring cylinder.
- Awọn ọmọde: Pa awọn ẹya kekere kuro lati ọdọ awọn ọmọde.
3. Package Awọn akoonu
Please verify that all components are present and undamaged before proceeding with installation. All necessary hardware for installation is included.
Note: An ultrawide adapter for monitors with circular/non-standard VESA patterns is not included. Check your monitor's original packaging for a conversion adapter if needed.
4. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | PUTORS |
| Awoṣe | B0CZDS7RYY |
| Ohun elo | Acrylonitrile Butadiene Styrene (ABS), Alloy Steel, Aluminum |
| Àwọ̀ | Dudu |
| Iṣagbesori Iru | Ògiri Ògiri |
| Iṣipopada Iru | Swivel, Tilt, Rotation, Height Adjustment |
| Atẹle Iwon Ibamu | 17"-49" (alapin tabi te) |
| Agbara iwuwo | Titi di 44 lbs (20 kg) |
| VESA ibamu | 75x75mm, 100x100mm |
| Titẹ Range | +50° si -20° |
| Swivel Ibiti | ±90° |
| Yiyi Ibiti | 360° (± 180°) |
| Atunṣe Giga | Up to 11.34 inches (via gas spring) |
| Wall Distance (Min/Max) | 4.15" / 22.58" |
| Iwọn Nkan | 8.16 iwon |
Image 4.1: Detailed product dimensions and movement ranges. Verify your monitor's VESA specifications before purchase.
5. Eto & Fifi sori
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during certain stages of installation, especially when mounting the monitor.
5.1 Choose a Mounting Location
- Identify a suitable wall location that can support the combined weight of the mount and your monitor.
- Ensure the wall is a wood stud, brick, or concrete wall. Avoid drywall-only installations.
- Use a stud finder to locate the center of a wood stud if mounting on a wood stud wall.
5.2 Attach Wall Plate
- Position the wall plate at the desired height and mark the drilling locations.
- Drill pilot holes according to the provided template and hardware instructions.
- Secure the wall plate to the wall using the appropriate screws and anchors for your wall type. Ensure it is firmly attached.
5.3 Assemble Arm Sections
- Connect the arm sections as shown in the assembly diagram. The modular design allows for straightforward assembly.
- Rii daju pe gbogbo awọn asopọ wa ni wiwọ ati aabo.
Image 5.1: Streamlined installation process, illustrating modular assembly and compatible wall types. Remember: Do not mount solely on drywall.
5.4 So VESA Awo lati Atẹle
- Fi pẹ̀lẹ́pẹ̀lẹ́ gbé ojú monitor rẹ sí orí ilẹ̀ tó rọ̀, tó sì mọ́.
- Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
- Secure the VESA plate to the monitor using the provided screws. Do not overtighten.
Image 5.2: The heavy-duty tilt mechanism and VESA interface. Ensure proper alignment and secure fastening of the VESA plate to your monitor.
5.5 Mount Monitor to Arm
- With assistance, carefully lift the monitor with the attached VESA plate.
- Slide the VESA plate onto the monitor arm's mounting head until it clicks into place or is securely fastened.
- Tighten any safety screws or mechanisms to prevent accidental dislodgement.
5.6 USB Management
- Route monitor cables through the integrated cable management channels on the arm.
- This helps maintain a neat and clutter-free workspace.
Image 5.3: Reinforced base with integrated cable management for a clean setup.
6. Awọn ilana Iṣiṣẹ
The PUTORSEN Monitor Wall Mount offers full motion capabilities for optimal viewinu itunu.
6.1 Height Adjustment (Gas Spring)
- To adjust the monitor height, gently push or pull the monitor to the desired position. The gas spring system allows for smooth vertical movement up to 11.34 inches.
- If the arm does not hold its position or is difficult to move, refer to the "Troubleshooting" section for gas spring tension adjustment.
6.2 Pulọọgi Atunṣe
- The monitor can be tilted +50° upwards and -20° downwards.
- Loosen the tilt adjustment screw slightly, adjust the monitor to the desired angle, then re-tighten the screw to secure it.
6.3 Swivel Atunṣe
- The monitor arm allows for a ±90° swivel range.
- Gently rotate the monitor horizontally to achieve your preferred viewigun igun.
6.4 Àtúnṣe Ìyípo
- The VESA plate allows for a full 360° rotation (±180°).
- Rotate the monitor to switch between landscape and portrait orientations as needed.
Image 6.1: The monitor arm's extendable design allows for flexible positioning and space optimization.
7. Itọju
- Ninu: Lo asọ, damp cloth to clean the surface of the mount. Avoid harsh chemicals or abrasive cleaners.
- Awọn ayẹwo igbakọọkan: Lokọọkan ṣayẹwo gbogbo awọn skru ati awọn asopọ lati rii daju pe wọn wa ni wiwọ ati aabo. Tun-mu ti o ba wulo.
- Gaasi orisun omi: The gas spring is designed for long-term performance. No specific maintenance is required for the gas spring itself, but ensure its tension is correctly adjusted for your monitor's weight.
8. Laasigbotitusita
| Isoro | Ojutu |
|---|---|
| Arm will not raise: Monitor feels too heavy, arm sags. | Tighten the gas spring adjustment screw in the "+" direction (counter-clockwise) until the arm can hold the monitor's weight. |
| Arm will not lower: Monitor feels too light, arm stays up. | Loosen the gas spring adjustment screw in the "-" direction (clockwise) until the arm can be lowered smoothly. |
| Tilt is too loose: Monitor tilts freely or sags. | Tighten the tilt adjustment screw clockwise to prevent the monitor from lowering. |
| Tilt is too stiff: Difficult to adjust monitor tilt. | Loosen the tilt adjustment screw counter-clockwise for smoother movement. |
| Oke kan lara riru. | Ensure all mounting screws are securely tightened. Verify the wall type is appropriate and the mount is anchored correctly. |
| Cables are messy. | Utilize the integrated cable management channels on the arm to route and conceal cables. |
Image 8.1: Joint adjustment guide for gas spring tension and tilt mechanism.
9. Atilẹyin ọja & Atilẹyin
PUTORSEN products are manufactured with quality and durability in mind. While specific warranty details may vary by region and retailer, we stand by the quality of our products.
Atilẹyin Onibara: Our dedicated customer support team is available to assist with any installation guidance, compatibility questions, or usage concerns you may have. We are committed to providing clear and practical support to ensure a smooth experience with your product.
For assistance, please refer to the contact information provided with your purchase or visit the official PUTORSEN webojula.
